Lathe Machine

Product Details:

Sabre (Italy) make Lathe Machine in excellent working condition. The Center Height of the Machine is 305 mm and the Max. Length of Job is 6000 mm. The machine is equipped with a Grinding Attachment. The technical details are as follows -

Make - Sabre (Italy)
Center Height - 305 mm
Max. Length of Job - 6000 mm
Max. Job Diameter over Bed - 600 mm
Max. Job Diameter over Cross-Slide - 390 mm
Chuck Diameter - 310 mm
Bed Width - 430 mm
Max. Spindle Speeds - 1100 rpm
Spindle Bore - 78 mm
- Equipped with Grinding Attachment.
- Gap Bed Type Lathe Machine.
- Machine is in excellent working condition.

Product Details:

Colchester (England) make Lathe Machine in excellent working condition. The model of the machine is Student 1800 and the Max. Length of Job is 650 mm. The technical details are as follows -

Make - Colchester (England)
Model - Student 1800
Center Height - 165 mm
Max. Length of Job - 650 mm
Max. Job Diameter over Bed - 330 mm
Max. Job Diameter over Cross-Slide - 210 mm
Max. Job Diameter in Gap - 480 mm
4-Jaw Chuck Diameter - 250 mm
3-Jaw Chuck Diameter - 200 mm
Bed Width - 230 mm
Spindle Speeds - 22 rpm to 1800 rpm
Spindle Bore - 40 mm
- Machine is in excellent working condition.

Product Details:

WMW (Germany) make Extra Heavy Duty Lathe Machine in excellent working condition. The model of the machine is DPS 1800 x 3150 and it is a Three Slide type Heavy Duty Lathe Machine. The Bed of the Machine has been extended to accommodate admit between centers of 4000 mm. The technical details are as follows -

Make - WMW (Germany)
Model - DPS 1800 x 3150
Center Height - 910 mm
Max. Job Diameter over Bed - 1800 mm
Max. Job Diameter over Cross-Slide - 1500 mm
Max. Job Length - 3400 mm (without using Bed extension)
Max. Admit b/w Centers - 4000 mm (with extended Bed)
Chuck Diameter - 1600 mm
Bed Width - 1120 mm
Spindle Speeds - 3.55 rpm to 180 rpm
Spindle Bore - 120 mm
Machine Weight - 17 Tons (Approximately)
- With Motorised Rapid Travels of Carriage & Cross-Slide.
- Tool-Slide (Top Slide) also has powered Feed Travels.
- Three Slide type Heavy Duty Lathe Machine.
- Complete with a 4-point steady rest.
- Machine is in excellent working condition.

Product Details:

Colchester (England) make Lathe Machine
in excellent working condition. The model of the machine is Student 1800 and the Max. Length of Job is 650 mm. The technical details are as follows -

Make - Colchester (England)
Model - Student 1800
Center Height - 165 mm
Max. Length of Job - 650 mm
Max. Job Diameter over Bed - 330 mm
Max. Job Diameter over Cross-Slide - 210 mm
Max. Job Diameter in Gap - 480 mm
4-Jaw Chuck Diameter - 250 mm
3-Jaw Chuck Diameter - 200 mm
Bed Width - 230 mm
Spindle Speeds - 22 rpm to 1800 rpm
Spindle Bore - 40 mm
- Machine is in excellent working condition.

Product Details:

Colchester (England) make Gap bed type Lathe Machine in excellent working condition.The model of the machine is Triumph 2000 and the Max.Length of Job is 1270 mm. The technical details are as follows -

Make - Colchester (England)
Model - Triumph 2000
Center Height - 195 mm
Length of Job - 1270 mm
Max. Diameter of Job over Bed - 390 mm
Max. Diameter of Job over cross-slide - 240 mm
Max. Diameter of Job in Gap - 600 mm
Spindle Speeds - 25 rpm to 2000 rpm
Spindle Bore - 55 mm
Chuck Diameter - 250 mm
Bed Width - 280 mm
- Machine is in excellent working condition.

