Centerless Grinders

Product Details:

Centerless Grinding Machine made by Magnaghi (Italy) in excellent working condition. The Grinding Wheel Diameter is 350 mm and the Job Diameter range is from 2 mm to 85 mm. The technical details are as follows -

Make - Magnaghi (Italy)
Model - RSC-350
Job Grinding Diameter - 2 mm to 85 mm
Max. Grinding Wheel Diameter - 350 mm
Max. Control Wheel Diameter - 250 mm
Max. Width of Wheel - 120 mm
Width of Currently installed Wheel - 100 mm
Control Wheel Feed Angle - +5 degree to -5 degree
Control Wheel Speeds - 18 rpm / 24 rpm / 34 rpm / 250 rpm
- Equipped with Hydraulic Wheel Dressers.
- Machine is in excellent working condition.

Product Details:

Ghiringhelli (Italy) make Centerless Grinding Machine in excellent working condition. The Grinding Wheel Diameter is 500 mm and the Wheel Width is 200 mm. The model of the machine is M2120 and it is an Automatic Type Centerless Grinder Machine. The technical details are as follows -

Make - Ghiringhelli (Italy)
Model - M2120
Grinding Wheel Diameter - 500 mm
Wheel Width - 200 mm
Control Wheel Diameter - 300 mm
Tilting Angle of Control Wheel - 5 degree to -5 degree
- Equipped with Hydraulic Wheel Dressers.
- Automatic Depth Increase of the Grinding Wheel Dresser.
- Can work in Manual, Semi-Automatic & in Fully Automatic Plunge Grinding Cycle.
- Control Wheel can be titled for Through-Feed Grinding.
- Control Wheel can be rotated for Taper Grinding.
- Infinitely Variable Speeds of the Control Wheel.- Electrical Drawings & Hydraulic Drawings are available.
- Machine is in excellent working condition.

Product Details:

Centerless Grinding Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is BBJ 6 and the Job Diameter Range is from 3 mm to 60 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - BBJ 6
Job Diameter - 3 mm to 60 mm
Grinding Wheel Size - Diameter 350 mm x 100 mm Width
Control Wheel Size - Diameter 250 mm x 100 mm Width
Control Wheel Slide Swivel Angle - 4 degree to -2 degree (for Taper Jobs)
Control Wheel Feed Angle - 4 degree to -2 degree
Least Count - 1 Micron (0.001 mm)
- Equipped with Hydraulic Wheel Dressers.
- Profile Dressing is possible on both the wheels.
- Complete with Magnetic Filtration Unit, Coolant Tank & Pump.
- Lots of spare support plates are available.
- Electrical Drawing of the machine is available.
- Machine is in excellent working condition.

Product Details:

Ghiringhelli (Italy) make Automatic Centerless Grinding Machine in excellent working condition. The Grinding Wheel Diameter is 500 mm and it is a fully automatic type machine with automatic Rapid & Feed Travels if the Control Wheel. The technical details are as follows -

Make - Ghiringhelli (Italy)
Model - M120
Max. Job Diameter - 100 mm
Grinding Wheel Diameter - 500 mm
Control Wheel Diameter - 300 mm
Wheel Width - 127 mm
Tilting Angle of Control Wheel - 5 degree to -5 degree
Least Count of Automatic Feed Travel - 2.5 microns (0.0025 mm)
Weight of the Machine - 4.75 tons (Approximately)
- Automatic Rapid & Feed Travels of the Control Wheel.
- Can work in Manual, Semi-Automatic & in Fully Automatic Mode.
- Infinitely Variable Speeds of the Control Wheel.
- Equipped with a Diamond Grinding Wheel.
- Complete with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Magnaghi (Italy) make Automatic Centerless Grinding Machine in excellent working condition. The Job Diameter range is from 2 mm to 85 mm. The machine has Automatic Rapid & Feed Travels of the Control Wheel. The technical details are as follows -

Make - Magnaghi (Italy)
Job Grinding Diameter - 2 mm to 85 mm
Max. Grinding Wheel Size - 350 mm Diameter x 120 mm Width
Max. Control Wheel Size - 250 mm Diameter x 120 mm Width
Control Wheel Feed Angle - +5 degree to -5 degree
Width of Currently Installed Wheels - 100 mm
Control Wheel Speeds - 18 rpm to 250 rpm
- Equipped with Hydraulic Wheel Dressers.
- Automatic Rapid & Feed Travels of the Control Wheel.
- It can work in Manual, Semi-Automatic & in Fully Automatic Mode.
- Machine is in excellent working condition.

