Surface Grinding Machine

Product Details:

Socomo (France) make Hydraulic Surface Grinding Machine in excellent working condition. The Grinding Capacity of the machine is 200 mm x 500 mm. It's a High Precision Machine having a Least Count of 1 Micron (0.001 mm). The technical details are as follows -

Make - Socomo (France)
Model - Series 1774
Capacity - 200 mm x 500 mm
Longitudinal Travel of Table - 540 mm
Cross Travel of Table - 220 mm
Grinding Wheel Diameter - 250 mm
Grinding Wheel Width - 19 mm
Maximum Height from Magnet Top to Wheel Center - 430 mm
Least Count - 1 Micron (0.001 mm)
- Motorised Rapid Vertical Travel of the Wheel-Head.
- Automatic Feed & Continuous Cross Travels.
- Machine is in excellent working condition.

Product Details:

Stefor (Italy) make Automatic Surface Grinding Machine in excellent working condition. The model of the machine is RTE 6/4 and the Grinding Capacity is 300 mm x 600 mm. The machine has a new electrical panel and is equipped with a PLC. The technical details are as follows -

Make - Stefor (Italy)
Model - RTE 6/4
Grinding Capacity - 300 mm x 600 mm
Longitudinal Travel of Table - 700 mm
Cross Travel of Table - 400 mm
Grinding Wheel Size - Diameter 350 mm x 50 mm Width
Height between Table Top to Wheel Center - 600 mm
- New Electrical Panel with PLC.
- Equipped with a Hydraulic Top Mounted Wheel Dresser.
- Electrical Drawings, Hydraulic Drawings, Operating Manual available.
- Machine is in excellent working condition.

Product Details:

H. Ernault Somua (France) make Hydraulic Surface Grinding Machine in excellent working condition. The model of the machine is MH 650 and the Grinding Capacity is 220 mm x 650 mm. The Least Count of the Machine is 2 Microns (0.002 mm). The technical details are as follows -

Make - H. Ernault Somua (France)
Model - MH 650
Magnet Size - 220 mm x 650 mm
Grinding Wheel Size - Diameter 225 mm x 32 mm Width
Max. Height between Magnet Top to Wheel Center - 300 mm
Least Count of the Machine - 2 Microns (0.002 mm)
Longitudinal Travel of the Table - 690 mm
Cross Travel of the Wheel-Head - 250 mm
- With Motorised Rapid Vertical Travels.
- Equipped with a Wheel Dresser.
- Complete with Coolant Tank and Pump.
- Operating Manual of the Machine is available.
- Machine is in excellent working condition.

Product Details:

ELB (Germany) make Precision Surface Grinding Machine in excellent working condition. The model of the machine is SW4HA and the Grinding Capacity is 200 mm x 450 mm. It is an extra Height machine having a maximum height between Table and Wheel Center of 550 mm. The machine is complete with Coolant Tank and Pump. The technical details are as follows -

Make - ELB (Germany)
Model - SW4HA
Capacity - 200 mm x 450 mm
Grinding Wheel Diameter - 250 mm
Grinding Wheel Width - 25 mm
Longitudinal Travel - 500 mm
Cross Travel - 250 mm
Max. Height between Table to Wheel Center - 550 mm
Current Magnet Size - 160 mm x 400 mm
- Micro-Feed Travels in both Vertical & Cross Travels.
- It is a Column Moving type Design of Surface Grinder.
- Complete with Coolant Tank and Pump.
- Machine is in excellent working condition.

Product Details:

Delta (Italy) make Rotary Surface Grinding Machine in excellent working condition. It is a Vertical Spindle type Rotary Grinder having a Magnetic Table Diameter of 400 mm. It has a Cup Wheel type Wheel-Head and it is a Swivel Arm type Grinding Machine. The technical details are as follows -

Make - Delta (Italy)
Model - LC-400
Magnetic Table Diameter - 400 mm
Cup Wheel Diameter - 200 mm
Max. Job Height - 250 mm
Max. Swing Diameter (without Cover) - 500 mm
Spindle Motor - 4 HP
Wheel Type - Cup Wheel
- Feature of Automatic Depth Adjustment "Auto-Cut".
- Micro-Feed Travels in Vertical Travels.
- Equipped with a Wheel Dresser, Coolant Tank and Pump.
- A spare Wheel Flange is also available.
- Machine is in excellent working condition.

