Internal Grinding Machine

Product Details:

Internal Grinding Machine made by Voumard (Switzerland) in excellent working condition. The model of the Machine is Type 5 and it is the Long Table design. The Max. Length of Work-Piece in this machine is more than the standard length as it is the Long Table design of the Voumard Type 5 Internal Grinder. The technical details are as follows -

Make - Voumard (Switzerland)
Model - Type 5 (Long Table)
Grinding Diameter Range - 5 mm to 200 mm
Center Height - 180 mm
Max. Swing Diameter of Job - 360 mm
Maximum Table Stroke - 600 mm
Max. Spindle Speed - 22,000 rpm
Max. Length of Work-Piece - 1500 mm
Work-Head Speeds - 50 rpm to 500 rpm
Work-Head Swivel Angle - 0 Degree to 25 Degree
- Features like Hydraulic Wheel-Dresser, Auto-Cut etc.
- Operating Manual & Electrical Drawings are available.
- Machine is in excellent working condition.

Product Details:

Voumard (Switzerland) make Internal Grinding Machine in excellent working condition. The model of this machine is 5A and it is a fully automatic (Auto-Cycle) machine.The technical details are as follows -

Make - Voumard (Switzerland)
Model - 5A
Grinding Diameter - 5 mm to 200 mm
Center Height - 180 mm
Max. Swing Diameter of Job - 360 mm
Grinding Depth - 250 mm
Maximum Table Stroke - 600 mm
Spindle Speeds - 3,600 rpm to 40,000 rpm
Work-Head Speeds - 125 rpm to 1,000 rpm
Work-Head Swivel - 0 Degree to 90 Degree
- Equipped with Face Grinding Attachment.
- Equipped with a Hydraulic Wheel-Dresser.
- Working in Auto Cycle.
- Operating Manual & Electrical Drawings available.
- Machine is in excellent working condition.

Product Details:

WMW (Germany) make Internal Grinding Machine with Face Grinding Attachment in excellent working condition.The model of the machine is SI 80x100 and the Center Height is 230 mm.The technical details are as follows -

Make - WMW (Germany)
Model - SI 80x100
Max. Grinding Internal Diameter - 80 mm
Max. Grinding Length of Job - 100 mm
Max. Outer Diameter of Job - 320 mm
Center Height - 230 mm
Table Travel - 300 mm
Max. Distance b/w Flange to Spindle Support - 780 mm
Work-Head Speeds - 280 rpm to 900 rpm
Work-Head Rotation - 0 Degree to 30 degree
- Equipped with a Hydraulic Wheel Dresser.
- Equipped with Face Grinding Attachment.
- Provision for Hydraulic Chuck / Collet System.
- Complete with Coolant Filtration Unit, Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Voumard (Switzerland) make Internal Grinding Machine in excellent working condition. The model of this machine is 5A and the Maximum Grinding Diameter is 200 mm. The technical details are as follows -

Make - Voumard (Switzerland)
Model - 5A
Grinding Diameter - 5 mm to 200 mm
Center Height - 180 mm
Max. Swing Diameter of Job - 360 mm
Grinding Depth - 250 mm
Maximum Table Stroke - 600 mm
Spindle Speeds - 3,600 rpm to 40,000 rpm
Work-Head Speeds - 125 rpm to 1,000 rpm
Work-Head Swivel - 0 Degree to 90 Degree
- Equipped with Face Grinding Attachment.
- Equipped with Hydraulic Wheel-Dresser.
- Auto Cycle Working.
- Operating Manual & Electrical Drawings available.
- Machine is in excellent working condition.

Product Details:

Voumard (Switzerland) make Internal Grinding Machine in excellent working condition. The model of the machine is 5s and the Internal Diameter Grinding Range is from 5 mm to 200 mm. The technical details are as follows -


Make - Voumard (Switzerland)
Model - 5s
Internal Diameter - 5 mm to 200 mm
Center Height - 180 mm
Max. Table Travel - 500 mm
Work-Head Speeds - 120 rpm to 1000 rpm
- Complete with Hydraulic Wheel-Dresser.
- Machine is in good working condition.

Product Details:

Omeca Matic (Italy) make Hydraulic Internal Grinding Machine in excellent working condition. The model of the machine is Mod. 5-200 and it is equipped with a Face Grinding Attachment. The technical details of the machine are as follows -

Make - Omeca Matic (Italy)
Model - Mod. 5-200
Min. & Max. Internal Grinding Diameter - 5 mm to 200 mm
Max. Outside Diameter of Job - 525 mm
Max. Travel of Table - 350 mm
Work-Head Speeds - 170 rpm to 1450 rpm
Work-Head Rotation - 0° to 90°
Max. Distance b/w Head & Spindle Support - 670 mm
- Equipped with Face Grinding Attachment.
- Equipped with Hydraulic Wheel Dresser.
- Lots of accessories like spare hydraulic chuck, different types of jaws, grinding wheels etc.
- Complete with operating manuals, electrical drawings etc.
- Machine can work in Automatic Cycle Operation.
- Machine is in excellent working condition

Product Details:

Make - Voumard (Switzerland)
Model - 5AGrinding Diameter - 5 mm to 200 mm
Grinding Depth - 250 mm
Center Height - 180 mm
Max. Swing Diameter of Job - 360 mm
Maximum Table Stroke - 600 mm
Spindle Speeds - 3,600 rpm to 40,000 rpm (continuously variable)
Work-Head Speeds - 125 rpm to 1000 rpm
Work-Head Swivel - 0° to 90°
- Equipped with VFD Drive to control Spindle Speeds.
- Complete with coolant filtration unit.
- Machine is in excellent working condition.

