Workshop Equipment

Product Details:

Horizontal Broaching Machine made by Magnaghi (Italy) in excellent working condition. The Tonnage Capacity of the machine is 8 Tons and Max. Stroke Length is 1200 mm. It is a Pull-type Hydraulic Broaching Machine. The machine is complete with lots of spare broaches, fixtures and many other accessories. The technical details are as follows -

Make - Magnaghi (Italy)
Tonnage Capacity - 8 Tons
Stroke Length - 1200 mm
Type - Pull Type ; Hydraulic
- Total of 167 pcs (125 kg) of different types of Broaches available as spare.
- With lots of accessories like Fixtures, Arbours etc.
- Complete with Coolant Tank and Pump.
- Machine is in excellent working condition.

Product Details:

Horizontal Shaping Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is HM-45 and the Maximum Stroke Length is 450 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - HM-45
Max. Stroke Length - 450 mm
Table Size - 440 mm x 310 mm
Stroke Rate - 16 strokes/min to 80 strokes/min
- With Automatic Feed on Cross Travel of Table.
- With Automatic Downward Feed Travel on the Tool-Post.
- Machine is in excellent working condition.

Product Details:

Herbert (England) make Automatic Tapping Machine in excellent working condition. The model of the machine is No. 2. It is a Gear Operated Pitch Controlled Flash Tapping Machine. The technical details are as follows -

Make - Herbert (England)
Model - No. 2
Capacity - 13 mm
Table Size - 390 mm x 325 mm
Spindle Diameter - 60 mm
Max. Spindle Travel - 54 mm
Spindle Speeds - 138 rpm to 2850 rpm
Spindle Motor - 0.75 HP
- Complete with Coolant Tank & Pump.
- Complete with Change Gears & many other accessories.
- Machine is in excellent working condition.

Product Details:

Heavy Duty Horizontal Shaper Machine made by Atlas (Germany) in excellent working condition. The Maximum Stroke Length is 500 mm and it is equipped with a Tilting type Table making it very suitable for Taper Machining Operations. The machine has Automatic Feed Travels on the Tool Travels as well. The technical details are as follows -

Make - Atlas (Germany)
Max. Stroke Length - 500 mm
Stroke Rate - 16 strokes/min to 182 strokes/min
Feed Travel Rate - 0 mm/stroke to 4 mm/stroke
Table Size - 435 mm x 355 mm
Tilting Table Size - 410 mm x 340 mm
- Automatic Feed Travels of the Tool Post.
- Automatic Feed Travels on the Cross & Vertical Table Movement.
- Tilting type Table for Taper Machining Operations.
- Machine is in excellent working condition.

Product Details:

Heavy Duty Horizontal Shaper Machine made by Stanko (Russia) in excellent working condition. The model of the machine is 7A36 and the Maximum Stroke Length is 750 mm. It is a Hydraulic type machine having Motorized Rapid Travels and Feed Travels on the Table. The technical details are as follows -

Make - Stanko (Russia)
Model - 7A36
Max. Stroke Length - 750 mm
Table Size - 710 mm x 450 mm
Feed Travel Rate - 0 mm/stroke to 5 mm/stroke
Cross Travel of Table - 750 mm
Max. Height between Table to Tool - 425 mm
- Motorized Rapid Travels on the Cross & Vertical Travel of Table.
- Automatic Feed Travel of the Tool Post Slide.
- Continuously Variable Feed Rates of Table Travel.
- Machine is in excellent working condition.

Product Details:

Heavy Duty Horizontal Shaper Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is HO-63 and the Maximum Stroke Length is 630 mm. The machine is complete with its Clamping Vice. The technical details are as follows -

Make - TOS (Czech Republic)
Model - HO-63
Max. Stroke Length - 630 mm
Table Size - 630 mm x 400 mm
Stroke Rate - 11 strokes/min to 125 strokes/min
Feed Travel Rate - 0 mm/stroke to 4 mm/stroke
- Automatic Downward Feed Travel of the Tool Post.
- Motorised Rapid Travels on Cross & Vertical Movement of Table.
- Complete with Clamping Vice.
- Machine is in excellent working condition.