Product Details:

High Precision Surface Grinding Machine made by Jones & Shipman (England) in excellent working condition. It is a Hydraulic type Surface Grinder having a Grinding Capacity of 150 mm x 450 mm. The machine is equipped with a special Wheel Dresser capable of Flat, Angular and Profile Wheel Dressing. The machine is also complete with its Dust Collection Unit. The technical details are as follows -

Make - Jones & Shipman (England)
Model - 540
Magnet Size - 152 mm x 458 mm
Longitudinal Travel - 480 mm
Cross Travel - 170 mm
Grinding Wheel Diameter - 178 mm
Least Count of Vertical Travel - 2 Microns (0.002 mm)
- Micro Feed Adjustments in both Vertical & Cross Travel.
- Graduations are in both - Metric (mm) and Imperial (inch).
- Equipped with a Wheel-Top mounted special Dressing Unit.
- Complete with a Dust Collector.
- Machine is in excellent working condition.

Product Details:

Vertical Surface Grinding Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is BPV 300/1.5 and the Magnet Size is 300 mm x 1500 mm. The machine is complete with its Coolant Tank, Pump, Splash Guards, and Wheel Dresser etc. The technical details are as follows -

Make - TOS (Czech Republic)
Model - BPV 300/1.5
Magnet Size - 300 mm x 1500 mm
Segmented Wheel Cup Diameter - 315 mm
No. of Segments - 8 pcs.
Max. Height of Job - 400 mm
- With Automatic Depth Adjustment "Auto-Cut".
- With Wheel Dresser, Splash Guards, Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Vertical Spindle Rotary Table Surface Grinding Machine made by Delta (Italy) in excellent working condition. It has a Cup Wheel type Wheel-Head and it is a Swivel Arm type Grinding Machine. The model of the machine LC-400 and the Magnetic Rotary Table Diameter is 350 mm. The technical details are as follows -

Make - Delta (Italy)
Model - LC-400
Magnetic Table Diameter - 350 mm
Max. Swing Diameter - 400 mm
Cup Wheel Diameter - 175 mm
Max. Job Height - 200 mm
Wheel Type - Cup Wheel
- Micro-Feed Travels in Vertical Travels.
- Complete with Coolant Tank and Pump.
- Machine is in excellent working condition.

Product Details:

MAS (Czech Republic) make Vertical Surface Grinding Machine in excellent working condition. The model of the machine is BPV 300/1.5 and the Magnet Size is 300 mm x 1500 mm. The technical details are as follows -

Make - MAS (Czech Republic)
Model - BPV 300/1.5
Magnet Size - 300 mm x 1500 mm
Segmented Wheel Cup Diameter - 315 mm
No. of Segments - 8 pcs.
Max. Height of Job - 400 mm
- With Automatic Depth Adjustment "Auto-Cut".
- Complete with a Wheel Dresser, Splash Guards etc.
- Complete with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Jones & Shipman (England) make Precision Surface Grinding Machine in excellent working condition. The model of the machine is 540P and the Grinding Capacity is 150 mm x 450 mm. The technical details are as follows -

Make - Jones & Shipman (England)
Model - 540P
Job Grinding Size - 150 mm x 450 mm
Magnet Size - 150 mm x 420 mm
Longitudinal Travel - 480 mm
Cross Travel - 170 mm
Grinding Wheel Size - Diameter 180 mm x 25 mm Width
Distance b/w Magnet Top & Wheel Center - 260 mm
Least Count of Vertical Feed Travel - 1 Micron (0.001 mm)
Least Count of Cross Feed Travel - 2.5 Micron (0.025 mm)
Graduations - Metric (in mm)
- Micro Feed Adjustments in both Vertical Travel & in Cross Travel.
- Complete with Coolant Tank & Pump.
- Rapid Motorised Vertical Travel of Wheel-Head.
- Machine is in excellent working condition.