Product Details:

Cazeneuve (France) make Heavy duty Tool Room Lathe Machine in excellent working condition. The model of the machine is 590 HBY and the Length of Job is 1000 mm.The technical details are as follows -

Make - Cazeneuve (France)
Model - 590 HBY
Center Height - 295 mm
Length of Job - 1000 mm
Max. Job Diameter over Bed - 590 mm
Max. Job Diameter over Cross-Slide - 300 mm
Chuck Diameter - 250 mm
Spindle Bore - 60 mm
Spindle Speeds - 5.6 rpm to 3200 rpm (Continuously Variable)
Bed Width - 435 mm
- Equipped with 2 Axis DRO.
- Machine is in excellent working condition.

Product Details:

Colombo Morando (Italy) make Heavy Duty Lathe Machine in excellent working condition.The model of the machine is PL 30 and the Center Height is 315 mm.The technical details are as follows -

Make - Colombo Morando (Italy)
Model - PL 30
Center Height - 315 mm
Max. Length of Job - 1700 mm
Max. Job Diameter over Bed - 630 mm
Max. Job Diameter over Cross-Slide - 400 mm
Bed Width - 500 mm
Chuck Diameter - 380 mm
Spindle Speeds - 12 rpm to 1200 rpm
Spindle Bore - 80 mm
- Complete with Follow Rest and a Steady.
- Machine is in excellent working condition.

Product Details:

TOS SV-18R Lathe Machine in excellent working condition. The Center Height of the machine is 190 mm and Max. Length of Job is 1000 mm.The technical details are as follows -


Make - TOS (Czech Republic)
Model - SV-18R
Center Height - 190 mm
Length of Job - 1000 mm
Max. Job Diameter over Bed - 380 mm
Max. Job Diameter over Cross-Slide - 220 mm
Bed Width - 340 mm
Spindle Speeds - 14 rpm to 2800 rpm
Spindle Bore - 40 mm
Chuck Diameter - 200 mm
- Machine is in excellent working condition.

Product Details:

Skoda (Czech Republic) make Heavy-Duty Lathe Machine in excellent working condition.The model of the machine is SRM 100 and the Max. Length of Job is 6200 mm. The technical details are as follows -

Make - Skoda (Czech Republic)
Model - SRM 100
Center Height - 570 mm
Max. Length of Job - 6200 mm
Max. Job Diameter over Bed - 1140 mm
Max. Job Diameter over Cross-Slide - 750 mm
Chuck Diameter - 1000 mm
Bed Width - 950 mm
Spindle Speeds - 1.8 rpm to 400 rpm
Weight of the Machine - 15.5 Tons (Approximately)
- Complete with a Steady, Operating Manual & other accessories.
- With Motorized Rapid Travels of Carriage & Cross-Slide.
- Tool-Slide (Top Slide) also has powered Feed Travels.
- Feature of Automatic Taper Turning.
- Machine is in excellent working condition.

Product Details:

Korean make Lathe Machine in excellent working condition. The model of the machine is S1-250 and the Length of Job is 1500 mm.The technical details are as follows -

Make - Korea
Model - S1-250 (same as TOS SU 50 Lathe)
Center Height - 250 mm
Length of Job - 1500 mm
Max. Swing Diameter over Bed - 500 mm
Max. Swing Diameter over Cross-Slide - 270 mm
Bed Width - 420 mm
Spindle Speeds - 11.2 rpm to 1400 rpm
Spindle Bore - 55 mm
Chuck Diameter - 250 mm
- Motorized Rapid Travels on Carriage & Cross-Slide.
- Machine is in excellent working condition.

Product Details:

Skoda (Czech Republic) make Heavy Duty Lathe Machine in excellent working condition.The Center Height of the Machine is 375 mm and the Max. Length of Job is 4000 mm.The model of the machine is SUR 350 and it is equipped with an Automatic Taper Turning Attachment.The technical details are as follows -