Product Details:

SIP (Switzerland) make Rotary Table in excellent working condition. The manufacturer of this Rotary Table is Société Genevoise d'Instruments de Physique (commonly known as SIP or Societe Genevoise). The model of the Table is PD-6 and the Table Diameter is 800 mm. The Table also has Vernier Graduation with readings down to 1 second of Arc. The technical details are as follows -

Make - SIP (Switzerland)
Model - PD-6
Table Diameter - 800 mm
Height of Table - 200 mm
No. of T Channels - 12 Slots
One Rotation of Handle - 1 degree Rotation of Table
- Vernier Graduation (Readings of 1 Second)
- Table is in excellent condition.

Product Details:

Stanko (Russia) make Rotary Table in excellent working condition. The Table Diameter is 690 mm and it has Total of 12 T-Slots. The technical details are as follows -

Make - Stanko (Russia)
Table Diameter - 690 mm
Height of Table - 120 mm
Table Bore Diameter - 100 mm
No. of T Channels - 12 Slots
- Table is in very good condition.

Product Details:

Heavy Duty Horizontal Shaper Machine made by Edgwick (England) in excellent working condition. The Maximum Stroke Length is 500 mm the Different Stroke Rates are from 10 strokes/min to 80 strokes/min. The machine has Automatic Feed Travels on the Tool Travels as well. The technical details are as follows -

Make - Edgwick (England)
Max. Stroke Length - 500 mm
Stroke Rate - 10 strokes/min to 80 strokes/min
Table Size - 500 mm x 315 mm
- Automatic Vertical Feed Travels of the Tool Post.
- Automatic Feed Travels on the Cross Travel of Table.
- Complete with Rotating type Vice & many other accessories.
- Machine is in excellent working condition.

Product Details:

Herbert (England) make Hydraulic Thread Rolling Machine in excellent working condition. The model of the machine is No.1 and the Maximum Rolling Force of the machine is 10 Tons. The technical details are as follows -

Make - Herbert (England)
Model - No. 1
Max. Rolling Force - 10 Tons
Job Diameter Range - 3 mm to 25 mm
Max. Thread Roll Size - Diameter 134 mm x 57 mm Width
Max. Thread Length (in Plunge Method) - 57 mm
Spindle Diameter (ID of Thread Roll) - 69.85 mm
- Complete with many spare sets of Thread Rolls.
- Machine is in excellent working condition.

Product Details:

SIP (Switzerland) make Rotary Table in excellent working condition. The manufacturer of this Rotary Table is Societe Genevoise d'Instruments de Physique (commonly known as SIP or Societe Genevoise). The model of the Table is PD-4 and the Table Diameter is 450 mm. The Table has Vernier Graduation with readings down to 1 second of Arc. The technical details are as follows -
Make - SIP (Switzerland)
Model - PD-4
Table Diameter - 450 mm
Total Height of Table - 170 mm
Number of T Channels - 8 Slots
One Rotation of Handle - 1 degree Rotation of Table
Vernier Graduation for Rotation Angle - 1 Second of Arc
- The table is in excellent condition.

Product Details:

Tilting Type Rotary Table made in Italy in excellent working condition. The Table is suitable for boring Holes and milling of faces at compound angles. The Table has Vernier Graduation with readings down to 1 second of Arc for Rotation Angles and down to 1 minute of Arc for Tilt Angles. The technical details are as follows -

Make - Made in Italy
Table Diameter - 440 mm
Total Height of Table - 335 mm
Number of T Channels - 8 Slots
One Rotation of Handle - 1 degree Rotation of Table
Vernier Graduation for Rotation Angle - 1 Second of Arc
Vernier Graduation for Tilt Angle - 1 Minute of Arc
Weight of Table - 375 kg (Approximately)
- The table is in excellent condition.