Product Details:

Milano (Italy) make Hydraulic Surface Grinder in excellent working condition. The Job  Grinding Capacity of the Machine is 250 mm x 700 mm. The technical details are as follows -

Make - Milano (Italy)
Model - A.F. 75.30
Max. Job Size - 250 mm x 700 mm
Longitudinal Travel - 750 mm
Cross Travel - 280 mm
Current Magnet Size - 250 mm x 600 mm
Grinding Wheel Size - Diameter 300 mm x 32 mm Width
- With Motorised Rapid Vertical Travel of the Wheel-Head.
- Continuous & Feed Movements on Cross Travel.
- Complete with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Abwood (England) make Horizontal Rotary Table Surface Grinder in excellent working condition. The model of the machine is RG-1 and the Maximum Swing Diameter is 700 mm. The technical details are as follows -

Make - Abwood (England)
Model - RG-1
Table Diameter - 500 mm
Max. Job Diameter - 700 mm
Grinding Wheel Size - Diameter 350 mm x 50 mm Width
Max. Horizontal Stroke of the Ram - 375 mm
Max. Distance between Table Top & Wheel-Center - 280 mm
Table Tilting - +7 degree to -7 degree
- Wheel Top Mounted Hydraulic Wheel Dresser.
- Features like Auto-Cut, Count Down Counter, Auto-Stop etc.
- Machine is in excellent working condition.

Product Details:

Stefor (Italy) make Surface Grinding Machine in excellent working condition. The model of the machine is RTE 600 and the Magnet Size is 300 mm x 600 mm. It is a High Precision Surface Grinder having a Least Count of 2 Microns (0.002 mm) in Vertical Travel. The Cross Travel as well as Vertical Travel have Micro Feed Adjustments. The technical details are as follows -

Make - Stefor (Italy)
Model - RTE 600
Magnet Size - 300 mm x 600 mm
Cross Travel - 380 mm
Longitudinal Travel - 700 mm
Distance between Magnet to Wheel-Center - 520 mm
Grinding Wheel Size - Diameter 300 mm x 50 mm Width
Least Count of Vertical Travel - 2 Micron (0.002 mm)
Least Count of Cross Travel - 1 Micron (0.001 mm)
- Features like Automatic Depth Adjustment "Auto-Cut" etc.
- Equipped with a Diaform profile Wheel Dresser.
- Complete with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

WMW (Germany) make Vertical Rotary Surface Grinding Machine in excellent working condition. The model of the Machine is BRW-63 and the Table Diameter is 630 mm. The technical details are as follows -

Make - WMW (Germany)
Model - BRW-63
Magnetic Table Diameter - 630 mm
Segmented Cup Wheel Diameter - 400 mm
Wheel Type - Segmented ; 8 pcs.
Max. Height of Job - 350 mm
Magnet Type - Electro-Magnet
- Motorized Rapid Vertical Travel of Wheel-Head.
- Hydraulic Rapid Forward & Backward Movement of Table.
- Machine is in excellent working condition.

Product Details:

Cantaluppi (Italy) make Vertical Surface Grinding Machine in excellent working condition. The model of the machine is MC1100 and the Max. Job Grinding Size is 375 mm x 1200 mm. The technical details are as follows -

Make - Cantaluppi (Italy)
Model - MC1100
Max. Job Size - 375 mm x 1200 mm
Table Size - 260 mm x 1000 mm
Current Magnet Size - 120 mm x 1200 mm
Segmented Cup Wheel Diameter - 205 mm
No. of Segments in Wheel - 6 pcs.
Max. Distance between Table to Wheel - 400 mm
Spindle Motor - 5.2 kW
- Motorised Rapid Vertical Travel of the Wheel-Head.
- Equipped with a Wheel Dresser.
- Machine is in excellent working condition.

