Drilling Machine

Product Details:

MAS (Czech Republic) make Radial Drilling Machine in excellent working condition. The model of the machine is VO-50 and the Drilling Capacity is 60 mm. The Spindle Taper is MT-5 and the Spindle Diameter is 85 mm. The machine is complete with a Tilting type Cube Table. The technical details are as follows -

Make - MAS (Czech Republic)
Model - VO-50
Drilling Capacity - 60 mm
Spindle Diameter - 85 mm
Arm Length - 1370 mm
Spindle Speeds - 28 rpm to 2500 rpm
Spindle Taper - MT 5
Spindle Feed Travel - 310 mm
Spindle Feed Rate of Travel - 0.05 mm/rev to 2.00 mm/rev
Vertical Travel of Arm - 750 mm
Table Size - 550 mm x 550 mm
Tilting Angle of Table - 0 degree to 90 degree
Clamping Type - Hydraulic
- Electrical Drawings & Operating Manual is available.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Radial Drilling Machine in excellent working condition. The model of the machine is VR-4 and the Drilling Capacity of the Machine is 50 mm. The machine is complete with Cube Table, Clamping Vice, & a 3-Jaw self-centering chuck. The technical details are as follows -

Make - TOS (Czech Republic)
Model - VR-4
Drilling Capacity - 50 mm
Spindle Diameter - 75 mm
Arm Length - 1470 mm
Spindle Speeds - 45 rpm to 2000 rpm
Spindle Taper - MT 4
Spindle Feed Travel - 310 mm
Spindle Feed Rate of Travel - 0.025 mm/rev to 1.58 mm/rev
Vertical Travel of Arm - 680 mm
Cube Table Size - 705 mm x 705 mm
Clamping Type - Manual
- Complete with Clamping Vice & 3-Jaw Chuck.
- Machine is in excellent working condition.

Product Details:

MAS (Czech Republic) make Radial Drilling Machine in excellent working condition. The model of the machine is VR-6 and the Drilling Capacity of the Machine is 80 mm and the Arm Length is 2300 mm. The technical details are as follows -

Make - MAS (Czech Republic)
Model - VR-6
Drilling Capacity - 80 mm
Spindle Diameter - 90 mm
Arm Length - 2300 mm
Spindle Speeds - 16 rpm to 1410 rpm
Spindle Taper - MT-5
Spindle Feed Travel - 380 mm
Spindle Feed Rate of Travel - 0.031 mm/rev to 2.00 mm/rev
Vertical Travel of Arm - 875 mm
Max. Height between Spindle to Top of Base - 2125 mm
Tilting Cube Table Size - 550 mm x 550 mm
Tilting Angle of Cube Table - 0 to 90 degree
Clamping Type for Drilling Head - Manual
Clamping Type for Arm - Motorised
- Machine is in excellent working condition.

Product Details:

Radial Drilling Machine made by MAS (Czech Republic) in excellent working condition. The model of the machine is VR 4 and the Drilling Capacity of the Machine is 50 mm. The machine is complete with a Tilting type Cube Table and Coolant Pump. The technical details are as follows -

Make - MAS (Czech Republic)
Model - VR 4
Drilling Capacity - 50 mm
Spindle Diameter - 75 mm
Arm Length - 1470 mm
Spindle Speeds - 45 rpm to 2000 rpm
Spindle Taper - MT 4
Spindle Feed Travel - 310 mm
Spindle Feed Rate of Travel - 0.025 mm/rev to 1.58 mm/rev
Vertical Travel of Arm - 680 mm
Tilting Cube Table Size - 550 mm x 550 mm
Tilting Angle of Cube Table - 0 to 90 Degree
Clamping Type - Manual
- Machine is in excellent working condition.

Product Details:

Heavy Duty Radial Drilling Machine made by Raboma (Germany) in excellent working condition. The Drilling Capacity in Steel of the Machine is 63 mm and in Cast Iron is 75 mm. The machine has automatic motorised clamping for the Drilling Head and for the Arm. The technical details are as follows -

Make - Raboma (Germany)
Model - 12Uh1250
Drilling Capacity (in Steel) - 63 mm
Drilling Capacity (in Cast Iron) - 75 mm
Arm Length - 1460 mm
Spindle Taper - MT 5
Spindle Feed Travel - 400 mm
Spindle Speeds - 14 rpm to 1800 rpm
Vertical Travel of Arm - 840 mm
Feed Rates Spindle Travel - 0.025 mm/rev to 1.25 mm/rev
Table Size - 700 mm x 530 mm
Spindle Diameter - 85 mm
Max. Height between Top of Base to Spindle - 1590 mm
Clamping Type - Automatic ; Motorised.
- Complete with Coolant Pump and Vice.
- Machine is in excellent working condition.