Product Details:

Famup (Italy) make Pillar Drilling & Tapping Machine in excellent working condition. The model of the machine is RAG 25 and the Spindle Diameter is 62 mm. It is also possible to do Taper Drilling & Tapping operations in this machine as Table can be Tilted in this machine. The technical details are as follows -

Make - Famup (Italy)
Model - RAG. 25
Drilling Capacity - 25 mm
Spindle Diameter - 62 mm
Spindle Taper - MT 3
Spindle Speeds - 205 rpm to 2100 rpm
Spindle Travel - 120 mm
Clamping Table Size - 250 mm x 250 mm
Max. Height between Top of Base to Spindle - 1190 mm
Vertical Pillar Diameter - 122 mm
Tilting Angle of Table - 0 Degree to 90 degree
Spindle Motor Power - 0.7 HP / 1.3 HP
- Taper Drilling & Tapping is possible as the table can be tilted.
- Equipped with Coolant Pump.
- Machine is in excellent working condition.

Product Details:

Anbas (Italy) make Fully Automatic Bandsaw Machine in excellent working condition. The model of the machine is TR-AU 150 and the Cutting Capacity for Round is 150 mm Diameter. It is a Fully Automatic Bandsaw Machine having Maximum Automatic Feed Length of 5400 mm. The machine is complete with Coolant Tank, Pump and Splash Guards. The technical details are as follows -

Make - Anbas (Italy)
Model - TR-AU 150
Cutting Capacity (for Round) - 150 mm
Max. Travel for Auto-Feed Vice - 600 mm (single time)
Max. No. of Travels for Auto-Feed Vice - 9 Times
Max. Job Length for Auto-Feed - 5400 mm
Type - Fully Automatic ; Hydraulic.
- Can be used for Manual, Semi-Automatic & Full Automatic Mode.
- Complete with Coolant Tank, Pump and Splash Guards.
- Hand-Wheel Control for adjusting Stock Length.
- Machine is in excellent working condition.

Product Details:

Rusch (Germany) make Fully Automatic Bandsaw Machine in excellent working condition. The model of the machine is AS-250 and the Cutting Capacity for Round is 250 mm Diameter. It is a Fully Automatic Bandsaw Machine having Maximum Automatic Feed Length of 1000 mm. The machine is complete with Job Supports as well as many spare cutting blades. The technical details are as follows -

Make - Rusch (Germany)
Model - AS-250
Cutting Capacity (for Round) - 250 mm
Max. Job Length for Auto-Feed - 1000 mm
Type - Fully Automatic ; Hydraulic.
- Hand-Wheel Control for adjusting Stock Length.
- Complete with Job Supports and many spare Blades etc.
- Machine is in excellent working condition.

Product Details:

Delapena (England) make Horizontal Honing Machine in excellent working condition. The model of the machine is Speedhone Model 'S' and the Bore Honing Capacity is from 1.143 mm to 79.0 mm. The technical details are as follows -

Make - Delapena (England)
Model - Speedhone Model 'S'
Bore Honing Capacity - 1.143 mm to 79 mm
Spindle Speeds - 250 rpm to 1000 rpm
- Honing Stone Expansion operated by a graduated control wheel.
- Honing Stone Pressure operated by a graduated control wheel.
- Equipped with Honing Fluid Pump and Tank.
- Machine is in excellent working condition.

Product Details:

Guinot (France) make Vertical Bandsaw Machine in excellent working condition. The model of the machine is S.450 and it is with a Tiltable type Table. The machine is suitable for Sawing & Filing of a variety of materials like Mild Steel, Stainless Steel, Nickel, Aluminium, Fibre, Bakelite, Asbestos, Wood etc. The technical details are as follows -

Make - Guinot (France)
Model - S.450
Table Size - 735 mm x 705 mm
Distance b/w Column & Blade - 430 mm
Max. Cutting Speed - 630 meter/min
Table Tilting along Vertical Axis - +10 degree to -10 degree
Table Tilting along Horizontal Axis - +10 degree to -10 degree
Motor Power - 1.84 kW
- Infinitely Variable Blade Speeds with 2 Speed Gearbox.
- 11 pcs of Spare Blades available.
- Machine is in excellent working condition.