Product Details:

Surface Grinding Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is BPH 300 and the Magnet Size is 300 mm x 1000 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - BPH 300
Magnet Size - 300 mm x 1000 mm
Cross & Longitudinal Travels - 335 mm x 1060 mm
Grinding Wheel Size - Diameter 250 mm x 25 mm Width
Max. Distance between Magnet Top & Wheel-Axis - 375 mm
- Complete with Coolant Tank and Pump.
- Operating Manual & Electrical Drawings are available.
- Machine is in excellent working condition.

Product Details:

Blohm (Germany) make Surface Grinding Machine in excellent working condition. The model of the machine is HFS 9 and the Magnet Size is 300 mm x 900 mm. The technical details are as follows -

Make - Blohm (Germany)
Model - HFS 9
Magnet Size - 300 mm x 900 mm
Longitudinal Travel of Table - 970 mm
Cross Travel of Table - 325 mm
Grinding Wheel Diameter - 300 mm
Grinding Wheel Width - 50 mm
Max. Distance between Magnet & Wheel-Center - 510 mm
Grinding Wheel Speeds - 1400 rpm / 2800 rpm
- Fitted with new PLC and Touch Screen (with new electrical panel).
- With Automatic Depth Adjustment "Auto-Cut".
- Motorised Rapid Movements on Cross & Vertical Travel.
- Machine is in excellent working condition.

Product Details:

Thompson-Matrix (USA) make Heavy Duty Surface Grinding Machine in excellent working condition. The Job Grinding Capacity of the Machine is 300 mm x 1050 mm. It is a Heavy Duty Machine with a Grinding Wheel Diameter of 500 mm. The technical details are as follows -

Make - Thompson Matrix (USA)
Grinding Capacity - 300 mm x 1050 mm
Current Magnet Size - 300 mm x 900 mm
Grinding Wheel Diameter - 500 mm
Grinding Wheel Width - 50 mm
Total Clamping Surface - 310 mm x 1400 mm
Longitudinal Travel - 1120 mm
Cross Travel - 310 mm
Max. Distance between Table & Wheel Center - 625 mm
Wheel Spindle Motor - 15 HP
- Features like Automatic Depth Adjustment "Auto-Cut".
- It is a Heavy Duty type Surface Grinding Machine.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Hydraulic Surface Grinding Machine in excellent working condition. The model of the Machine is BPH 20 and the Electro-Magnet Size is 200 mm x 600 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - BPH 20
Magnet Size - 200 mm x 600 mm
Grinding Wheel Diameter - 250 mm
Grinding Wheel Width - 38 mm
Longitudinal Travel - 650 mm
Cross Travel - 230 mm
Max. Distance b/w Magnet Top to Wheel Center - 320 mm
- Motorised Rapid Vertical Travel of the Wheel-Head.
- Features like Auto-Cut, Rapid Movement of Cross Travel etc.
- Machine is in excellent working condition.

Product Details:

Athena (Italy) make Vertical Rotary Surface Grinding Machine in excellent working condition. The Electro-Magnetic Table Diameter is 305 mm and the Maximum Swing Diameter is 430 mm. The technical details are as follows -

Make - Athena (Italy)
Model - TGS/175
Magnetic Table Diameter - 305 mm
Segmented Cup Wheel Diameter - 200 mm
Max. Job Swing Diameter - 430 mm
Wheel Type - Segmented ; 6 pcs.
Max. Height of Job - 160 mm
Magnet Type - Electro-Magnet
No. of Table Speeds - 4 Different Speeds
- Complete with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Jakobsen (Denmark) make Surface Grinding Machine in excellent working condition. The Job Grinding Size of the machine is 350 mm x 600 mm and it is equipped with a 2-Axis DRO. The machine has a Least Count of 2 Microns (0.002 mm) and it also has Micro Feed Adjustments on the Cross Travel. The technical details are as follows -