Product Details:

GSP (France) make Radial Drilling Machine in excellent working condition. The model of the machine is 44K16 and the Drilling Capacity of the machine is 50 mm and the Arm Length is 1700 mm. The technical details of the machine is as follows -

Make - GSP (France)
Model - 44K16
Drilling Capacity - 50 mm
Spindle Diameter - 95 mm
Arm Length - 1700 mm
Spindle Taper - MT 4
Spindle Speeds - 40 rpm to 1800 rpm
Spindle Feed Travel - 330 mm
Spindle Feed Travel Rates - 0.05 mm/rev to 0.50 mm/rev
Vertical Travel of Arm - 820 mm
Clamping Type - Manual
- Machine is in excellent working condition.

Product Details:

USA (Italy) make Universal type Radial Drilling Machine in excellent working condition. It is a Portable type Universal Radial Drill suitable for drilling at any angle and is very easy to set up for all types of regular and angular drilling applications. The Drilling Capacity in Steel of the machine is 30 mm and both the Head and the Column can be rotated 360 degrees. The technical details are as follows -

Make - USA (Italy)
Model - TUG 30-S
Drilling Capacity (in Steel) - 30 mm
Spindle Diameter - 60 mm
Spindle Feed Travel - 160 mm
Spindle Taper - MT 3
Longitudinal Travel of Head (In/Out) - 400 mm
Vertical Travel of Arm (Up/Down) - 980 mm
Spindle Speeds - 24 rpm to 2500 rpm
Table Size - 660 mm x 500 mm
Max. Height between Table To Spindle - 980 mm
Spindle Feed Travel Rates - 0.07 - 0.13 - 0.26 mm/revolution
Travel of Column on the Base - 600 mm
Head Rotation - 360 degrees
Column Rotation - 360 degrees
Indexing Positions in Head Rotation - Every 90 degrees
- Machine is in excellent working condition.

Product Details:

Kolb (Germany) make Heavy Duty Radial Drilling Machine in excellent working condition. The Drilling Capacity of the Machine is 100 mm and it is an extra Height type Radial Drilling Machine. The maximum Height between the top of the Base to the Spindle is 1670 mm. The technical details are as follows -

Make - Kolb (Germany)
Model - HK-61
Drilling Capacity - 100 mm
Arm Length - 1320 mm
Spindle Taper - MT 5
Spindle Feed Travel - 480 mm
Spindle Speeds - 24 rpm to 2400 rpm
Vertical Travel of Arm - 1000 mm
Feed Rates Spindle Travel - 0.07 mm/rev to 3.00 mm/rev
Table Size - 605 mm x 505 mm
Spindle Diameter - 95 mm
Max. Height between Base to Spindle - 1670 mm
Clamping Type - Automatic ; Motorised.
- Machine is in excellent working condition.

Product Details:

Radial Drilling Machine made by MAS (Czech Republic) in excellent working condition. The model of the machine is VR 4 and the Drilling Capacity of this machine is 50 mm. The technical details are as follows -

Make - MAS (Czech Republic)
Model - VR 4
Drilling Capacity - 50 mm
Spindle Diameter - 75 mm
Arm Length - 1470 mm
Spindle Speeds - 45 rpm to 2000 rpm
Spindle Taper - MT 4
Spindle Feed Travel - 310 mm
Spindle Feed Rate of Travel - 0.025 mm/rev to 1.58 mm/rev
Vertical Travel of Arm - 680 mm
Table Size - 555 mm x 560 mm
Clamping Type - Manual
- Machine is in excellent working condition.

Product Details:

MAS (Czech Republic) make Radial Drilling Machine in excellent working condition. The Drilling Capacity of the Machine is 50 mm and the Arm Length is 1470 mm. The technical details are as follows -

Make - MAS (Czech Republic)
Model - VR 4
Drilling Capacity - 50 mm
Spindle Diameter - 75 mm
Arm Length - 1470 mm
Spindle Speeds - 45 rpm to 2000 rpm
Spindle Taper - MT 4
Spindle Feed Travel - 310 mm
Spindle Feed Rate of Travel - 0.025 mm/rev to 1.58 mm/rev
Vertical Travel of Arm - 680 mm
Table Size - 755 mm x 1020 mm
Clamping Type - Manual
- Machine is in excellent working condition.

