Gear Hobbing Machine

Product Details:

Cima (Italy) make Gear Hobbing Machine in excellent working condition. The model of the Machine is P3 and the Max. Gear Diameter with Tail-Stock is 150 mm and the Max. Module Capacity is 3 Module. The technical details are as follows -

Make - Cima (Italy)
Model - P3
Max. Module - 3 Module
Max. Gear Diameter - 155 mm (with Tail-Stock)
Vertical Travel of Hobbing Head - 200 mm
Max. Hob Cutter Diameter - 80 mm
Table Diameter - 150 mm
Max. Distance between Table Top & Center - 390 mm
- Rapid Motorised Travels on Vertical & Table Travel.
- Complete with Change Gears, Mandrels & other accessories.
- Operating Manual of the Machine is available.
- Machine is in excellent working condition.

Product Details:

Pfauter (Germany) make Hydraulic Gear Hobbing Machine in excellent working condition. The model of the Machine is P251 and the Capacity is 6 Module and 250 mm Gear Diameter. It is a High-Production Auto-Cycle machine which is fitted with PLC control and complete with lots of accessories like Change Gears, Arbours, Mandrels etc. The technical details are as follows -

Make - Pfauter (Germany)
Model - P251
Max. Module - 6 Module
Max. Gear Diameter - 250 mm
Max. Width of Gear - 242 mm
Table Diameter - 250 mm
Max. Hob Cutter Diameter - 130 mm
- Equipped with PLC control and HMI.
- With Change Gears, Hob Arbours and Mandrels.
- With lots of other accessories, fixtures, coolant pump, tank etc.
- Operating Manual, Ladder Logic & Electrical Drawings available.
- It is a High-Production and Auto-Cycle Machine.
- Machine is in excellent working condition.

Product Details:

Cima (Italy) make Gear Hobbing Machine in excellent working condition. The model of the Machine is P4 and Max. Gear Diameter is 400 mm and the Max. Module Capacity is 4 Modules. The technical details are as follows -

Make - Cima (Italy)
Model - P4
Max. Module - 4 Modules
Max. Gear Diameter (With Tail-Stock) - 400 mm
Table Diameter - 450 mm
Vertical Travel of Hobbing Head - 260 mm
Job Clamping Length (from Table Top) - 500 mm
Max. Hob Diameter - 110 mm
Hob Rotation Speeds - 50 rpm to 212 rpm
- Motorised Rapid Travels in Vertical & Table Travels.
- Equipped with DRO.
- Complete with Change Gears, Mandrels etc.
- Machine is in excellent working condition.

Product Details:

Heavy Duty Gear Hobbing Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is OF 71 and the Max. Gear Diameter is 710 mm. The machine can work in Manual as well as in complete Auto Cycle Mode. The Max. Module capacity of the machine is 7 modules and it is equipped with a Hydraulic Tail-stock. The technical details are as follows -

Make - TOS (Czech Republic)
Model - OF 71
Module Capacity - 7 Modules
Max. Gear Diameter - 710 mm
Max. Width of Gear - 335 mm
Table Diameter - 630 mm
Number of Teeth - 8 to 300
Max. Dimensions of Hob Cutter - Diameter 195 mm x 220 mm Length
Max. Gear Diameter (with Support) - 500 mm
Hob Speeds - 40 rpm to 315 rpm
Weight of Machine - 7 Tons Approx.
- Features like Automatic Hob Shifting, Hydraulic Tail-Stock etc.
- Can work in Manual as well as in Auto-Cycle mode.
- Machine is complete with Change Gears etc.
- Operating Manual, Electrical Drawings etc. are available.
- Machine is in excellent working condition.

Product Details:

Donini (Italy) make Automatic Gear Hobbing Machine in excellent working condition. The model of the Machine is A29 and the Maximum Module Capacity is 3.5 Module. It is a Fully Automatic Machine which can work in complete Auto-Cycle Mode as well as in Manual Mode. The technical details are as follows -

Make - Donini (Italy)
Model - A29
Max. Module Capacity - 3.5 Module
Max. Gear Diameter - 290 mm
Vertical Travel of Hob-Slide - 200 mm
Table Diameter - 200 mm
Max. Hob Diameter - 80 mm
Max. Hob Length - 80 mm
Hob Speeds - 60 rpm to 270 rpm
Number of Teeth - 6 to 400
- Working in Complete Auto-Cycle Mode and in Manual Mode.
- Complete with Change Gears, Arbours, Mandrels, Hob Cutters etc.
- Operating Manual and Electrical Drawings are available.
- Machine is in excellent working condition.