Make - Jakobsen (Denmark)
Capacity - 350 mm x 600 mm
Longitudinal Travel - 750 mm
Cross Travel - 375 mm
Grinding Wheel Diameter - 300 mm
Grinding Wheel Width - 75 mm
Max. Height between Table to Wheel Center - 500 mm
Current Magnet Size - 250 mm x 600 mm
Least Count - 2 Microns (0.002 mm)
Grinding Wheel Speeds - 1400 rpm / 2800 rpm
- Micro-Feed Travels in Cross Travels (2 Micron Least Count).
- Equipped with 2-Axis DRO.
- Features like Automatic Depth Adjustment "Auto-Cut", Delay etc.
- Complete with Wheel Dresser, Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Jotes (Poland) make Surface Grinding Machine in excellent working condition. The model of the machine is SPD - 30C and the Job Grinding Capacity is 300 mm x 1000 mm. The machine is complete with its Magnet Coolant Filtration Unit, Wheel Dresser, Operating Manual etc. The technical details are as follows -

Make - Jotes (Poland)
Model - SPD - 30C
Magnet Size - 300 mm x 1000 mm
Grinding Wheel Size - Diameter 350 mm x 50 mm Width
Max. Distance between Wheel Center to Table - 575 mm
Max. Cross Travel of Wheel - 370 mm
Least Count of Vertical Travel - 2 Microns (0.002 mm)
Weight - 5 tons (Approximately)
- Complete with Magnetic Coolant Filtration Unit, Tank & Pump.
- Equipped with a Wheel-Top Mounted Wheel Dresser.
- Complete with its Operating Manual.
- Machine is in excellent working condition.

Product Details:

Jones & Shipman (England) make Precision Universal Cylindrical Grinding Machine in excellent working condition. The model of the machine is 1302 EIT and it has a Double Swivel type Wheel-Head. The Grinding Capacity is 355 mm Diameter and 686 mm Length of Job. The technical details are as follows -

Make - Jones & Shipman (England)
Model - 1302 EIT
Center Height - 178 mm
Max. Job Diameter - 355 mm
Max. Length of Job - 686 mm
Grinding Wheel Size - Diameter 305 mm x 31.75 mm Width
Work-Head Speeds - 25 rpm to 300 rpm
Table Rotation - 18 Degree to -16 Degree
- Equipped with Internal Grinding Attachment.
- Features like Auto-Cut and Plunge Grinding.
- Micro-Feed Adjustments on both Table & Wheel-Head Travel.
- Complete with Coolant Tank & Pump.
- Double Swivel type Wheel Head.
- Machine is in excellent working condition.

Product Details:

Jones & Shipman (England) make High Precision Surface Grinding Machine in excellent working condition. The model of the machine is 540P and the Grinding Capacity is 150 mm x 450 mm. It is a Hydraulic Machine having Rapid Motorised Vertical Travels. The technical details are as follows -

Make - Jones & Shipman (England)
Model - 540P
Grinding Capacity - 150 mm x 450 mm
Longitudinal Travel - 480 mm
Cross Travel - 170 mm
Grinding Wheel Diameter - 178 mm
Current Magnet Size - 125 mm x 255 mm
- Micro Feed Adjustments in both Vertical & Cross Travel.
- Rapid Motorised Vertical Travel of Wheel-Head.
- Machine is in excellent working condition.

Product Details:

Vertical Surface Grinder Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is BPV 300/1000 and the Magnet Size is 300 mm x 1000 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - BPV 300/1000
Magnet Size - 300 mm x 1000 mm
Segmented Wheel Cup Diameter - 315 mm
No. of Segments in Wheel - 8 pcs.
Max. Height of Job - 400 mm
Spindle Motor - 15 kW
- With Automatic Depth Adjustment "Auto-Cut".
- Complete with Coolant tank and pump.
- Machine is in excellent working condition.