Make - Skoda (Czech Republic)
Model - SUR 350
Center Height - 375 mm
Max. Swing Diameter over Bed - 750 mm
Max. Length of Job - 4000 mm
Max. Job Diameter over Cross-Slide - 440 mm
Bed Width - 650 mm
Chuck Diameter - 500 mm
Spindle Speeds - 7.4 rpm to 950 rpm
Spindle Bore - 50 mm
- Equipped with Taper Turning Attachment.
- With 2 x Steady and a lot of other Accessories.
- Motorised Rapid Travels of the Carriage.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Heavy-Duty Lathe Machine in excellent working condition. The model of the machine is SU 63A / 2000 and the Center Height is 315 mm and the Length of Job is 2000 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - SU 63A / 2000
Center Height - 315 mm
Max. Length of Job - 2000 mm
Max. Diameter of Job over Bed - 630 mm
Max. Diameter over Cross-Slide - 360 mm
Spindle Speeds - 8 rpm to 1180 rpm
Bed Width - 565 mm
Chuck Diameter - 400 mm
Spindle Bore - 60 mm
- Complete with 3-point steady, coolant tray, coolant pump etc.
- With Motorized Rapid Travels on the Carriage & Cross-Slide.
- Machine is a very heavy duty type Lathe Machine.
- Machine is in excellent working condition.

Product Details:

Colchester (England) make All-Geared Lathe Machine in excellent working condition. The model of the machine is Triumph 2000 and the Max. Length of Job is 1270 mm. The technical details are as follows -

Make - Colchester (England)
Model - Triumph 2000
Center Height - 195 mm
Length of Job - 1270 mm
Max. Diameter of Job over Bed - 390 mm
Max. Diameter of Job over cross-slide - 240 mm
Bed Width - 280 mm
Spindle Speeds - 25 rpm to 2000 rpm
Spindle Bore - 55 mm
Chuck Diameter (4-Jaw) - 305 mm
Chuck Diameter (3-Jaw) - 250 mm
Swing Diameter in Gap - 600 mm
- Complete with 4-jaw chuck, 3-jaw chuck & collet chuck.
- Complete with 3-point steady, and some other accessories.
- Machine is in excellent working condition.

Product Details:

Nosotti (Italy) make Heavy-Duty Lathe Machine in excellent working condition. The Center Height of the machine 450 mm and the Length of Job is 1500 mm. The technical details are as follows -

Make - Nosotti (Italy)
Model - T. 450/1500
Center Height - 450 mm
Max. Length of Job - 1500 mm
Max. Diameter of Job over Bed - 900 mm
Max. Diameter of Job over Cross-Slide - 640 mm
Max. Diameter of Job over Gap - 1200 mm
4-Jaw Chuck Diameter - 710 mm
3-Jaw Chuck Diameter - 350 mm
Bed Width - 500 mm
Spindle Bore - 105 mm
Spindle Speeds - 5 rpm to 800 rpm
- Complete with 3-point Steady & tool-Holders etc.
- Machine is in excellent working condition.

Product Details:

Colchester (England) make Lathe Machine in excellent working condition. The model of this machine is Triumph 2500 and the Maximum Length of Job is 1250 mm. The technical details are as follows -


Make - Colchester (England)
Model - Triumph 2500
Center Height - 205 mm
Max. Length of Job - 1250 mm
Max. Swing over Bed - 410 mm
Max. Job Diameter over Cross-Slide - 245 mm
Spindle Speeds - 15 rpm to 2500 rpm
Bed Width - 320 mm
3-Jaw Chuck Diameter - 250 mm
4-Jaw Chuck Diameter - 315 mm
Max. Swing Diameter in Gap - 585 mm
Spindle Bore - 55 mm
- Complete with 3-point steady.
- Equipped with Drive for Spindle Motor for continuously variable spindle speeds.
- Machine is in excellent working condition.

Product Details:

Make - Tacchi (Italy)
Model - FTC 71
Center Height - 710 mm
Max. Length of Job - 8000 mm
Max. Diameter of Job over Bed - 1420 mm
Max. Diameter of Job over Cross-Slide - 950 mm
Bed Width - 850 mm
Chuck Diameter - 1200 mm
Spindle Speeds - 5 rpm to 475 rpm
Spindle Bore - 160 mm
Weight of Machine - 27 tons (approximately)
- With Motorized Rapid Travels of Carriage & Tool-Slide.
- Tool-Slide (Top Slide) also has powered Feed Travels.
- Complete with 2 x Steady and 1 x Follow Rest.
- Machine is in excellent working condition.