Product Details:

Heavy Duty Horizontal Shaping Machine made by Atlas (Germany) in excellent working condition. The Maximum Stroke Length is 650 mm and it has Rapid & Feed Travels on the Cross & Vertical Travel of the Table. The technical details are as follows -

Make - Atlas (Germany)
Max. Stroke Length - 650 mm
Stroke Rate - 12 strokes/min to 132 strokes/min
Feed Travel Rate - 0 mm/stroke to 4 mm/stroke
Table Size - 560 mm x 440 mm
Tilting Table Size - 540 mm x 380 mm
- Rapid Travels for the Cross & Vertical Travel of Table.
- Automatic Feed Travel of the Tool Post.
- The table can be rotated as well as tilted.
- Machine is in excellent working condition.

Product Details:

Heavy Duty Rotary Table made by Skoda (Czech Republic) in excellent working condition. The model of the Table is E20 and the Clamping Area of Table is 2000 mm x 2000 mm. The Weight carrying capacity is 20 Tons and it has Feed & Rapid Travels on the Table Travel and on the Table Rotation. The technical details are as follows -

Make - Skoda (Czech Republic)
Model - E20
Table Size - 2000 mm x 2000 mm
Loading Capacity - 20 Tons
Table Travel - 1200 mm
Working Height - 900 mm
Width of Bed-Ways - 1430 mm
Table Feed Travel Speeds - 25 mm/min -- 68 mm/min -- 200 mm/min
Table Feed Rotation Speeds - 43.35 mm/min -- 125 mm/min -- 368 mm/min
- Rapid & Feed Movements on Table Travel & Table Rotation.
- It is in excellent working condition.

Product Details:

TOS (Czech Republic) make Horizontal Shaping Machine in excellent working condition. The model of the machine is HM-45 and the Maximum Stroke Length is 450 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - HM-45
Max. Stroke Length - 450 mm
Table Size - 440 mm x 310 mm
Stroke Rate - 16 strokes/min to 80 strokes/min
- With Automatic Feed Cross Travel of Table.
- Machine is in excellent working condition.

Product Details:

Horizontal Broaching Machine made by Coventry Gauge & Tool Co. Ltd (England) in excellent working condition. The machine has been made under License from American Broach & Machine Co (USA). The model of the machine is H-10-48 and the Tonnage Capacity of the machine is 10 Tons and a Stroke Length is 1220 mm (48"). It is a Pull-type Hydraulic Broaching Machine. The machine is complete with lots of spare broaches, fixtures, arbours and many other accessories. The technical details are as follows -

Make - Coventry Gauge & Tool (England)
Model - H-10-48
Tonnage Capacity - 10 Tons
Stroke Length - 1220 mm (48")
Type - Pull Type ; Hydraulic
- made under License of American Broach & Machine Co, USA.
- Total of 119 pcs (485 kg) of different type of Broaches available as spare.
- With lots of accessories like Fixtures, Arbours etc.
- Machine is in excellent working condition.

Product Details:

Macc (Italy) make Circular Cold Saw Machine in excellent working condition. The model of the machine is T.275 and the Cutting Capacity for a Solid Round Bar is 100 mm Diameter. The technical details are as follows -

Make - Macc (Italy)
Model - T.275
Max. Blade Diameter - 275 mm
Cutting Capacity (for Round) - 100 mm Diameter
Cutting Angle - +90 degree to -45 degree
No. of Blade Speeds - 2 Speeds
Motor Power - 1.8 HP / 2.6 HP
- Complete with 2 x spare Circular Blades.
- Equipped with Coolant Tank and Pump.
- Machine is in excellent working condition.

Product Details:

Horizontal Broaching Machine made by Coventry Gauge & Tool (England) in excellent working condition. The machine has been made under the License of American Broach & Machine Co (USA). The Tonnage Capacity of the machine is 3 Tons and Max. Stroke Length is 760 mm. It is a Pull-type Hydraulic Broaching Machine. The machine is complete with some spare broaches, fixtures and other accessories. The technical details are as follows -

Make - Coventry Gauge & Tool (England)
Tonnage Capacity - 3 Tons
Stroke Length - 760 mm
Type - Pull Type ; Hydraulic
Main Motor - 5 HP
- made under License of American Broach & Machine Co, USA.
- Complete with some spare Broaches, Fixtures & other accessories.
- Machine is in excellent working condition.