Product Details:

Hydraulic Surface Grinding Machine made by Jung (Germany) in excellent working condition. The model of the machine is HF 50N and the Grinding Capacity is 550 mm x 200 mm. The technical details are as follows -

Make - Jung (Germany)
Model - HF 50N
Magnet Size - 550 mm x 200 mm
Longitudinal Travel - 625 mm
Cross Travel - 230 mm
Grinding Wheel Size - Diameter 225 mm x 31.75 mm Width
Max. Distance between Magnet to Wheel-Center - 290 mm
Least Count of Vertical Feed Travel - 2 Microns
- Motorised Rapid Vertical Travel of Wheel-Head.
- With Automatic Depth Adjustment "Auto-Cut".
- Equipped with a Top Mounted Wheel Dresser.
- Machine is in excellent working condition.

Product Details:

Freeport (Taiwan) make Manual Surface Grinding Machine in excellent working condition. The Job Grinding Capacity of the machine is 400 mm x 200 mm. It is a High Precision type machine having a Least Count of 2 Micron (0.002 mm) on the Vertical Travel. The technical details are as follows -

Make - Freeport (Taiwan)
Model - SGS-816
Capacity - 400 mm x 200 mm
Longitudinal Travel - 425 mm
Cross Travel - 200 mm
Current Magnet Size - 360 mm x 200 mm
Grinding Wheel Size - Diameter 230 mm x 25 mm Width
Max. Height between Magnet Top to Wheel Center - 410 mm
Least Count - 2 Micron (0.002 mm)
Grinding Wheel Speed - 2900 rpm
- Machine is in excellent working condition.

Product Details:

Eyushiuak (Taiwan) make Fully Automatic Precision Surface Grinding Machine in excellent working condition. The model of the machine is MPS-350AHD and the Magnet Size is 355 mm x 710 mm. It is a an Auto-Cycle machine having a Minimum Feed of 1 Micron (0.001 mm) in the Vertical Travel. The technical details are as follows -

Make - Eyushiuak (Taiwan)
Model - MPS-350AHD
Magnet Size - 355 mm x 710 mm
Longitudinal Travel - 760 mm
Cross Travel - 390 mm
Grinding Wheel Diameter - 300 mm
Grinding Wheel Width - 38 mm
Minimum Feed Travel in Vertical Axis - 1 Micron (0.001 mm)
Max. Height between Magnet to Wheel Center - 435 mm
Resolution of the Vertical Axis DRO - 2 Microns (0.002 mm)
- Programmable Machine with complete Auto-Cycle Working.
- Features like Rough Cut, Finish Cut, & Spark-Out.
- Features like Automatic Wheel Retraction, Plunge Grinding etc.
- Electro-Magnet with feature of De-Magnetisation, Variable Strength, & Timer.
- Equipped with Wheel Top Mounted Wheel Dresser.
- Complete with Magnetic Coolant Filtration Unit, Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Heavy Duty Vertical Spindle Surface Grinding Machine made by MAS (Czech Republic) in excellent working condition. The model of the machine is BPV 300 and the Magnet Size is 300 mm x 1000 mm. It is one of the latest models of the Vertical Surface Grinders made by the MAS company. The technical details are as follows -

Make - MAS (Czech Republic)
Model - BPV 300
Magnet Size - 300 mm x 1000 mm
Segmented Wheel Cup Diameter - 325 mm
No. of Segments - 8 pcs.
Max. Height of Job - 430 mm
Spindle Motor - 22 kW
- Features like Automatic Depth Adjustment "Auto-Cut".
- Equipped with a Wheel Dresser.
- Spare Cup type Grinding Wheel Flange and a spare Cup type Wheel.
- Machine is currently equipped with segmented wheels.
- Complete with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

High Precision Hydraulic Surface Grinding Machine made by Jones & Shipman (England) in excellent working condition. The model of the machine is 540 and the Grinding Capacity is 150 mm x 450 mm. It is a High Precision Machine having Least Count of 1 Micron (0.001 mm). The technical details are as follows -

Make - Jones & Shipman (England)
Model - 540
Grinding Capacity - 150 mm x 450 mm
Longitudinal Travel - 480 mm
Cross Travel - 170 mm
Grinding Wheel Diameter - 178 mm
Current Magnet Size - 160 mm x 250 mm
Least Count - 1 Micron (0.001 mm)
Graduations - Metric (mm)
- Automatic Depth Adjustment "Auto-Cut" (Vertical Axis Automatic Feed Travel).
- Currently equipped with a Magnetic Sine Table.
- Micro Feed Adjustments in both Vertical & Cross Travel.
- Machine is in excellent working condition.