Product Details:

Make - TOS-Trencín (Czech Republic)
Model - SUI 40/1500
Center Height - 210 mm
Max. Length of Job - 1500 mm
Max. Job Diameter over Bed - 420 mm
Max. Job Diameter over Cross-Slide - 220 mm
Bed Width - 360 mm
Spindle Speeds - 7 rpm to 2240 rpm (Infinitely Variable)
Spindle Bore - 56 mm
- Equipped with Taper Turning Attachment.
- With Motorised Rapid Travel of the Carriage & Cross-Slide.
- Equipped with a NEW Electrical Drive for the Spindle Motor.
- Machine is in excellent working condition

Product Details:

Make - MSZ (Hungary)
Center Height - 325 mm
Max. Length of Job - 2000 mm
Max. Job Diameter over Bed - 650 mm
Max. Job Diameter over Cross-Slide - 430 mm
Max. Job Diameter in Gap Bed - 850 mm
Bed Width - 490 mm
Spindle Speeds - 7.1 rpm to 1400 rpm
Spindle Bore - 75 mm
Chuck Diameter - 400 mm
- With Motorised Rapid Travel of the Carriage & Cross-Slide.
- Complete with Follow Rest, Coolant Pump, etc.
- Machine is in excellent working condition.

Product Details:

Make - Colchester (England)
Model - Triumph 2500
Center Height - 205 mm
Max. Length of Job - 1250 mm
Max. Swing over Bed - 410 mm
Max. Job Diameter over Cross-Slide - 245 mm
Spindle Speeds - 15 rpm to 2500 rpm
Bed Width - 315 mm
Chuck Diameter - 250 mm
Max. Swing Diameter in Gap - 585 mm
Spindle Bore - 55 mm
- Equipped with Taper Turning Attachment.
- Equipped with 2-Axis DRO.
- Complete with 3-point steady, centers, safety covers etc.
- Equipped with Drive for Spindle Motor for continuously
variable spindle speeds.
- Machine is in excellent working condition.

Product Details:

Make - Colombo (Italy)
Model - TSF-1600
Center Height - 850 mm
Max. Length of Job - 3000 mm
Max. Diameter of Job over Bed - 1700 mm
Max. Diameter of Job over Cross-Slide - 1200 mm
Bed Width - 1000 mm
Chuck Diameter - 1200 mm
Spindle Speeds - 4 rpm to 290 rpm
Spindle Bore - 120 mm
Weight of Machine - 15.5 tons (approximately)
- With Motorized Rapid Travels of Carriage & Tool-Slide.
- Tool-Slide (Top Slide) also has powered Feed Travels.
- Complete with a very big sized 3-point steady.
- Complete with an extra tool-post for turning purposes.
- Machine recently overhauled in Europe; in excellent working condition.

Product Details:

Make - Antonio-Anselmi (Italy)
Model - ManoFap 325 EA
Center Height - 335 mm
Max. Length of Job - 1500 mm
Max. Diameter of Job over Bed - 670 mm
Max. Diameter of Job over Cross-Slide - 430 mm
Bed Width - 440 mm
Spindle Speeds - 10 rpm to 1000 rpm
Spindle Bore - 65 mm
Chuck Diameter - 350 mm
Max. Diameter of Job over Gap-Bed - 850 mm
- Equipped with 2-Axis D.R.O.
- Machine is in excellent working condition.

Product Details:

Make - Gornati (Italy)
Model - Legoor 300
Center Height - 315 mm
Max. Length of Job - 1500 mm
Max. Diameter of Job over Bed - 625 mm
Max. Diameter of Job over Cross-Slide - 370 mm
Bed Width - 500 mm
Spindle Speeds - 13 rpm to 1000 rpm
Spindle Bore - 108 mm
Chuck Diameter - 350 mm
Max. Diameter of Job over Gap-Bed - 900 mm
Length of Job in Gap - 250 mm
Weight of the Machine - 3.75 tons (approx.)
- With Motorised Rapid Travel of Carriage & Cross-Slide.
- Machine is in excellent working condition.