Product Details:

Radial Drilling Machine made by MAS (Czech Republic) in excellent working condition. The model of the machine is VR 2 and the Drilling Capacity is 35 mm. The machine is complete with its cube table. The technical details of the machine is as follows -

Make - MAS (Czech Republic)
Model - VR 2
Drilling Capacity - 35 mm
Spindle Diameter - 60 mm
Arm Length - 1000 mm
Spindle Taper - MT 3
Spindle Speeds - 90 rpm to 4500 rpm
Spindle Feed Travel - 220 mm
Spindle Feed Travel Rates - 0.03 mm/rev to 0.30 mm/rev
Vertical Travel of Arm - 515 mm
Table Size - 550 mm x 550 mm
Clamping Type - Manual
- Machine is in excellent working condition.

Product Details:

Heavy Duty Radial Drilling Machine made by Csepel (Hungary) in excellent working condition. The model of the machine is RFH 75/2000 and the Drilling Capacity in Steel is 75 mm and in Cast Iron is 90 mm. The technical details are as follows -

Make - Csepel (Hungary)
Model - RFH 75/2000
Drilling Capacity in Steel - 75 mm
Drilling Capacity in Cast Iron - 90 mm
Spindle Diameter - 95 mm
Arm Length - 2200 mm
Spindle Taper - MT 5
Spindle Feed Travel - 380 mm
Spindle Speeds - 19 rpm to 1900 rpm
Vertical Travel of Arm - 1020 mm
Feed Travel Rates - 0.047 mm/rev to 2.00 mm/rev
Table Size - 1010 mm x 755 mm
Max. Height between Base to Spindle - 1750 mm
Clamping Type - Hydraulic
- Machine is in excellent working condition.

Product Details:

Caser (Italy) make Heavy Duty Radial Drilling Machine in excellent working condition. The model of the Machine is F. 60 and the Drilling Capacity in Steel is 76 mm. The machine is complete with its Cube Table and Vice. The technical details are as follows -

Make - Caser (Italy)
Model - F. 60
Drilling Capacity (in Steel) - 76 mm
Spindle Diameter - 90 mm
Arm Length - 1700 mm
Spindle Speeds - 29 rpm to 1700 rpm
Spindle Taper - MT 5
Max. Spindle Feed Travel - 400 mm
Spindle Feed Travel Rates - 0.075 mm/rev to 1.00 mm/rev
Vertical Travel of the Arm - 770 mm
Table Size - 800 mm x 640 mm
Clamping Type - Hydraulic
- Machine is in excellent working condition.

Product Details:

Mecof (Italy) make Radial Drilling Machine in excellent working condition. The Drilling Capacity of the machine is 30 mm and the Spindle Diameter is 74 mm. The machine is complete with its Table and Vice. The technical details are as follows -

Make - Mecof (Italy)
Model - 25 PR
Drilling Capacity - 30 mm
Spindle Diameter - 74 mm
Arm Length - 835 mm
Spindle Speeds - 30 rpm to 1400 rpm
Spindle Taper - MT 4
Max. Spindle Feed Travel - 250 mm
Spindle Feed Travel Rates - 0.05 mm/rev to 0.35 mm/rev
Vertical Travel of the Arm - 550 mm
Table Size - 650 mm x 410 mm
Clamping Type - Manual
- Machine is in excellent working condition.

Product Details:

Maut (Italy) make Radial Drilling Machine in excellent working condition. The Drilling Capacity of the machine is 50 mm and the Arm Length is 1325 mm. The machine has Hydraulic Clamping of Drilling Head and of the Arm. The technical details are as follows -

Make - Maut (Italy)
Drilling Capacity - 50 mm
Spindle Diameter - 80 mm
Arm Length - 1325 mm
Spindle Speeds - 43 rpm to 1100 rpm
Spindle Taper - MT 4
Spindle Feed Travel - 270 mm
Spindle Feed Travel Rates - 0.05 mm/rev to 0.35 mm/rev
Vertical Travel of Arm - 630 mm
Table Size - 655 mm x 450 mm
Clamping - Hydraulic + Manual
- Complete with Coolant Tank and Pump.
- Machine is in excellent working condition.

Product Details:

Asquith (England) make Heavy Duty Radial Drilling Machine in excellent working condition. The model of the Machine is ODI Mk2 and the Drilling Capacity is 75 mm. The machine has Hydraulic Clamping of the Arm and Drilling Head. The technical details are as follows -

Make - Asquith (England)
Model - ODI Mk2
Drilling Capacity - 75 mm
Spindle Diameter - 83 mm
Arm Length - 1350 mm
Spindle Speeds - 22 rpm to 1000 rpm
Spindle Taper - MT 5
Max. Spindle Feed Travel - 360 mm
Spindle Feed Travel Rates - 0.051 mm/rev to 1.016 mm/rev
Vertical Travel of the Arm - 630 mm
Table Size - 910 mm x 760 mm
Clamping Type - Hydraulic
- Equipped with an emergency Spindle Brake.
- Electrical Drawings of the Machine are available.
- Equipped with Coolant Pump.
- Machine is in excellent working condition.