Product Details:

Surface Grinding Machine make by Zocca (Italy) in excellent working condition. The model of the machine is RPAT 650 and the Job Grinding Capacity is 300 mm x 650 mm. The machine is equipped with two different interchangeable grinding heads. First one is for normal flat grinding purposes and another is a special head equipped with two different types of wheel dresser and is suitable for profile grinding applications. The technical details are as follows -

Make - Zocca (Italy)
Model - RPAT 650
Magnet Size - 300 mm x 630 mm
Grinding Wheel Diameter - 300 mm
Grinding Wheel Width - 40 mm
Job Grinding Capacity - 300 mm x 650 mm
Max. Distance between Magnet Top to Spindle Center - 445 mm
- Feature of Automatic Depth Adjustment "Auto-Cut".
- Equipped with a Top Mounted Wheel Dresser on the main Spindle.
- Equipped with a 2nd Grinding Head for special grinding and profile grinding applications.
- 2nd Grinding Head is equipped with Two different types of Wheel Dressers.
- Machine is in excellent working condition.

Product Details:

Billeter (Germany) make Vertical Spindle Rotary Surface Grinder Machine in excellent working condition. The Magnetic Table Diameter is 600 mm and the Maximum Swing Diameter is 800 mm. The Diameter of the Segmented type Grinding Cup Wheel is 475 mm. The technical details are as follows -

Make - Billeter (Germany)
Table Diameter - 600 mm
Segmented Cup Wheel Diameter - 475 mm
Maximum Diameter of the Job - 800 mm
Wheel Type - Segmented ; 12 pcs.
Max. Height of the Job - 375 mm
Magnetic Table Rotation Speeds - 2 rpm to 30 rpm
Magnet Type - Electro-Magnet
Spindle Motor Power - 14 kW
- Motorised Rapid Forward and Backward Travel of Table.
- With Automatic Depth Adjustment "Auto-Cut" feature.
- Complete with Coolant Tank and Pump.
- Electrical Drawings of the machine are available.
- Machine is in excellent working condition.

Product Details:

Jones & Shipman (England) make Precision Surface Grinding Machine in excellent working condition. The model of the machine is 1400 and the Grinding Capacity is 204 mm x 610 mm. The technical details are as follows -

Make - Jones & Shipman (England)
Model - 1400
Grinding Capacity - 204 mm x 610 mm
Longitudinal Travel of Table - 635 mm
Grinding Wheel Size - Diameter 204 mm X 20 mm Width
Current Magnet Size - 150 mm x 450 mm
Vertical Travel of Wheel-Head - 280 mm
Least Count of Vertical Travel - 1 Micron (0.001 mm)
Least Count of Cross Travel - 2.5 Microns (0.0025 mm)
Graduations on Dials - Metric (in mm)
- With Motorized Vertical Travel of the Wheel-Head.
- Complete with Diaform make Profile Wheel Dressing Attachment.
- Machine is in excellent working condition.

Product Details:

Surface Grinding Machine made by Rosa (Italy) in excellent working condition. The Model of the Machine is RTRC 1100 and the Job Grinding Capacity is 450 mm x 1100 mm. The technical details are as follows -

Make - Ermando Rosa (Italy)
Model - RTRC 1100
Job Grinding Size - 450 mm x 1100 mm
Max. Cross Travel - 500 mm
Max. Longitudinal Travel - 1200 mm
Current Magnet Size - 400 mm x 1000 mm
Grinding Wheel Size - Diameter 350 mm x 50 mm Width
Max. Distance b/w Magnet to Wheel Center - 525 mm
- Equipped with a Wheel-Top Mounted Wheel Dresser.
- Complete with Operating Manual, Electrical Drawings etc.
- Machine is in excellent working condition.