Product Details:

Make - Giana (Italy)
model -3800
Center Height - 370 mm
Length of Job - 3800 mm
Max. Dia. of Job over Bed - 740 mm
Max. Dia. of Job over Cross-Slide - 475 mm
Bed Width - 450 mm
Spindle Bore - 155 mm
Spindle Speeds - 9 rpm to 1030 rpm
4-Jaw Chuck Diameter - 710 mm
3-Jaw Chuck Diameter - 430 mm
- Complete with 2 x 2-point steady, 3-point steady & running-steady.
- With Motorised Rapid Travel of the Carriage.
- Complete with 3-jaw chuck, 4-jaw chuck and spare flange.
- Accessories like tool holders, spare jaws of chuck, other
toolings etc.
- Machine is in excellent working condition.

Product Details:

Make - Colchester (England)
Model - Mastiff VS 1800
Center Height - 275 mm
Max. Length of Job - 1100 mm
Max. Diameter of Job over Bed - 550 mm
Max. Diameter of Job over Cross-Slide - 370 mm
Bed Width - 400 mm
Spindle Speeds - 18 rpm to 1800 rpm
Spindle Bore - 90 mm
Chuck Diameter - 310 mm
Max. Diameter of Job in Gap - 830 mm
Year of Make - 1996
- Motorized Rapid Travel of Carriage & Cross-Slide.
- Equipped with Drive for Spindle Motor for continuously variable spindle speeds.
- Latest series of conventional Lathes manufactured by Colchester company.
- Machine is in excellent working condition.

Product Details:

Make - Merli (Italy)
Model - Clovis 50
Center Height - 650 mm
Length of Job - 5300 mm
Swing Diameter over Bed - 1300 mm
Swing Diameter over Cross-Slide - 900 mm
Chuck Diameter - 1000 mm
Spindle Bore - 155 mm
Bed Width - 600 mm
- With Motorized Rapid Travels of Carriage & Tool-Slide.
- Tool-Slide (Top Slide) also has powered Feed Travel.
- Equipped with 2-Axis DRO
- Complete with a 3-point steady.
- Machine is in excellent working condition

Product Details:

Make - Grazioli (Italy)
Model No.-300x1500
Max. Length of Job - 1500 mmCenter Height - 305 mm
Max. Swing Diameter over Bed - 600 mm
Max. Swing Diameter over Cross-slide - 400 mm
Bed Width - 450 mm
Spindle Speeds - 15 rpm to 1750 rpm
Spindle Bore - 90 mm
4-Jaw Chuck Diameter - 450 mm
3-Jaw Chuck Diameter - 350 mm
- Equipped with 2-Axis DRO
- Complete with Grinding Attachment, 3-point steady, 2 x chucks, etc.
- Lots of accessories like tool holders, 5-sets of jaws of chuck, boring bars & many other tools.
 - Machine is a very heavy duty type lathe machine.
- Machine's Bed-ways are hardened and ground.
- Bed is completely scratch-less, as good as new. 
- Machine is in excellent working condition.

Product Details:

• Make - Broadbent (England)
• Center Height - 550 mm
• Length of Job - 5,000 mm
• Bed Width - 915 mm
• Chuck Diameter - 1070 mm
• Swing Over Cross-slide - 850 mm
• Center Height in Gap - 830 mm
• Spindle Bore - 115 mm- Machine is an Import piece & in excellent condition.

Product Details:

Make – Holbrook (England)
Model – Model B No. 13
Length between Centers – 24”
Maximum Swing over Relieving Slide – 5.25”
Range of Speeds – 2.5 rpm to 96.6 rpm
Range of Thread (inch Lead)– 0.079" to 4.8"
Range of Feeds – 0.006" to 0.370"
Range of Reliefs - 2 to 40
Range of Standard Cams – 3/32” , 5/32”
Rise of Hob Grinding Cams – 5/16”
- Capacity same for grinding & relieving.
- Complete with Change gears etc.
- Machine is in excellent condition.

Product Details:

Make - Torgim (Italy)
Center Height - 370 mm
Length of Job - 3000 mm
Max. Diameter of Job over Bed - 740 mm
Max. Diameter of Job Over Cross-Slide - 500 mm
4-Jaw Chuck Diameter - 550 mm
Bed Width - 415 mm
Spindle Speeds - 23 rpm to 1000 rpm
Spindle Bore - 80 mm
- Complete with reverse jaws, centers, drill chuck, handles etc.
- Bed of the machine is completely scratch-less.
- Machine is in excellent working condition.

