Horizontal Boring Machine

Product Details:

TOS (Czech Republic) make Horizontal Boring Machine in excellent working condition. The model of the machine is WH 80 and the machine is complete with its Facing Chuck, Tailstock, Angle Plates and Boring Bar. The machine is also equipped with a 3-Axis DRO. The technical details are as follows -

Make - TOS (Czech Republic)
Model - WH 80
Spindle Diameter - 80 mm
Table Size - 1090 mm x 1000 mm
Cross Travel - 1250 mm
Vertical Travel - 900 mm
Longitudinal Travel - 1250 mm
Spindle Travel - 710 mm
Facing Chuck Diameter - 530 mm
Spindle Taper - MT 5
Spindle Speeds - 14 rpm to 1400 rpm
Table Load Capacity - 2,800 kg
Weight of the Machine - 11.5 Tons Approximately.
- Complete with Facing Chuck, Tailstock and a Boring Bar.
- Complete with 2 pcs. x Angle Plates (Size 550 mm x 900 mm).
- Electrical Drawings of the machine are available.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Horizontal Boring Machine in excellent working condition. The model of the machine is H63A and the Table Size is 800 mm x 880 mm. The machine is complete with its Facing Chuck. The technical details are as follows -

Make - TOS (Czech Republic)
Model - H63A
Spindle Diameter - 63 mm
Table Size - 800 mm x 880 mm
Cross Travel - 800 mm
Vertical Travel - 710 mm
Longitudinal Travel - 1100 mm
Spindle Travel - 560 mm
Facing Chuck Diameter - 410 mm
Spindle Taper - MT 4
Spindle Speeds - 11.2 rpm to 1400 rpm
- Complete with Facing Chuck.
- Machine is in excellent working condition.

Product Details:

Horizontal Boring Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is W100A and the Table Size is 1250 mm x 1250 mm. The machine is complete with its Facing Chuck and Tailstock. The technical details are as follows -

Make - TOS (Czech Republic)
Model - W100A
Spindle Diameter - 100 mm
Table Size - 1250 mm x 1250 mm
Cross Travel - 1600 mm
Vertical Travel - 1120 mm
Longitudinal Travel - 1250 mm (with Tailstock equipped)
Spindle Travel - 900 mm
Facing Chuck Diameter - 600 mm
Spindle Taper - MT 6
Spindle Speeds - 7 rpm to 1120 rpm
- Complete with Facing Chuck & Tailstock.
- Operating Manual & Electrical Drawings are available.
- Machine is in excellent working condition.

Product Details:

Stanko (Russia) make Horizontal Boring Machine in excellent working condition. The model of the machine is 2A614 and the Spindle Diameter is 80 mm. The machine is complete with  its Facing Chuck, Tail-Stock and is also equipped with a DRO. The technical details are as follows -

Make - Stanko-Import (Russia)
Model - 2A614
Spindle Diameter - 80 mm
Table Size - 1000 mm x 800 mm
Cross Travel - 800 mm
Vertical Travel - 800 mm
Longitudinal Travel - 1000 mm
Spindle Travel - 425 mm
Facing Chuck Diameter - 500 mm
Spindle Taper - MT 5
Spindle Speeds - 20 rpm to 1600 rpm
- Complete with Facing Chuck & Tail-Stock.
- Equipped with DRO.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) WH 63 Horizontal Boring Machine in excellent working condition. The machine is complete with its Facing Chuck and Tail-Stock. It is also equipped with a Jib Crane  and a 3-Axis DRO. The technical details are as follows -

Make - TOS (Czech Republic)
Model - WH 63
Spindle Diameter - 63 mm
Table Size - 890 mm x 800 mm
Cross Travel - 1000 mm
Vertical Travel - 710 mm
Longitudinal Travel - 1000 mm
Spindle Travel - 560 mm
Facing Chuck Diameter - 450 mm
Spindle Taper - MT 4
Spindle Speeds - 18 rpm to 1800 rpm
Max. Job Weight - 2000 kgs.
- Complete with Facing Chuck & Tail-Stock.
- Equipped with a 3-Axis DRO.
- Equipped with a Jib Crane.
- Operating Manual & Electrical Drawings are available.
- Machine is in excellent working condition.

Product Details:

WMW-Union (Germany) make Horizontal Boring Machine in excellent working condition. The model of the machine is BFT 90/3 and the Spindle Diameter is 90 mm. The machine is complete with Facing Chuck, Tail-Stock, Milling Head and is equipped with a 3-Axis DRO. The technical details are as follows -