Product Details:

High Precision Surface Grinding Machine made by Jones & Shipman (England) in excellent working condition. It is a Hydraulic type Surface Grinder having a Grinding Capacity of 150 mm x 450 mm. The machine is equipped with a special Wheel Dresser capable of Flat, Angular and Profile Wheel Dressing. The machine is also complete with its Dust Collection Unit. The technical details are as follows -

Make - Jones & Shipman (England)
Model - 540
Grinding Capacity - 150 mm x 450 mm
Longitudinal Travel - 480 mm
Cross Travel - 170 mm
Grinding Wheel Diameter - 178 mm
Current Magnet Size - 150 mm x 355
Least Count of Vertical Travel - 2 Microns (0.002 mm)
- Micro Feed Adjustments in both Vertical & Cross Travel.
- Graduations are in Metric (mm).
- Equipped with a Wheel-Top mounted special Dressing Unit.
- Complete with a Dust Collector.
- Machine is in excellent working condition.

Product Details:

Surface Grinding Machine made by Alpa (Italy) in excellent working condition. The model of the machine is RT 600 and the Job Grinding Capacity of the machine is 300 mm x 600 mm. The Longitudinal and Cross Travel of the machine is 700 mm and 350 mm respectively. The machine is also mounted with a wheel-top mounted Hydraulic Wheel Dresser. The technical details are as follows -

Make - Alpa (Italy)
Model - RT 600
Grinding Capacity - 300 mm x 600 mm
Longitudinal Travel of Table - 700 mm
Cross Travel of Table - 350 mm
Grinding Wheel Size - Diameter 400 mm X 50 mm Width
Current Electro-Magnet Size - 200 mm x 600 mm
Max. Distance between Table Top to Wheel Center - 500 mm
- Features like Automatic Depth Adjustment "Auto-Cut".
- Equipped with Wheel-top mounted Hydraulic Wheel Dresser.
- Complete with Coolant Tank, Pump and spare Wheel Flange.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Vertical Surface Grinding Machine in excellent working condition. The model of the machine is BPV 300 and the Magnet Size is 300 mm x 1500 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - BPV 300
Magnet Size - 300 mm x 1500 mm
Segmented Wheel Cup Diameter - 315 mm
No. of Segments in Wheel - 8 pcs.
Max. Height of Job - 400 mm
- With Automatic Depth Adjustment "Auto-Cut".
- Complete with Coolant tank and pump.
- Machine is in excellent working condition.

Product Details:

Vertical Spindle Surface Grinding Machine made by MAS (Czech Republic) in excellent working condition. The model of the machine is BPV 300/1 and the Magnet Size is 300 mm x 1000 mm. The technical details are as follows -

Make - MAS (Czech Republic)
Model - BPV 300/1
Magnet Size - 300 mm x 1000 mm
Segmented Wheel Cup Diameter - 315 mm
No. of Segments - 8 pcs.
Max. Height of Job - 400 mm
- With Automatic Depth Adjustment "Auto-Cut".
- Complete with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Jakobsen (Denmark) make High Precision Surface Grinding Machine in excellent working condition. The Grinding Capacity of the Machine is 200 mm x 450 mm and it is equipped with a 2-Axis DRO. The machine has Micro-Feed Travels on both - Vertical and Cross Travel - and has a Least Count of 1 Micron (0.001 mm). The technical details are as follows -

Make - Jakobsen (Denmark)
Capacity - 200 mm x 450 mm
Grinding Wheel Diameter - 200 mm
Grinding Wheel Width - 38 mm
Longitudinal Travel - 550 mm
Cross Travel - 205 mm
Max. Height between Magnet to Wheel Center - 340 mm
Current Magnet Size - 200 mm x 400 mm
Least Count - 1 Micron (0.001 mm)
- Micro-Feed Travels in both Cross Travel & Vertical Travel.
- Equipped with 2-Axis DRO.
- Machine is in excellent working condition.