Product Details:

Mikron (Switzerland) make Precision Horizontal Gear Hobbing Machine in excellent working condition.The model of the machine is 132.02 and the Max. Module capacity is 1.75 module. It is an Auto-Cycle type precision hobbing machine complete with change gears and other accessories. The technical details are as follows -


Make - Mikron (Switzerland)
Model - 132.02
Max. Gear Diameter - 100 mm
Max. Module Capacity - 1.75 module
Max. Length of Job - 100 mm
Pitch - 6 to 400
Hob Cutter Speeds - 200 rpm to 2400 rpm
- Auto-Cycle Operation.
- Complete with lots of Change Gears, Collets & Spare Tail-Stocks.
- Equipped with a Hydraulic operated Cutter.
- Complete with Coolant Tank & Pump.
- Machine is in excellent working condition.

Product Details:

Details:

• It is an automatic cycle type High-Production machine.
• Complete with Change Gears & lots of accessories etc.
• Machine complete with operating manual & electrical
• drawings etc.
• Machine is in excellent working condition

Product Details:

Make - TOS (Czech Republic)
Model - FO6
Max. Module - 6 module
Max. Diameter of Gear (with tail-stock) - 600 mm
Table Diameter - 420 mm
- Complete with 8 pcs x Job Supports (Shoes), Table Supports etc.- With lots of spare mand
rels, arbours, other accessories, etc.
- Machine is complete with change gears.
- Machine is in excellent working condition

Product Details:

Lambert (Switzerland) make Gear Hobbing Machine in excellent working condition. The model of the machine is No. 68 and the Max. Module Capacity is 2.5 modules. The technical details are as follows -

Make - Lambert (Switzerland)
Model - No. 68
Max. Gear Diameter - 200 mm
Max. Module - 2.5 module
Max. Travel of Vertical Slide - 175 mm
Number of Teeth Cut - 4 to 600
Hob Speeds - 75 rpm to 470 rpm
- Complete with Change Gears.
- Operating Manual of the Machine is available.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make FO-6 Gear Hobbing Machine in excellent working condition. The module capacity of the machine is 6 modules and the maximum Gear Diameter is 600 mm.The technical details are as follows -

Make - TOS (Czech Republic)
Model - FO-6
Max. Module - 6 module
Max. Diameter of Gear (with tail-stock) - 600 mm
Table Diameter - 420 mm
Vertical Travel of Hob Slide - 350 mm
- Complete with change gears and accessories.
- Complete with it's electrical drawings & operating manual.
- Machine is in excellent working condition.

Product Details:

Staehely (Germany) make Mechanical Gear Hobbing Machine in excellent working condition. The model of the machine is SRF-I and Max. Capacity is 5 module. The technical details are as follows -

Make - Staehely (Germany)
Model - SRF-I
Max. Module - 5 module
Max. Job Diameter (with Support) - 440 mm
Max. Width of Gear - 275 mm
Table Diameter - 425 mm
- With Lots of spare Hob Cutters, Arbours, etc.
- Complete with Mandrels, Change Gears etc.
- Machine is in excellent working condition.

Product Details:

Cima (Italy) make Mechanical Gear Hobbing Machine in excellent working condition.The model of the machine is P3 and the Max. Module is 2.5 module and Max. Gear Diameter is 155 mm. The technical details are as follows -


Make - Cima (Italy)
Model - P3
Max. Module - 2.5 module
Max. Gear Diameter (with Tail-Stock) - 155 mm
Max. Hob Cutter Diameter - 80 mm
Vertical Travel of Hobbing Head - 180 mm
- Motorised Rapid Travels on Hobbing Head & Table.
- Complete with Change Gears, Mandrels etc.
- Operating Manual of the machine is available.
- Machine is in excellent working condition.

Product Details:

CIMA (Italy) make Hydraulic Gear Hobbing Machine in excellent working condition. The Max. Gear Diameter is 250 mm and the Max. Module Capacity is 6 modules. It is an Auto-Cycle type High-Production Gear Hobbing Machine. The technical details are as follows -

Make - CIMA (Italy)
Model - P4-AU
Max. Gear Diameter - 250 mm
Max. Module in 100 mm Dia. Gear - 6 module
Max. Module in 250 mm Dia. Gear - 4 module
Max. Width of Gear - 220 mm
Min/Max. Number of Gear Teeth - 4 to 272
Max. Helical Angle - 45 Degree
Max. Hob Size - Diameter 120 mm x 120 mm Length
Hob Shifting - 75 mm
Hob Rotation Speeds - 70 rpm to 476 rpm
Type - Hydraulic ; Auto-Cycle High Production.
- Complete with Change Gears, Arbours etc.
- Complete with operating manual & electrical drawings etc.
- Machine is in excellent working condition.