Product Details:

Radial Drilling Machine made by MAS (Czech Republic) in excellent working condition. The model of the machine is VR 4 and the Drilling Capacity of the Machine is 50 mm. The technical details are as follows -

Make - MAS (Czech Republic)
Model - VR 4
Drilling Capacity - 50 mm
Spindle Diameter - 75 mm
Arm Length - 1470 mm
Spindle Speeds - 45 rpm to 2000 rpm
Spindle Taper - MT 4
Spindle Feed Travel - 310 mm
Spindle Feed Rate of Travel - 0.025 mm/rev to 1.58 mm/rev
Vertical Travel of Arm - 680 mm
Table Size - 560 mm x 555 mm
Clamping Type - Manual
- Complete with Coolant Tank and Pump.
- Machine is in excellent working condition.

Product Details:

Csepel (Hungary) make Radial Drilling Machine in excellent working condition. The model of the machine is RF 22/B and the Drilling Capacity is 60 mm. The machine is complete with its Cube Table and has Automatic Hydraulic Clamping of the Drilling Head and the Arm. The technical details are as follows -

Make - Csepel (Hungary)
Model - RF 22/B
Drilling Capacity - 60 mm
Spindle Diameter - 78 mm
Arm Length - 1670 mm
Spindle Speeds - 45 rpm to 2000 rpm
Spindle Taper - MT 5
Spindle Feed Rates of Travel - 0.05 mm/rev to 1.25 mm/rev
Spindle Feed Travel - 300 mm
Vertical Travel of Arm - 800 mm
Table Size - 745 mm x 550 mm
Clamping Type - Automatic ; Hydraulic.
- Machine is in excellent working condition.

Product Details:

Kikinda (Yugoslavia) make Radial Drilling Machine in excellent working condition. The model of the machine is RB-40 and the Drilling Capacity is 40 mm. The machine is complete with its Cube Table of Size 650 mm x 560 mm. The technical details are as follows -

Make - Kikinda (Yugoslavia)
Model - RB-40
Drilling Capacity - 40 mm
Spindle Diameter - 70 mm
Arm Length - 1100 mm
Spindle Speeds - 55 rpm to 2558 rpm
Spindle Taper - MT 4
Spindle Feed Travel - 250 mm
Spindle Feed Rates of Travel - 0.05 mm/rev to 0.50 mm/rev
Vertical Travel of Arm - 610 mm
Table Size - 650 mm x 560 mm
Clamping Type - Manual
- Machine is in excellent working condition.

Product Details:

MAS (Czech Republic) make Portable Universal Radial Arm Drilling Machine in excellent working condition. It is a Heavy Duty Radial Drill Machine in which the spindle can be rotated on both the Horizontal and Vertical Axis. The technical details are as follows -

Make - MAS (Czech Republic)
Model - VRM50A
Drilling Capacity - 65 mm
Spindle Diameter - 80 mm
Cross-Rail Horizontal Travel (Longitudinal) - 900 mm
Vertical Travel of the Arm - 1250 mm
Travel of Column on the Base - 1225 mm
Max. Distance between Spindle Center to Vertical Column - 2050 mm
Max. Height between Spindle to Floor - 1570 mm
Spindle Taper - MT 5
Spindle Feed Travel - 350 mm
Spindle Rotation on Vertical Axis - 180 degree to -180 degree
Spindle Rotation on Horizontal Axis - 105 degree to -105 degree
Spindle Speeds - 16 rpm to 800 rpm
Spindle Feed Rates - 0.05 mm/rev to 0.50 mm/rev
Column Rotation - 360 degree
- It is a 7-Axis Universal Radial Arm type Drilling Machine.
- Electrical Drawings of the Machine is available.
- Machine is in excellent working condition.

Product Details:

MAS (Czech Republic) make Radial Drilling Machine in excellent working condition. The model of the machine is VR 4 and the Drilling Capacity of the Machine is 50 mm. The machine is complete with a Tilting type Cube Table and Coolant Pump. The technical details are as follows -

Make - MAS (Czech Republic)
Model - VR 4
Drilling Capacity - 50 mm
Spindle Diameter - 75 mm
Arm Length - 1470 mm
Spindle Speeds - 45 rpm to 2000 rpm
Spindle Taper - MT 4
Spindle Feed Travel - 310 mm
Spindle Feed Rate of Travel - 0.025 mm/rev to 1.58 mm/rev
Vertical Travel of Arm - 680 mm
Tilting Cube Table Size - 550 mm x 550 mm
Tilting Angle of Cube Table - 0 to 90 Degree
Clamping Type - Manual
- Complete with Coolant Tank and Pump.
- Machine is in excellent working condition.