Product Details:

Bianco (Italy) make Fully Automatic Bandsaw Machine in excellent working condition. The model of the machine is 320-CNC and the Cutting Capacity for Round is 320 mm Diameter. The machine is equipped with a new Delta make PLC and HMI and can work in complete Full-Automatic, Semi-Automatic as well as in Manual Model. The machine is complete with Chip Conveyor, Coolant Tank, Pump, Job Conveyor Table etc.. The technical details are as follows -

Make - Bianco (Italy)
Model - 320-CNC 90 degree
Cutting Capacity (for Round) - 320 mm
Cutting Capacity (for Square) - 320 mm x 320 mm
Max. Travel for Auto-Feed Vice - 800 mm (single time)
Max. No. of Travels for Auto-Feed Vice - 4 Times
Blade Size - Length 4550 mm x Width 34 mm x Thickness 1.1 mm
Blade Speeds - 18 m/min to 100 m/min
Blade Motor Power - 2.2 kW
Type - Fully Automatic ; equipped with PLC & HMI.
- Can be used for Manual, Semi-Automatic & Full Automatic Mode.
- Stock Length adjustment is Automatic through HMI, Motor & Encoder on Lead-Screw.
- Equipped with new Delta make PLC & HMI.
- Complete with Coolant Tank, Pump, Chip Conveyor, Job Conveyor Table etc.
- Machine is in excellent working condition.

Product Details:

Gloria Super (Italy) make Automatic Pitch Controlled Tapping Machine in excellent working condition. The model of the machine is ROMA and the Maximum Tapping Capacity is 20 mm Diameter. The technical details are as follows -

Make - Gloria Super (Italy)
Model - ROMA
Capacity in Diameter - 20 mm
Table Size - 360 mm x 310 mm
Spindle Diameter - 40 mm
Max. Spindle Travel - 60 mm
Spindle Speeds - 180 rpm to 780 rpm
Spindle Motor - 1.50 HP
Different Pitch Bushes Available - 0.5 / 1.0 / 1.25 / 1.50 / 1.75 / 2.00 mm
- Complete with Coolant Tank & Pump.
- Can be used in Continuous, Timer Controlled, Singular & Impulse Mode.
- Machine is in excellent working condition.

Product Details:

Amada (Japan) make Fully Automatic Bandsaw Machine in excellent working condition. The model of the machine is HA-250 and the Cutting Capacity for Round is 250 mm Diameter. The machine can work in complete Full-Automatic as well as in Manual Model. The technical details are as follows -

Make - Amada (Japan)
Model - HA-250
Cutting Capacity (for Round) - 250 mm
Cutting Capacity (for Rectangle) - 300 mm x 250 mm
Max. Travel for Auto-Feed Vice - 400 mm (single time)
Max. No. of Travels for Auto-Feed Vice - 9 Times
Blade Size - Length 3505 mm x Width 25 mm x Thickness 0.95 mm
Blade Speeds - 20 m/min to 80 m/min
Blade Motor Power - 2.2 kW
Type - Fully Automatic ; equipped with PLC.
- Can be used in Full Automatic Mode, Semi-Automatic Mode and in Manual Mode as well.
- Operating Manual, Electrical Drawing, Hydraulic Drawings etc. are available.
- Complete with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Delapena (England) make Horizontal Honing Machine in excellent working condition. The model of the machine is Speedhone and the Bore Honing Capacity is from 1.143 mm to 79.0 mm. The technical details are as follows -

Make - Delapena (England)
Model - Speedhone
Bore Honing Capacity - 1.143 mm to 79 mm
Spindle Speeds - 250 rpm to 1000 rpm
- Honing Stone Expansion operated by a graduated control wheel.
- Honing Stone Pressure operated by a graduated control wheel.
- Equipped with its Honing Fluid Pump and Tank.
- The machine has some accessories with it as well.
- Machine is in excellent working condition.