Product Details:

Details:

• Complete with change gears and accessories.
• Complete with it's electrical drawings & operating manual.
• Machine is in excellent working condition.

Product Details:

Make - Liebherr (Germany)
Model - L300
Max. Module - 6 module
Max. Gear Diameter - 300 mm
Max. Width of Gear - 200 mm
Max. Hob Diameter - 125 mm
Type - Hydraulic ; High-Production.
- Equipped with Drive for Hob Speed Control.
- Complete with change gears (~170 pcs).
- Complete with Coolant pump etc.
- Machine is in excellent working condition.

Product Details:

Make - Koepfer (Germany)
Model - 170
Max. Diameter of Gear - 130 mm
Max. Module - 2.5 module
Max. Length of Job - 150 mm
Max. Hob Diameter - 63 mm
Max. Hob Length - 31 mm
Arbour Diameter - 13 mm / 16 mm
- Motorized Automatic Center.
- Complete Auto-Cycle Operation for High-Production.
- Complete with it's Operating Manual & some spare Hob Cutters.
- Machine is in excellent working condition.

Product Details:

Details:

• With Rapid Travels in Table Travel (Horizontal) & Hob-Slide Travel (Vertical).
• Machine is complete with it's Change Gears etc.
• Machine is in excellent working condition.

Product Details:

Make - Koepfer (Germany)
Model - 170
Max. Diameter of Gear - 130 mm
Max. Module - 2.5 module
Max. Length of Job - 150 mm
Max. Hob Diameter - 63 mm
Max. Hob Length - 31 mm
Arbour Diameter - 13 mm / 16 mm
- Motorized Automatic Center.
- Complete Auto-Cycle Operation for High-Production.
- Complete with it's Operating Manual & some spare Hob
Cutters.
- Machine is in excellent working condition.

Product Details:

Make - David Brown (England)
Model - Hydrax 10 Hyd
Max. Module - 8 module
Max. Job Diameter - 250 mm
Max. Width of Gear - 125 mm
Max. Length of Job - 350 mm
Hob Shifting - 100 mm
Swivel Angle of Cutter Head - +12Degree to -12Degree
Hob Rotation Speeds - 109 rpm to 575 rpm
Swivel Angle of Head - +60Degree to -60Degree
Weight of the Machine - 5.3 tons (approximately)
- Hydraulic Rapid Forward/Backward Movement of Hob Cutter Head.
- Hydraulic Job Clamping in Work-Head and Hydraulic Tail-Stock.
- Complete with Change Gears, Accessories etc.
- Machine is in excellent working condition.

Product Details:

Make - Pfauter (Germany)
Model - P900
Max. Module - 10 module
Max. Diameter of the Gear - 900 mm
Max. Axial Slide Travel - 575 mm
Table Diameter - 700 mm
Max. Hob Dimensions - 305 mm Dia. x 330 mm Length
Hob Shifting - 150 mm
Weight of Machine - 9.0 tons (approx.)
- Machine is complete with change gears, operating manual, etc.
 -Machine is in excellent working condition.

Product Details:

Details:

• Equipped with pneumatic center.
• Auto-Cycle Operation.
• With complete set of change gears, arbours, centers etc.
• Operation Manual, Electrical drawings etc. available.
• Machine is in excellent working condition.

Product Details:

Make - TOS (Czech Republic)
Model - FO6
Max. Module - 6 module
Max. Diameter of Gear (with tail-stock) - 600 mm
Table Diameter - 420 mm
- Machine is complete with change gears, job-supports,
operating manual.  
- Complete with lots of arbours, mandrels, & other accessories.
- Machine is in excellent working condition.

Product Details:

Details:

• Equipped with Siemens Drive for Spindle 
• Equipped with Siemens PLC system. 
• Completely overhauled in 2008. 
• Complete with change gears, arbours etc.
• Complete with Coolant pump etc.  
• Machine is in excellent working condition.

Product Details:

Make - WMW-Modul (Germany)
Model - ZFWZ 500 x 5
Max. Module - 5 module
Max. Diameter of Gear - 500 mm
Max. Width of Gear - 285 mm
Table Diameter - 460 mm
Diameter of Gear (with Tail-stock) - 370 mm
Hob Speed Range - 46 rpm to 216 rpm
Table Bore - 70 mm
- Motorized Rapid Travel of Hob-Carriage & Table.
- Complete with arbours, change gears etc.
- Operating Manual of the machine is available.
- Machine is in excellent working condition.