Product Details:

Radial Drilling Machine made by Mossier (Italy) in excellent working condition. The Drilling Capacity of the machine is 50 mm and the Arm Length is 1470 mm. The Spindle Taper in this machine is MT-4 and the Spindle Diameter is 82 mm. The machine is complete with its Cube Table, Coolant Pump and Tank. The technical details are as follows -

Make - Mossier (Italy)
Drilling Capacity - 50 mm
Spindle Diameter - 82 mm
Arm Length - 1470 mm
Spindle Speeds - 45 rpm to 1980 rpm
Spindle Taper - MT-4
Spindle Feed Travel - 300 mm
Spindle Feed Rate of Travel - 0.05 mm/rev to 0.30 mm/rev
Vertical Travel of Arm - 800 mm
Table Size - 745 mm x 505 mm
Clamping Type for Arm - Motorised Automatic
Clamping Type for Drilling Head - Manual
- Machine is in excellent working condition.

Product Details:

Caser (Italy) make Heavy Duty Radial Drilling Machine in excellent working condition. The model of the Machine is F. 80 and the Drilling Capacity in Steel is 100 mm. The machine is complete with lots of accessories and also with its Cube Table. It also has a feature of Motorised Left & Right Travels of the Drilling Head. The technical details are as follows -

Make - Caser (Italy)
Model - F. 80
Drilling Capacity (in Steel) - 100 mm
Spindle Diameter - 110 mm
Arm Length - 2600 mm
Spindle Speeds - 25 rpm to 1670 rpm
Spindle Taper - MT 5
Max. Spindle Feed Travel - 495 mm
Spindle Feed Travel Rates - 0.075 mm/rev to 1.00 mm/rev
Vertical Travel of the Arm - 860 mm
Table Size - 750 mm x 600 mm
Machine Weight - 11.7 Tons (Approximately)
Clamping Type - Hydraulic
- Feature of Motorised Left & Right Travels of the Drilling Head.
- With lots of Accessories like Quick Change Tool Adapter, Tapping Adapter etc.
- Machine is in excellent working condition.

Product Details:

Breda (Italy) make Radial Drilling Machine in excellent working condition. The model of the Machine is R1200L and the Drilling Capacity of the machine is 40 mm. The technical details are as follows -

Make - Breda (Italy)
Model - R1200L
Drilling Capacity - 40 mm
Spindle Diameter - 60 mm
Arm Length - 1330 mm
Spindle Speeds - 40 rpm to 1350 rpm
Spindle Taper - MT 4
Max. Spindle Feed Travel - 175 mm
Spindle Feed Travel Rates - 0.10 mm/rev to 0.30 mm/rev
Vertical Travel of the Arm - 535 mm
Table Size - 450 mm x 320 mm
Clamping Type - Manual.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Radial Drilling Machine in excellent working condition. The model of the machine is VR-4 and the Drilling Capacity of the Machine is 50 mm. The machine is complete with a Tilting type Cube Table as well. The technical details are as follows -

Make - TOS (Czech Republic)
Model - VR-4
Drilling Capacity - 50 mm
Spindle Diameter - 75 mm
Arm Length - 1470 mm
Spindle Speeds - 45 rpm to 2000 rpm
Spindle Taper - MT 4
Spindle Feed Travel - 310 mm
Spindle Feed Rate of Travel - 0.025 mm/rev to 1.58 mm/rev
Vertical Travel of Arm - 680 mm
Tilting Cube Table Size - 550 mm x 550 mm
Tilting Angle of Cube Table - 0 to 90 degree
Clamping Type - Manual
- Machine is in excellent working condition.

Product Details:

MAS (Czech Republic) make Radial Drilling & Tapping Machine in excellent working condition. The model of the machine is VO-50 and the Drilling Capacity is 60 mm. The Spindle Taper is MT-5 and Arm Length is 1750 mm. The machine is complete with a Tilting type Cube Table. The technical details are as follows -

Make - MAS (Czech Republic)
Model - VO-50
Drilling Capacity - 60 mm
Spindle Diameter - 85 mm
Arm Length - 1750 mm
Spindle Speeds - 28 rpm to 2500 rpm
Spindle Taper - MT 5
Spindle Feed Travel - 310 mm
Spindle Feed Rate of Travel - 0.05 mm/rev to 2.00 mm/rev
Vertical Travel of Arm - 875 mm
Max. Height between Spindle to Top of Base - 1500 mm
Table Size - 550 mm x 555 mm
Tilting Angle of Table - 0 degree to 90 degree
Clamping Type - Hydraulic
- Feature of Automatic Tapping.
- Complete with Coolant Tank and Pump.
- Electrical Drawings & Operating Manual is available.
- Machine is in excellent working condition.