Product Details:

Make - TOS (Czech Republic)
Model - SU 80A / 2750
Center Height - 405 mm
Max. Length of Job - 2750 mm
Max. Job Diameter over Bed - 810 mm
Max. Job Diameter over Cross-Slide - 500 mm
Bed Width - 700 mm
Chuck Diameter - 500 mm
Spindle Bore - 70 mm
Spindle Speeds - 6.7 rpm to 1000 rpm
- With Motorized Rapid Travels on Carriage & Cross-Slide.
- Complete with coolant collection tray & pump etc.
- Machine is in excellent working condition.

Product Details:

Skoda (Czech Republic) make Heavy-Duty Lathe Machine in excellent working condition. The model of the machine is SR 1250 and the Max. Length of Job is 9200 mm. The technical details are as follows -

Make - Skoda (Czech Republic)
Model - SR 1250
Center Height - 700 mm
Max. Length of Job - 9200 mm
Max. Job Diameter over Bed - 1400 mm
Max. Job Diameter over Cross-Slide - 950 mm
Chuck Diameter - 1250 mm
Bed Width - 1100 mm
Spindle Speeds - 1.4 rpm to 315 rpm
Weight of the Machine - 25.8 Tons (Approximately)
- Equipped with 2-Axis Digital Read-Out.
- Equipped with 3 x 3-point Steady.
- With Motorized Rapid Travels of Carriage & Tool-Slide.
- Tool-Slide (Top Slide) also has powered Feed Travels.
- Feature of Automatic Taper Turning.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Heavy Duty Lathe Machine in excellent working condition. The model of the machine is SU 50A/2000 and the Center Height is 255 mm and the Max. Length of Job is 2000 mm. The technical details are as follows -


Make - TOS-Kurim (Czech Republic)
Model - SU 50A / 2000
Center Height - 255 mm
Max. Length of Job - 2000 mm
Max. Job Diameter over Bed - 500 mm
Max. Job Diameter over Cross-Slide - 280 mm
Spindle Speeds - 11.2 rpm to 1400 rpm
Bed Width - 425 mm
Chuck Diameter - 315 mm
Spindle Bore - 60 mm
- Complete with a 3-point steady & follow-rest.
- Motorized Rapid Travels on the Carriage & Cross-Slide.
- Machine is in excellent working condition.

Product Details:

Harrison (England) make Tool Room Lathe Machine in excellent working condition. The model of the machine is V330 and the Admit between Centers is 1000 mm. It is equipped with an AC Drive for Spindle Motor for infinitely variable spindle speeds. The technical details are as follows -

Make - Harrison (England)
Model - V330
Center Height - 165 mm
Max. Length of Job - 1000 mm
Max. Job Diameter over Bed - 330 mm
Max. Job Diameter over Cross-Slide - 210 mm
Spindle Speeds - 20 rpm to 3000 rpm (Continuously Variable)
Bed Width - 205 mm
3-Jaw Chuck Diameter - 160 mm
4-Jaw Chuck Diameter - 200 mm
Spindle Bore - 40 mm
- Gap Bed type Lathe Machine.
- Equipped with 2-Axis DRO.
- Equipped with AC Drive for Spindle Motor.
- Machine is in excellent working condition.

Product Details:

Make - CVA (England)
Model - 1A
Center Height - 160 mm
Max. Length of Job - 750 mm
Max. Diameter over Bed - 320 mm
Max. Diameter over Cross-Slide - 160 mm
Bed Width - 265 mm
Spindle Speeds - 29 rpm to 2220 rpm
Spindle Bore - 35 mm
Chuck Diameter - 155 mm
- Machine is equipped with a 2-Axis DRO.
- Complete with Faceplate, Collets, Change Gears etc.
- Machine is in excellent working condition.

Product Details:

Make - Tovaglieri & Co. (Italy)
Center Height - 175 mm
Length of Job - 750 mm
Swing over Bed - 350 mm
Swing over Cross-Slide - 180 mm
Bed Width - 270 mm
Chuck Diameter - 230 mmSpindle Bore - 45 mm
- Complete with 3-point steady & 2-point steady.
- With coupling, change gears, spare tool holders, reverse jaws etc.
- With almirah full of tooling, boring bar, etc.
- Machine is in excellent working condition.