Make - WMW-Union (Germany)
Model - BFT 90/3
Spindle Diameter - 90 mm
Table Size - 1000 mm x 1120 mm
Cross Travel (X Axis) - 1000 mm
Vertical Travel (Y Axis) - 1000 mm
Longitudinal Travel (Z Axis) - 1600 mm
Spindle Travel (W Axis) - 710 mm
Table Rotation (U Axis) - 360 Degrees (Continuous)
Spindle Taper - MT 5
Spindle Speeds - 8 rpm to 1600 rpm
- Complete with Facing Chuck, Tail-Stock, & Milling Head.
- Equipped with Ball-Screws on all the 3-Axis.
- Equipped with 3-Axis DRO.
- Complete with Operating Manuals, Electrical Drawings etc.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) WH 63 Horizontal Boring Machine in excellent working condition. The Spindle Diameter is 63 mm and the Table Size is 890 mm x 800 mm.The technical details are as follows -

Make - TOS (Czech Republic)
Model - WH 63
Spindle Diameter - 63 mm
Table Size - 890 mm x 800 mm
Cross Travel - 1000 mm
Vertical Travel - 710 mm
Longitudinal Travel - 1000 mm
Spindle Travel - 560 mm
Facing Chuck Diameter - 450 mm
Spindle Taper - MT 4
Spindle Speeds - 18 rpm to 1800 rpm
Max. Job Weight - 2000 kg
- Complete with Facing Chuck & Tail-Stock.
- Equipped with a 4-Axis DRO.
- Operating Manual & Electrical Drawings are available.  
- Machine is in excellent working condition.

Product Details:

Make - WMW-Union (Germany)
Model - BFT-100/IV
Spindle Diameter - 100 mm
Table Size - 1320 mm x 1500 mm
Cross Travel of Table (X Travel) - 1600 mm
Vertical Travel of Head (Y Travel) - 1250 mm
Spindle Travel - 1000 mm
Weight - 18 Tons (approx)
- Complete with facing chuck, tailstock, Angle plates, etc.
- Slides are completely scratch-less; machine in very good condition. 
- Machine will reach our warehouse in 1st week of October.

Product Details:

TOS (Czech Republic) make Horizontal Boring Machine in excellent working condition.The model of the machine is W100A and the Spindle Diameter is 100 mm.The technical details are as follows -


Make - TOS (Czech Republic)
Model - W100A
Spindle Diameter - 100 mm
Table Size - 1250 mm x 1250 mm
Cross Travel - 1600 mm
Vertical Travel - 1120 mm
Longitudinal Travel - 1250 mm (with Tail-Stock equipped)
Spindle Travel - 900 mm
Facing Chuck Diameter - 600 mm
Spindle Taper - MT 6
Spindle Speeds - 7 rpm to 1120 rpm
- Complete with Facing Chuck & Tailstock.
- Equipped with 3-Axis DRO.
- With Angle Plate, Tools and other accessories etc.
- Machine is in excellent working condition.

Product Details:

Make - WMW-Union (Germany)
Model - BFT 80
Spindle Diameter - 80 mm
Table Size - 1125 mm x 900 mm
Cross Travel - 1100 mm
Vertical Travel - 900 mm
Longitudinal Travel - 1600 mm
Spindle Travel - 710 mm
Facing Chuck Diameter - 500 mm
Spindle Taper - MT 5
Spindle Speeds - 2.8 rpm to 1000 rpm
- Equipped with 3-Axis DRO with Touch Sensor.
- Equipped with TOS make Jib Crane (Capacity of 200 kg).
- Machine is in excellent working condition.

Product Details:

Make - Pama (Italy)
Model - AL 100
Spindle Diameter - 100 mm
Cross Travel - 2100 mm
Table Size - 1530 mm x 1270 mm
Table Load Capacity - 8 Tons
Weight of the Machine - 21 Tons (Approx.)
- Complete with Facing Chuck
- With 2 pcs. x Milling Heads.
- Machine is Excellent Working condition.

Product Details:

Make - TOS (Czech Republic)
Model - W100
Spindle Diameter - 100 mm
Table Size - 1250 mm x 1250 mm
Cross Travel - 1600 mm
Vertical Travel - 1120 mm
Spindle Travel - 900 mm
- Complete with Facing Chuck & Tail-stock.
- Complete with Milling Head.
- Equipped with DRO.
- Machine is in excellent working condition.

Product Details:

Ceruti (Italy) make Horizontal Boring Machine in excellent working condition. The model of the machine is AC 85 and the Table Size is 1300 mm x 1100 mm. The machine is complete with its Facing Chuck, Milling Head, and a lot of other accessories. The technical details are as follows -

Make - Ceruti (Italy)
Model - AC 85
Spindle Diameter - 85 mm
Table Size - 1300 mm x 1100 mm
Cross Travel - 1500 mm
Vertical Travel - 1200 mm
Longitudinal Travel - 1500 mm
Spindle Travel - 700 mm
Facing Chuck Diameter - 500 mm
Max. Job Weight - 5.0 Tons
Spindle Taper - MT 5
Spindle Speeds - 15 rpm to 1500 rpm
- Complete with Facing Chuck, Universal Milling Head, Angle Plate etc.
- Lots of other accessories like Spindle Support, Toolings, etc.
- Equipped with a 3-Axis DRO.
- Operating Manual and Electrical Drawings are available.
- Machine is in excellent working condition.