Product Details:

Centerless Grinding Machine made by Magnaghi (Italy) in excellent working condition. The model of the machine is RSC-350 and the Job Diameter range is from 2 mm to 85 mm. The machine can do Infeed and Thru-feed Grinding operations. The technical details are as follows -

Make - Magnaghi (Italy)
Model - RSC-350
Job Grinding Diameter - 2 mm to 85 mm
Grinding Wheel Size - 350 mm Diameter x 120 mm Width
Control Wheel Size - 250 mm Diameter x 120 mm Width
Control Wheel Feed Angle - +5 degree to -5 degree
Control Wheel Speeds - 18 rpm / 24 rpm / 34 rpm / 250 rpm
- Equipped with Hydraulic Wheel Dressers.
- Lots of accessories like spare flanges, wheels, guide plates etc.
- Equipped with a "Job Pusher" arrangement for Infeed operations.
- Machine is in excellent working condition.

Product Details:

Make - Magnaghi (Italy)
Model - RSC 350
Job Grinding Diameter - 2 mm to 85 mm
Max. Grinding Wheel Size - 350 mm Diameter x 120 mm Width
Max. Control Wheel Size - 250 mm Diameter x 120 mm Width
Control Wheel Feed Angle - 5° to -5°
Width of Currently Installed Wheels - 100 mm
Grinding Wheel Speed - 1800 rpm
Control Wheel Speeds - 18 rpm to 250 rpm
- Equipped with Hydraulic Wheel Dressers.
- Complete with spare guide blades, coolant tank, pump etc.
- Machine is in excellent working condition.

Product Details:

Cimat (Italy) make Heavy duty Centerless Grinding Machine in excellent working condition. The model of the Machine is SC 2 B12 and the Grinding Wheel Diameter is 500 mm and 200 mm Width. The machine has Automatic Rapid, Plunge & Feed Travels and can work in complete Auto-Cycle Mode. The machine is complete with spare NEW grinding wheels, work rest, supports and many other accessories. The technical details are as follows -

Make - Cimat (Italy)
Model - SC 2 B12
Grinding Wheel Diameter - 500 mm
Grinding Wheel Width - 200 mm
Regulating Wheel Diameter - 300 mm
Regulating Wheel Width - 200 mm
Least Count (for Auto-Cut) - 1 Micron (0.001 mm)
Regulating Wheel Feed Angle - +7.5 degree to -7.5 degree
- Features like Automatic Rapid, Plunge and Auto-Cut (Feed) Travels.
- Machine can work in complete Auto-Cycle Mode.
- Lots of NEW spare Grinding & Regulating Wheels available.
- Accessories like Guide Plates, Work-Rests, Job Supports etc. etc.
- Machine is in excellent working condition.

Product Details:

Cincinnati (USA) make Centerless Grinding Machine in excellent working condition. The model of the Machine is 2 OM and the Grinding Wheel Diameter is 500 mm and 250 mm Width. The machine is complete with spare NEW grinding wheels, work rest, supports and many other accessories. The technical details are as follows -

Make - Cincinnati (USA)
Model - 2 OM
Job Grinding Capacity - 1.5 mm to 120 mm
Grinding Wheel Diameter - 500 mm
Grinding Wheel Width - 250 mm
Regulating Wheel Diameter - 300 mm
Regulating Wheel Width - 250 mm
Least Count - 2.5 Microns (0.0025 mm)
Regulating Wheel Speeds - 12 rpm to 300 rpm
Regulating Wheel Feed Angle - +8 degree to -8 degree
- Features like automatic Hydraulic Rough & Fine Cut (Feed Travel).
- Taper & Profile Dressing of Wheels possible.
- Lots of NEW spare Grinding & Regulating Wheels available.
- Accessories like Guide Plate, Work-Rest, Job Supports etc. etc.
- Machine is in excellent working condition.