Product Details:

Details:

• Motorized Rapid Travel of Hob-Carriage & Table.
• Auto-Cycle Feature with automatic return to initial position.
• Complete with lots of change gears etc.
• Operating Manual of the machine is available.
• Machine is in excellent working condition.

Product Details:

Details:

• Machine is complete with change gears etc.
• Equipped with Coolant Pump.
• Machine is in excellent working condition.

Product Details:

Make - Liebherr (Germany)
Model - L400
Max. Diameter of Gear - 400 mm
Max. Module Capacity - 8 module
Max. Width of Gear - 300 mm
Table Diameter - 400 mm
Table Bore Diameter - 100 mm
- Continuously Variable Hob Speeds.
- Auto-Cycle High-Production Machine.
- Complete with Change Gears, Operating Manual etc.
- Machine is in excellent working condition.

Product Details:

Poreba (Poland) make Gear Hobbing Machine in excellent working condition. The model of the machine is ZFA 75 and the Max. Module Capacity is 6 modules. The technical details are as follows -

Make - Poreba (Poland)
Model - ZFA 75
Max. Module - 6 Module
Max. Gear Diameter with Tail-Stock - 500 mm
Max. Gear Diameter without Tail-Stock - 750 mm
Table Diameter - 500 mm
Vertical Travel of Hobbing Head - 310 mm
- Complete with Change Gears etc.
- Machine is in excellent working condition.

Product Details:

Donini (Italy) make Gear Hobbing Machine in excellent working condition. The model of the machine is A103 and the Max. Module Capacity is 12 modules and Max. Gear Diameter is 1000 mm. The technical details are as follows -

Make - Donini (Italy)
Model - A103
Max. Module - 12 Module
Max. Gear Diameter - 1000 mm
Max. Width of Gear - 450 mm
Vertical Travel of Hob-Cutter Slide - 525 mm
Max. Hob Cutter Diameter - 170 mm
Table Diameter - 690 mm
Table Bore - 100 mm
Hob Speeds - 20 rpm to 205 rpm
- Machine is complete with Change Gears & Arbours.
- Machine is complete with its Operating Manual.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Repulic) make Gear Hobbing Machine in excellent working condition. The model of the machine is FO16. The technical details are as follows - 

Make - TOS (Czech Republic)
Model - FO16
Max Module - 16 module
Max. Gear Diameter - 2000 mm
Max. Width of Gear - 560 mm
Table Diameter - 1350 mm
Year of Make - 1994
- Complete with Change Gears, Supports etc.
- Machine is in excellent working condition.

Product Details:

Make - Koepfer (Germany)
Model - 170
Max. Diameter of Gear - 130 mm
Max. Module - 2.5 module
Max. Length of Job - 150 mm
Minimum number of teeth - 6
Max. Cutter Diameter - 63 mm
- Operating Manual, electrical drawing etc. available.
- Machine is in excellent working condition.

Product Details:

Make - WMW-Modul (Germany)
Model - ZFWZ 250/3
Max. Module - 6 module
Max. Gear Diameter - 250 mm
Max. Width of Gear - 275 mm
Hob Shifting - 100 mm
Table Diameter - 275 mm
Hob Speeds Range (Stepless) - 50 rpm to 400 rpm
- Machine complete with many arbours, change gears etc.
- Equipped with Servo-Motors for Longitudinal & Vertical Travels.
- All operating manuals, electrical drawings & other
documentation etc. is available.
- Machine is in excellent working condition.

Product Details:

Details:

• With Milling Head for Outer teeth milling.
• Complete with Tailstock, change gears etc
• Lots of accessories with the machine like arbors, job supports, etc.
• Slides, table etc. of the machine are completely scratch-less.
• Machine is in excellent working condition.
• Machine is an import machine.

Product Details:

Make - TOS (Czech Republic)
Model - FO6
Max. Module - 6 modules
Gear Diameter - 600 mm
- Complete with change gears, a lot of arbours, etc. 
- Machine is in excellent working condition.

Product Details:

Mechanical Gear Hobbing Machine made by TOS (Czech Republic) in excellent working condition. The Maximum Capacity is 6 Modules and the Maximum Gear Diameter with Support is 600 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - FO-6
Max. Module - 6 module
Max. Diameter of Gear (with tail-stock) - 600 mm
Table Diameter - 420 mm
Vertical Travel of Hob Slide - 350 mm
Hob Cutter Speeds - 15 rpm to 190 rpm
- Complete with Change Gears, Arbours & Mandrels etc.
- Complete with its electrical drawings & operating manual.
- Machine is in excellent working condition.