Product Details:

Kolb (Germany) make Radial Drilling Machine in excellent working condition. The Drilling Capacity of the Machine is 40 mm and the Arm Length is 1050 mm. The technical details are as follows -

Make - Kolb (Germany)
Drilling Capacity - 40 mm
Spindle Diameter - 66 mm
Arm Length - 1050 mm
Spindle Speeds - 60 rpm to 2550 rpm
Spindle Taper - MT 4
Max. Spindle Feed Travel - 220 mm
Spindle Feed Travel Rates - 0.12 mm/rev to 0.32 mm/rev
Vertical Travel of the Arm - 510 mm
Tilting-Type Table Size - 755 mm x 610 mm
Tilting Angle of Table - 0 degree to 90 degree
Clamping Type - Manual.
- Machine is in excellent working condition.

Product Details:

Infratirea (Romania) make Radial Drilling Machine in excellent working condition. The model of the machine is GR-616H and the Drilling Capacity of the machine is 75 mm with a Spindle Taper of MT-5 and Arm Length of 1720 mm. The technical details are as follows -

Make - Infratirea (Romania)
Model - GR-616H
Drilling Capacity - 75 mm
Spindle Diameter - 95 mm
Arm Length - 1720 mm
Spindle Speeds - 36 rpm to 1600 rpm
Spindle Taper - MT 5
Spindle Feed Travel - 315 mm
Spindle Feed Rate of Travel - 0.04 mm/rev to 0.63 mm/rev
Vertical Travel of Arm - 750 mm
Max. Height between Spindle to Top of Base - 1425 mm
Table Size - 800 mm x 600 mm
Clamping Type - Hydraulic
- Machine is in excellent working condition.

Product Details:

MAS (Czech Republic) make Radial Drilling Machine in excellent working condition. The model of the machine is VR-2 and the Drilling Capacity is 35 mm. The machine has a Maximum Spindle Speed of 4,500 rpm and is complete with its Cube Table & Clamping Vice. The technical details of the machine is as follows -

Make - MAS (Czech Republic)
Model - VR-2
Drilling Capacity - 35 mm
Spindle Diameter - 60 mm
Arm Length - 1000 mm
Spindle Taper - MT 3
Spindle Speeds - 90 rpm to 4500 rpm
Spindle Feed Travel - 230 mm
Spindle Feed Travel Rates - 0.03 mm/rev to 0.30 mm/rev
Vertical Travel of Arm - 515 mm
Table Size - 550 mm x 400 mm
Clamping Type - Manual
- Machine is in excellent working condition.

Product Details:

MAS (Czech Republic) make Portable Universal Radial Arm Drilling Machine in excellent working condition. It is a Heavy Duty Universal Radial Drill Machine in which the Drilling Head can be rotated on both the Horizontal and Vertical Axis. The technical details are as follows -

Make - MAS (Czech Republic)
Model - VRM50A
Drilling Capacity - 65 mm
Spindle Diameter - 80 mm
Cross-Rail Horizontal Travel (Longitudinal) - 900 mm
Vertical Travel of the Arm - 1250 mm
Travel of Column on the Base - 1225 mm
Max. Distance between Spindle Center to Vertical Column - 2050 mm
Max. Height between Spindle to Floor - 2020 mm
Spindle Taper - MT-5
Spindle Feed Travel - 350 mm
Spindle Rotation on Vertical Axis - 180 degree to -180 degree
Spindle Rotation on Horizontal Axis - 105 degree to -105 degree
Spindle Speeds - 16 rpm to 800 rpm
Spindle Feed Rates - 0.05 mm/rev to 0.50 mm/rev
Column Rotation - 360 degree
Weight of the Machine - 6.90 Tons (Approximately)
- It is a 7-Axis Universal Radial Arm type Drilling Machine.
- Complete with Coolant Tank and Pump.
- Machine is in excellent working condition.

