Thread Milling Machine

Product Details:

Hille (Germany) make Thread Milling Machine in excellent working condition. The model of the machine is FL1 and the Maximum Job Length is 1100 mm and the Maximum Job Diameter is 180 mm. The technical details are as follows -

Make - Hille (Germany)
Model - FL1
Max. Job Diameter - 180 mm
Max. Job Length - 1100 mm
Max. Cutter Diameter - 115 mm
Spindle Bore - 82 mm
Swing Diameter Over Bed - 380 mm
Cutter Swivel Angle - 120 degree to -45 degree
- Thread Milling, Spline Milling and Gear Hobbing operations possible.
- Complete with Change Gears, Index Plates, Collets, Cutters etc.
- Machine is in excellent working condition.

Product Details:

Thread Milling Machine made by Lees Bradner (USA) in excellent working condition. The model of the machine is HT 12x54 and it is a Heavy Duty type Thread and Spline Milling Machine. The Maximum Job Diameter is 305 mm (12") and the Max. Cutting Length is 1372 mm (54"). The technical details are as follows -

Make - Lees Bradner (USA)
Model - HT 12x54
Max. Job Diameter - 305 mm (12")
Max. Length of Job - 1372 mm (54")
Spindle Bore - 152 mm (6")
Range of Cutter Head Rotation - 135˚to -45˚
Max. Cutter Diameter - 178 mm (7")
Max. Swing Diameter of Job - 610 mm (24")
- With Rapid Longitudinal Travel of the Carriage.
- Operating Manual of the Machine is available.
- Machine is in excellent working condition.

Product Details:

Thread Milling Machine made by Pratt & Whitney (USA) in excellent working condition. The model of the machine is 6 x 20 and the Maximum Job Diameter is 150 mm and the Maximum Job Length is 500 mm. The technical details are as follows -

Make - Pratt & Whitney (USA)
Model - 6 x 20
Max. Job Diameter - 150 mm (6")
Max. Job Length - 500 mm (20")
Max. Cutter Diameter - 115 mm (4.5")
Spindle Bore - 101 mm (4")
Swing Diameter Over Bed - 400 mm (16")
No. of Indexes - 2, 3, 4, 6, 8, 12, 24
Cutter Swivel Angle - 90 degree to -42 degree
- Machine is in excellent working condition.

Product Details:

Graziano (Italy) make Thread Milling Machine in excellent working condition. The model of the machine is FFL 43 and the Max. Working Length of Job is 3000 mm. The machine is capable of Thread Milling, Worm Milling, Spline Milling and Spline & Gear Hobbing operations. The technical details are as follows -

Make - Graziano (Italy)
Model - FFL 43
Center Height - 205 mm
Max. Working Length of Job - 3000 mm
Max. Job Diameter - 260 mm
Max. Swing Diameter over Bed - 400 mm
Max. Cutter Diameter - 125 mm
Cutter Speeds - 55 rpm to 250 rpm
Cutter Head Rotation - 55 degree LH to 96 degree RH
Max. Length of Job - 3100 mm
Chuck Diameter - 200 mm
- With 2 x Steady, Change Gears, Index Plates & other accessories.
- Operating Manual of the machine is available.
- Machine is in excellent working condition.

Product Details:

WMW (Germany) make Worm & Thread Milling Machine in excellent working condition. The model of the machine is GFL-400 and the Max. Length of Job is 2000 mm. The machine is capable of Gear Hobbing, Spline Hobbing, Spline Milling, Thread Milling & Worm Milling Operations. This machine also has a Differential Gearbox and hence can do Helical Gear Teeth Cutting as well. The technical details are as follows -

Make - WMW (Germany)
Model - GFL-400
Center Height - 205 mm
Max. Length of Job - 2000 mm
Max. Job Diameter over Cross-Slide - 200 mm
Max. Swing Diameter over Bed - 400 mm
Cutter Speeds - 55 rpm to 250 rpm
Max. Cutter Diameter - 100 mm
Spindle Bore - 80 mm
- Capable of doing Thread Milling, Worm Milling & Spline Milling.
- Capable of doing Gear Hobbing & Spline Hobbing as well.
- Complete with Change Gears, Index Plates, Arbours, & other accessories.
- Machine is in excellent working condition.

Product Details:

Lees Bradner (USA) make Thread Milling Machine in excellent working condition. The model of the machine is LT type and it is complete with Change Gears, Operating Manuals & Electrical Drawings. The Maximum Job Diameter is 203 mm (8") and the Max. Cutting Length is 915 mm (36"). The technical details are as follows -

Make - Lees Bradner (USA)
Model - "LT" type
Max. Job Diameter - 203 mm (8")
Max. Length of Job - 915 mm (36")
Max. Length with Hydraulic Chuck installed - 762 mm (30")
Max. Cutter Diameter - 108 mm (4.25")
Cutter Speeds - 80 rpm to 350 rpm
Range of Cutter Head Rotation - LH 135 degree to RH 45 degree
Max. Swing Diameter of Job - 444 mm (17.5")
No. of Holes in Index Plate - 20
Hydraulic Chuck Diameter - 205 mm
- Equipped with Automatic Hydraulic Chuck and Hydraulic Tail-Stock.
- Complete with Change Gears, Operating Manual & Electrical Drawings.
- Machine is in excellent working condition.

Product Details:

Huller Hille (Germany) make Thread Milling Machine in excellent working condition. The Center Height of the machine is 340 mm and the Max. Length of Job is 1000 mm. The technical details are as follows -

Make - Huller Hille (Germany)
Center Height - 340 mm
Max. Length of Job - 1000 mm
Max. Diameter of Job - 400 mm
Max. Diameter over Bed - 680 mm
Max. Cutter Diameter - 200 mm
Cutter Head Rotation - 45 Degree to -30 Degree
- With Rapid Travels of the Cross-Slide & Carriage.
- Automatic Indexing.
- Automatic Cycle Working.
- Electrical Drawings, Calculation tables etc available.
- Complete with Change Gears.
- Machine is in excellent working condition

Product Details:

WMW (Germany) make Worm & Thread Milling Machine in excellent working condition. The model of the machine is GFL 1000 and the Max. Job Diameter is 200 mm and the Max. Length of Job is 1000 mm. The machine is capable of Worm Milling, Thread Milling, Spline Milling and Spline & Gear Hobbing operations. The technical details are as follows -

Make - WMW (Germany)
Model - GFL 1000
Center Height - 210 mm
Max. Length of Job - 1000 mm
Max. Job Diameter - 200 mm
Max. Swing Diameter over Bed - 410 mm
Cutter Speeds - 28 rpm to 250 rpm
Max. Cutter Diameter - 125 mm
Spindle Bore - 75 mm
Cutter Head Rotation - 112 Degree to -62 Degree.
- Machine has lots of spare cutters (~136 pcs) with it.
- With Steady Rest, Job Support, Change Gears & other accessories.
- Machine is in excellent working condition.