Product Details:

Details:

• Equipped with VFD Drive on the Spindle Motor.
• Infinitely variable speed on the work-head spindle (using a PIV gearbox).
• The machine can work in Auto-Cycle and also in manual mode.
• With Automatic Depth Adjustment Auto-Cut.
• Machine was previously being used in an aerospace company.
• Machine is in excellent working condition.

Product Details:

Make - WMW (Germany)
Model - SI 125x175
Max. Grinding Internal Diameter - 125 mm
Max. Grinding Length - 175 mm
Max. Outside Diameter of Job - 400 mm
Spindle Bore - 40 mm
- Complete with Coolant Tank & Pump.
- Complete with Operating Manual & some accessories.
- Machine is in excellent working condition.

Product Details:

Make - TOS (Czech Republic)
Model - BDA 80
Max. Grinding Diameter - 80 mm
Max. Travel of Table - 200 mm
Spindle Speed - 15,000 rpm to 40,000 rpm
Center Height - 165 mm
Max. Swing Diameter of Job - 330 mm
Max. Diameter of Job inside protection cover - 250 mm
Work-Head Swivel Range - 0° to 30°
Lateral Movement of Work-Head Slide - 140 mm
Chuck Diameter - 200 mm
- Equipped with Face Grinding Attachment (with Hydraulic Movement).
- Equipped with Hydraulic Wheel Dresser.
- Machine is complete with lots of accessories.
- Machine is in excellent working condition.

Product Details:

Make - Ribon (Italy)
Center Height - 165 mm
Max. Swing Diameter - 330 mm
Max. Table Travel - 400 mm
Max. Ground-able Internal Diameter - 200 mm
Spindle Diameter - 80 mm
Chuck Diameter - 155 mm
Table Movement - Hydraulic
- Complete with Steady, Covers, Quills etc.
- Machine is with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Make - Nova (Italy)
Model - 50/400
Swing over Table - 825 mm
Max. Swing over Wheel-Head Slide - 700 mm
Max. Grinding Length of Job - 500 mm
Max. Ground-able Internal Diameter - 700 mm
Work-Head Speeds - 70 rpm to 720 rpm
Work-Head Rotating Angle - 0° to 30°
Internal Grinding Spindle Diameter - 115 mm
Face Grinding Cup Wheel Diameter - 200 mm
- Equipped with Face Grinding Attachment.
- Equipped with Hydraulic Wheel Dresser & angular wheel dresser.
- Complete with coolant filtration unit & pump etc.
- Operating Manual, Electrical Drawings etc. available.
- Machine is in excellent working condition.

Product Details:

Make - Spandau (Germany)
Model - SJ11
Center Height - 240 mm
Max. Diameter of Job - 480 mm
Max. Ground-able Internal Diameter - 225 mm
Table Longitudinal Travel - 500 mm
Max. Diameter of Job (inside protection cover) - 350 mm
- Equipped with Tangential type Face Grinding attachment.
- Auto-cycle Operation including automatic speed change,
automatic wheel dressing etc.
- Equipped with AC Drive for Work-Head Speed control.
- Hydraulic Wheel Dresser for Internal & Face Grinding Wheels.
- Complete with coolant tank & pump etc.
- Machine is in excellent working condition
.

Product Details:

Make - FMB (Italy)
Model - 200
Max. Diameter of Job - 350 mm
Max. Ground-able Internal Diameter - 200 mm
Table Longitudinal Travel - 500 mm
Face Grinding Wheel Diameter - 100 mm
Internal Grinding Spindle Diameter - 80 mm
Work-Head Speeds - 80 rpm to 800 rpm
Least Count of the Machine - 5 Microns
- Hydraulic Rapid Forward/Backward Movement of Wheel-Head.
- Complete with Internal Grinding Wheel Dresser & Face Grinding Wheel Dresser.
- Micro-feed Movements for Wheel-Head and also for Table Movement.
- Automatic Depth Adjustment "Auto-Cut".
- With "Auto-Slow" feature for automatic slow movement of table.
- Complete with Coolant pump & coolant tank etc. 
- Machine is in excellent working condition.

Product Details:

Fortuna (Germany) make Internal Grinding Machine in excellent working condition.The Maximum Job Diameter is 380 mm and the machine is equipped with a Face Grinding Attachment. The technical details are as follows -


Make - Fortuna (Germany)
Center Height - 190 mm
Max. Table Travel - 350 mm
Max. Swing Diameter of Job - 380 mm
Face Grinding Wheel Diameter - 160 mm
Spindle Diameter - 70 mm
Chuck Diameter - 160 mm
- Equipped with Face Grinding Attachment.
- Continuously Variable Work-Head Speed.
- Equipped with a Wheel Dresser.
- Complete with Coolant Tank & Pump.
- Electrical Drawings are available.
- Machine is in very good working condition.