Product Details:

Radial Drilling Machine made by MAS (Czech Republic) in excellent working condition. The model of the machine is VR-2 and the Drilling Capacity is 35 mm. The machine has a Maximum Spindle Speed of 4,500 rpm and is complete with its Cube Table & Clamping Vice. The technical details of the machine is as follows -

Make - MAS (Czech Republic)
Model - VR-2
Drilling Capacity - 35 mm
Spindle Diameter - 60 mm
Arm Length - 1000 mm
Spindle Taper - MT 3
Spindle Speeds - 90 rpm to 4500 rpm
Spindle Feed Travel - 230 mm
Spindle Feed Travel Rates - 0.03 mm/rev to 0.30 mm/rev
Vertical Travel of Arm - 515 mm
Table Size - 555 mm x 555 mm
Clamping Type - Manual
- Machine is in excellent working condition.

Product Details:

Automatic Turret Drilling Machine made by Meca (Spain) in excellent working condition. The Drilling Capacity is 16 mm and it is equipped with a 6-station Auto-Indexing Capstan head. The machine is suitable for operations like spot drilling, spot facing, counter-boring, countersinking and reaming, etc. The technical details are as follows -

Make - Meca (Spain)
Drilling Capacity - 16 mm
Max. Feed Length - 150 mm
Spindle Speed Range - 275 rpm to 4,010 rpm
Clamping Table Size - 350 mm x 300 mm
Base Plate Size - 445 mm x 315 mm
Distance between Spindle Center to Vertical Column - 230 mm
Max. Distance between Spindle Nose to Table Top - 430 mm
- Automatic Indexing 6-Station Turret Head.
- Complete with Coolant Pump and Tank.
- Machine is in excellent working condition.

Product Details:

Heavy Duty Pillar Drilling Machine made by Ibarmia (Spain) in excellent working condition. It is an All-Geared type machine having Automatic Feed Travels and having a Drilling Capacity of 50 mm. It is also possible to do Taper Drilling in this machine as the Table can be Tilted from +90 degree to -90 degree. The machine is also complete with its Coolant Tank and Pump. The technical details are as follows -

Make - Ibarmia (Spain)
Model - 50-CA
Capacity - 50 mm
Spindle Diameter - 88 mm
Spindle Taper - MT-4
Spindle Feed Travel - 260 mm
Spindle Speeds - 58 rpm to 1098 rpm
Spindle Feed Travel Rates - 0.1 mm/rev to 0.3 mm/rev
Table Size - 570 mm x 570 mm
Distance between Spindle Center to Vertical Pillar - 425 mm
Max. Height between Spindle to Table Top - 675 mm
Max. Height between Spindle to Base Top - 1170 mm
Vertical Pillar Diameter - 200 mm
Table Tilting Angle - +90 degree to -90 degree
- Complete with Coolant Pump.
- Taper Drilling is possible as Table is Tilting type.
- Machine is in excellent working condition.

Product Details:

Alzmetall (Germany) make Automatic Feed type Pillar type Drilling Machine in excellent working condition. The Drilling Capacity of the machine is 40 mm and Spindle Diameter is 78 mm. The technical details are as follows -

Make - Alzmetall (Germany)
Model - AB4SV
Capacity - 40 mm
Spindle Diameter - 78 mm
Spindle Taper - MT-4
Spindle Feed Travel - 170 mm
Spindle Speeds - 60 rpm to 765 rpm (Continuously Variable)
Spindle Feed Travel Rates - 0.15 mm/rev to 0.25 mm/rev
Table Size - 605 mm x 455 mm
Base Clamping Size - 380 mm x 450 mm
Distance between Spindle Center to Vertical Pillar - 345 mm
Height between Spindle to Top of Base - 1220 mm
Max. Height between Spindle to Table Top - 775 mm
Vertical Pillar Diameter - 160 mm
- Equipped with Coolant Pump.
- Machine is in excellent working condition.

Product Details:

Precis (France) make Pillar Drilling Machine in excellent working condition. The Drilling Capacity of the machine is 15 mm and the Spindle Diameter is 56 mm. The technical details are as follows -

Make - Precis (France)
Capacity - 15 mm
Spindle Diameter - 56 mm
Spindle Speeds - 300 rpm to 5000 rpm
Spindle Travel - 105 mm
Table Size - 325 mm x 350 mm
Spindle Taper - MT 1
Max. Height between Top of Table to Spindle - 555 mm
Vertical Pillar Diameter - 120 mm
Motor Power - 0.55 kW
- Machine is in excellent working condition.

