Gear Grinding Machine

Product Details:

Fritz Werner (Germany) make Spline Shaft Grinding Machine in excellent working condition. The model of the machine is 3.275-1.5 and the Maximum Length of Job is 1500 mm. The machine is complete with lots of NEW spare grinding wheels, Index plates, Job Carriers and a lot of other accessories. The technical details are as follows -

Make - Fritz Werner (Germany)
Model - 3.275-1.5
Center Height - 145 mm
Max. Diameter of the Job - 275 mm
Max. Length of the Job - 1500 mm
Grinding Wheel Diameter - 75 mm
Grinding Wheel Speeds - 7,600 rpm
Table Travels - Hydraulic
- Features like Automatic Indexing, Automatic Depth Adjustment "Auto-Cut".
- Equipped with a Wheel Dresser.
- With lots of spare NEW Grinding Wheels, Index Plates, Chuck, Job Carriers etc.
- With Levelling Pads, spare NEW Wheel Dressers, & many other accessories.
- Machine is in excellent working condition.

Product Details:

Reishauer (Switzerland) make Gear Grinding Machine in excellent working condition. The model of the machine is ZA and the Max. Gear Diameter is 240 mm. The machine is complete with Wheel Dresser, Mandrels, Crushers, Operating Manual, Electrical Drawings, Coolant Tank, Pump etc. The technical details are as follows -

Make - Reishauer (Switzerland)
Model - ZA
Max. Gear Diameter - 240 mm
Max. Module - 4 module
Min. Module - 0.5 module
Max. Grinding Length - 170 mm
Number of Teeth - 12 to 130
Max. Clamping Length - 450 mm
Max. Grinding Wheel Diameter - 350 mm
Maximum Helical Angle - 45 degrees (both sides)
Minimum Gear Diameter - 10 mm
- Equipped with Crusher type Wheel Dresser Unit.
- With 2 other Wheel Dressing Attachments, mandrels, fixtures etc.
- With spare Grinding Wheels & Flanges, many Crushers, Change Gears etc.
- Operating Manual & Electrical Drawings are available.
- Complete with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

WMW Niles (Germany) make Gear Grinding Machine in excellent working condition. The model of the machine is ZSTZ 315 x 6 and the Maximum Gear Diameter is 315 mm. The machine is capable of Spur and Helical Gear Grinding operations. It is complete with its Change Gears and Operating Manual. The technical details are as follows -

Make - WMW Niles (Germany)
Model - ZSTZ 315 x 6
Max. Gear Diameter - 315 mm
Min & Max. Module - 1.5 to 6 module
Min. Gear Diameter - 30 mm
Max. Width of Gear - 100 mm
Max. Helix Angle - 45 Degree
Grinding Wheel Diameter - 240 mm
Ram Stroke Rate - 50 to 280 strokes/min
- Complete with change gears, operating manuals etc.
- Machine is in excellent working condition.

Product Details:

WMW Niles (Germany) make Automatic Gear Grinding Machine in excellent working condition. The model of this machine is ZSTZ 630 C2P and it is an Auto-Cycle type machine. The Maximum Gear Diameter in this machine is 630 mm and Maximum Module Capacity is 12 Modules. The machine is complete with Change Gears, Grinding Wheels, Wheel Flanges, Job Supports, Guides, Leveling Pads, Coolant Filtration Unit, Coolant Tank and Pump, Mandrels etc. Operating Manual, Electrical Drawings, and other documentation are also available with the machine. The technical details are as follows -

Make - WMW Niles (Germany)
Model - ZSTZ 630 C2P
Max. Gear Diameter - 630 mm
Min. and Max. Module Capacity - 1.5 to 12 Modules
Max. Width of Gear - 215 mm
Min. Gear Diameter - 50 mm
Min. and Max. Number of Teeth - 5 to 140
Max. Helix Angle - 45 degree
Grinding Wheel Size - Diameter 350 mm x 32 mm Width
Weight of the Machine - 7.25 tons
- Auto-Cycle Working with Auto-Dressing, Auto-Cut, Auto-Compensation etc.
- Machine can be used in Full-Auto, Semi-Auto, & also in Manual Mode.
- Complete with Change Gears, Grinding Wheels, Wheel Flanges.
- Complete with Job Supports, Job Guides, Leveling Pads, Mandrels etc.
- Complete with Coolant Filtration Unit, Coolant Tank and Pump.
- One of the latest models of conventional Gear Grinders (equipped with Ball-Screw).
- Operating Manuals, Electrical Drawings & other documentation is available.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Gear Grinding Machine in excellent working condition. This machine has been made under license of Reishauer and is the exact same machine as Reishauer NZA Gear Grinder. The model of the machine is OBP 32 and it is complete with lots of accessories including spare flanges, madrels, change gears, etc.The technical details are as follows -

Make - TOS (Czech Republic)
Model - OBP 32 (same as Reishauer NZA)
Max. Gear Diameter - 300 mm
Max. Module - 5 module
Min. Module - 0.5 module
Max. Width of Job - 170 mm
Number of Teeth - 12 to 130
Max. Clamping Length - 420 mm
Max. Grinding Wheel Diameter - 350 mm
Width of the Grinding Wheel - 62 mm / 84 mm
- Equipped with Grinding Wheel Dressers.
- Complete with Change Gears, Coolant Tank, Pump etc.
- With Wheel Crusher unit, extra wheels, flanges, madrels, collets etc.
- Operating Manual & Electrical Drawings are available.
- Machine is in excellent (as good as new) working condition.

Product Details:

Details:

• Equipped with AC Drive for Ram stroke movements.
• Complete with change gears, operating manuals etc.
• Machine is in excellent working condition.

Product Details:

WMW-Niles (Germany) make Gear Grinding Machine in excellent working condition.The model of this machine is ZSWZ 315 and the Maximum Gear Diameter is 315 mm.The technical details are as follows -

Make - WMW-Niles (Germany)
Model - ZSWZ 315
Min. & Max. Gear Diameter - 30 mm to 315 mm
Min. & Max. Module - 1.5 to 6 module
Max. Width of Gear - 100 mm
Max. Helix Angle - 45 Degree
Grinding Wheel Diameter - 240 mm
Ram Stroke Rate - 50 to 280 strokes/min
- Complete with change gears, & many other accessories.
- Operating Manual, Electrical Drawings etc. are available.
- Machine is in excellent working condition.

Product Details:

Details:

• Automatic Motorized Wheel Dressing.
• Machine is complete with change gears, coolant tank etc.
• Machine is in excellent working condition.