Product Details:

Rausch (Germany) make Gear Deburring Machine in excellent working condition. The model of the machine is Gratomat 300L. It is an Auto-Cycle type machine having automatic up and down travel of the grinding wheel spindle. The machine is suitable for deburring of toothed and profiles of Gears, Bevels, Chain & Worm Wheels, Spiral & Helical Gears, Internal Gears, Pinion Shafts, & other similar profiles. The technical details are as follows -

Make - Rausch (Germany)
Model - Gratomat 300L
Max. Gear Diameter - 1400 mm
Max. Height of Job - 400 mm
Module Capacity Range - 1 Module to 20 Module
Max. Job Weight - 300 kgs
Grinding Wheel Speeds - 26000 rpm (Continuously Variable)
Table Speeds - Continuously Variable
- Automatic Up & Down of the Grinding Wheel Spindle.
- Complete Auto-Cycle Working.
- With lots of spare Grinding Wheels & equipped with Dust Collector.
- Operating Manual and Electrical Drawings are available.
- Machine is in excellent working condition.

Product Details:

Horizontal Honing Machine made by Delapena (England) in excellent working condition. The model of the machine is Speedhone 'S' and the Bore Honing Capacity is from 1.143 mm to 79.0 mm. The technical details are as follows -

Make - Delapena (England)
Model - Speedhone 'S'
Bore Honing Capacity - 1.143 mm to 79 mm
Spindle Speeds - 250 rpm to 1000 rpm
- Honing Stone Expansion operated by a graduated control wheel.
- Honing Stone Pressure operated by a graduated control wheel.
- Equipped with its Honing Fluid Pump and Tank.
- The machine has some accessories with it as well.
- Machine is in excellent working condition.

Product Details:

Details:

• Hand-wheel Control for Automatic adjustment of Stock
• Length.
• Complete with Chip Conveyor and Coolant pump.
• Operating Manual of the machine is available.
• Machine is in excellent working condition.

Product Details:

Jones & Shipman (England) make Cone Centre Lapping Machine in excellent working condition. It is used for Lapping of 60 Degree Centres originally produced for turning operations in order to correct errors introduced by hardening or rough turning, thus ensuring accuracy of grinding operations when performed between centres. The technical details are as follows -

Make - Jones & Shipman (England)
Model - 1600
Cone Angle of Centre Holes - 60 Degree
Distance from Spindle Centre to Column - 165 mm
Maximum Length of Job - 1016 mm
Max. Diameter of Centre Holes - 24 mm
Max. Diameter of Abrasive Lap - 25 mm
Spindle Speeds - 745 rpm / 1420 rpm
Spindle Vertical Feed Travel - 51 mm
- Machine is in excellent working condition.

Product Details:

Details:

• Equipped with Mitsubishi make PLC.
• Hand-Wheel Control for Automatic adjustment of Stock Length.
• Hydraulic Clamping of Job.
• Complete with Chip Conveyor, spare set of rollers, belt etc.
• Machine is in excellent working condition.

Product Details:

Trennjaeger (Germany) make Circular Cold Saw Machine in excellent working condition. The model of the machine is VC 260 and the Cutting Capacity for a Solid Round Bar is 90 mm Diameter. The technical details are as follows -

Make - Trennjaeger (Germany)
Model - VC 260
Blade Diameter - 275 mm
Cutting Capacity (for Round) - 90 mm Diameter
Cutting Capacity (for Square) - 120 mm x 50 mm
Cutting Angle - 90 degree to 40 degree
No. of Blade Speeds - 6 Speeds
Motor Power - 1.1 kW / 1.4 kW
- Complete with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Automatic Drill Grinding Machine made by Breda (Italy) in excellent working condition. The model of the machine AFP 30 and the Drill Grinding Capacity is from Diameter 2 mm to 30 mm. The technical details are as follows -

Make - Breda (Italy)
Model - AFP 30
Drill Sharpening Capacity - Diameter 2 mm to 30 mm
Minimum & Maximum Vertex Angle - 80 degree to 180 degree
Stroke of Spindle Support - 70 mm
Grinding Wheel Diameter - 152 mm
Speed of Grinding Wheel - 3,750 rpm
- Machine can sharpen 2-point, 3-point and 4-point drills.
- With Automatic Feed Travel "Automatic Depth Adjustment".
- Complete with 2 sets of spare jaws, Coolant Tank and Pump.
- Operating Manual of the machine is available.
- Machine is in excellent working condition.