Product Details:

Kitchen-Walker (England) make Heavy Duty Pillar type Drilling Machine in excellent working condition. The model of the machine is V-50 and the Drilling Capacity of the machine is 63 mm. The technical details are as follows -

Make - Kitchen Walker (England)
Model - V-50
Capacity - 63.5 mm
Spindle Diameter - 76 mm
Spindle Taper - MT 4
Spindle Feed Travel - 350 mm
Spindle Speeds - 25 rpm to 1560 rpm
Spindle Feed Travel Rates - 0.089 mm/rev to 1.04 mm/rev
Table Size - 690 mm x 510 mm
Base Clamping Size - 610 mm x 740 mm
Distance between Spindle Center to Vertical Pillar - 405 mm
Height between Spindle to Top of Base - 1185 mm
Max. Height between Spindle to Table Top - 740 mm
Min. Height between Spindle to Table Top - 310 mm
Vertical Pillar Diameter - 254 mm
- Machine is in excellent working condition.

Product Details:

Ibarmia (Spain) make Pillar type All Geared Drilling Machine in excellent working condition. The model of the machine is 50-CA and the Drilling Capacity is 50 mm. It has a Tilting type Table and therefore Taper Drilling is also possible in this machine. The technical details are as follows -

Make - Ibarmia (Spain)
Model - 50-CA
Capacity - 50 mm
Spindle Diameter - 88 mm
Spindle Taper - MT 4
Spindle Feed Travel - 260 mm
Spindle Speeds - 58 rpm to 1098 rpm
Spindle Feed Travel Rates - 0.1 mm/rev to 0.3 mm/rev
Table Size - 570 mm x 570 mm
Distance between Spindle Center to Vertical Pillar - 425 mm
Max. Height between Spindle to Table Top - 700 mm
Max. Height between Spindle to Base Top - 1170 mm
Vertical Pillar Diameter - 200 mm
Table Tilting Angle - +90 degree to -90 degree
- Complete with Coolant Tank and Pump.
- Taper Drilling is possible as Table is Tilting type.
- Machine is in excellent working condition.

Product Details:

Pollard (England) make Heavy Duty Pillar Drilling Machine in excellent working condition. The model of the machine is 250B/1 and the Drilling Capacity is 38 mm. The technical details are as follows -

Make - Pollard (England)
Model - 250B/1
Drilling Capacity - 38 mm
Spindle Diameter - 63 mm
Spindle Feed Travel - 255 mm
Spindle Taper - MT 4
Spindle Speeds - 44 rpm to 1070 rpm
Spindle Feed Rates - 0.10 mm/rev to 0.41 mm/rev
Table Size - 505 mm x 505 mm
Max. Distance between Table Top & Spindle - 750 mm
Motor Power - 4.0 kW
- Equipped with Emergency Brake of Spindle.
- Complete with Coolant Pump, many accessories etc.
- Machine is in excellent working condition.

Product Details:

Pillar Drilling Machine made by Super Condor (Italy) in excellent working condition. The model of the machine is 40-P and the Spindle Diameter is 70 mm. The machine has Automatic Spindle Feed Travels and a Tilting Type Table for Taper Drilling Operations. The machine also has Micro-Feed Travels of the Spindle for precisely controlling the depth. The technical details are as follows -

Make - Super Condor (Italy)
Model - 40-P
Capacity - 40 mm
Spindle Diameter - 70 mm
Spindle Taper - MT 4
Spindle Speeds - 60 rpm to 1350 rpm
Spindle Feed Travel - 150 mm
Spindle Feed Travel Rates - 0.04 mm/rev to 0.16 mm/rev
Table Size - 420 mm x 330 mm
Max. Height between Table to Spindle - 930 mm
Table Tilting Angle - +45 degree to -45 degree
Distance between Spindle Center to Vertical Pillar - 280 mm
- Tilting type Table for Taper Drilling Applications.
- Machine is in excellent working condition.

Product Details:

Ajax (England) make All-Geared Pillar type Drilling Machine in excellent working condition. The Drilling Capacity of the machine is 40 mm and Spindle Diameter is 75 mm. The technical details are as follows -

Make - Ajax (England/Bulgaria)
Capacity - 40 mm
Spindle Diameter - 75 mm
Spindle Taper - MT 4
Spindle Feed Travel - 255 mm
Spindle Speeds - 56 rpm to 1000 rpm
Spindle Feed Travel Rates - 0.10 mm/rev to 0.25 mm/rev
Table Size - 400 mm x 400 mm
Base Clamping Size - 565 mm x 445 mm
Distance between Spindle Center to Vertical Pillar - 320 mm
Height between Spindle to Top of Base - 1185 mm
Max. Height between Spindle to Table Top - 715 mm
Min. Height between Spindle to Table Top - 70 mm
Vertical Pillar Diameter - 152 mm
- Equipped with Coolant Pump.
- Machine is in excellent working condition.