Product Details:

MEP (Italy) make Manual Band Sawing Machine in excellent working condition. The model of the machine is PH 261-1 and the Cutting Capacity for Round is 225 mm Diameter. The mitering (angular) cutting ranges from 0 degree to +60 degree. The year of manufacture of this machine is 2022 and it is as good as new. The technical details are as follows -

Make - MEP (Italy)
Model - PH 261-1
Cutting Capacity for Round - 225 mm
Cutting Capacity for Square - 200 mm x 200 mm
Cutting Capacity for Rectangle - 240 mm x 160 mm
Angular Cutting Range - 0 degree to +60 degree
Blade Size - 2450 mm x 27 mm x 0.9 mm
Max. Vice Opening - 245 mm
Blade Motor Power - 0.7 kW / 0.81 kW
Blade Rotation Speed - 46 m/min and 92 m/min
Year of Manufacturer - 2022
- Complete with Coolant Tank and Pump.
- Machine is in excellent working condition.

Product Details:

Anbas (Italy) make Manual Bandsaw Machine in excellent working condition. The Cutting Capacity of the machine is 150 mm and it is complete with its Coolant Pump and Tank. The technical details are as follows -

Make - Anbas (Italy)
Capacity - 150 mm
Blade Size - Length 2025 mm x 19 mm Width
Job Clamping - Manual
Main Motor (Double Speed) - 0.37 kW / 0.75 kW
 - Angular Cutting of Jobs is possible.
- Complete with Coolant Pump and a spare Blade.
- Machine is in excellent working condition.

Product Details:

Heavy-Duty Angle Plates suitable for a Floor Boring Machine in excellent condition. These are Made in Italy and have a Size of 3000 mm x 1080 mm. These Angle Plates are available for sale separately. The technical details are as follows -

Country of Origin - Italy
Working Plate Size - 3000 mm (Height) x 1080 mm (Width)
Thickness of Plate - 63.5 mm
Weight of Each Plate - 5.05 tons (Approximately)
No. of Plate Available - 2 pcs.
- Suitable for a Floor Boring Machine or other similar applications.
- These plates are in very good condition.

Product Details:

Piesok (Czech Republic) make Ironworker Machine in excellent working condition. The Cutting Capacity for Round Bar is 25 mm and for Angle is 60 mm x 60 mm x 8 mm. The technical details are as follows -

Make - Piesok (Czech Republic)
Model - NPM-10
Round Cutting Capacity - 25 mm
Square Cutting Capacity - 25 mm x 25 mm
Angle Cutting Capacity - 60 mm x 60 mm x 8 mm
T Shape Angle Cutting Capacity - 60 mm x 60 mm x 8 mm
Plate Cutting Capacity - 12 mm x 50 mm
Weight - 520 kg Approximately.
Type - Mechanical
- Machine is in excellent working condition.

Product Details:

Kingsland (England) make Ironworker Machine in excellent working condition. The model of the machine is 75XS and it is a Hydraulic type machine. The machine has a Cutting Capacity for Round Bar of 50 mm and Cutting Capacity for Angle is 150 mm x 150 mm x 13 mm. The machine is capable of Section Cutting, Plate Shearing, Punching, Notching, Angle Cutting etc. The machine is complete with lots of tools and accessories as well. The technical details are as follows -

Make - Kingsland (England)
Model - 75XS Hydraulic
Round Bar Cutting Capacity - 50 mm
Square Bar Cutting Capacity - 50 mm x 50 mm
Angle Cutting Capacity - 150 mm x 150 mm x 13 mm
Flat Bar Shearing Capacity - 330 mm x 20 mm
Punching Capacity - 30 mm x 20 mm
Notching Capacity (Rectangular) - 52 mm x 13 mm (Thickness)
Machine Weight - 2.4 Tons (Approx)
Type - Hydraulic
- Complete with lots of toolings and other accessories.
- Machine is in excellent working condition.