Gear Shapers

Product Details:

Fellows (USA) make Gear Shaping Machine equipped with a Rack Cutting Attachment in excellent working condition. The model of the machine is 6A and the Max. Cutting Length of Rack is 1225 mm. The attachment can also be removed to do Gear Cutting operations. The Max. Stroke Length is 140 mm and the Maximum Gear Diameter is 458 mm. The technical details are as follows -

Make - Fellows (USA)
Model - 6A
Max. Length of Rack Cutting - 1225 mm
Max. Module Capacity - 6.3 Module
Max. Stroke Length - 140 mm
Max. Gear Diameter - 458 mm
Stroke Rates - 50 strokes/min to 300 strokes/min
- Equipped with Heavy Duty type Rack Cutting Attachment.
- Motorised Rapid Travel of the Rack Cutting Attachment.
- Machine is in excellent working condition.

Product Details:

Maag (Switzerland) make Gear Cutting Machine in excellent working condition. The model of the machine is SH 75 and the Max. Gear Diameter is 750 mm. The machine is suitable for cutting spur and helical involute gears. It can also be used for special applications like half-round gears, fluted rollers, and producing teeth where access is difficult and overtravel of the tool is restricted. The technical details are as follows -

Make - Maag (Switzerland)
Model - SH 75
Max. Gear Diameter - 750 mm
Maximum Module - 10 Module
Max. Stroke of Cutter - 225 mm
Max. Gear Width - 200 mm
Stroke Rate - 23.5 strokes/min to 150 strokes/min
Min. / Max. No. of Teeth - 6 to 300
Max. Weight of Job - 800 kg
Minimum Gear Diameter - 30 mm
Table Diameter - 500 mm
- Complete with Change Gears, Coolant Pump, Tank etc.
- Operating Manual of the Machine is available.
- Machine is in excellent working condition.

Product Details:

Gear Shaping Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is OH-6 and it is a 6 Module Machine. The machine is complete with lots of accessories like Cutters, Change Gears, Mandrels, and other accessories. The condition of the machine is excellent and the accuracy is also very good. The technical details are as follows -

Make - TOS (Czech Republic)
Model - OH-6
Max. Module Capacity - 6 Modules
Gear Diameter - 500 mm
Max. Stroke Length - 105 mm
Stroke Rate - 50 strokes/min to 315 strokes/min
- Complete with lots of Cutters & Change Gears.
- With lots of Mandrels, Fixtures and a lot of other accessories.
- Operating Manual & Electrical Drawings are available.
- Machine is in excellent working condition.

Product Details:

Stanko (Russia) make Heavy Duty Gear Shaping Machine in excellent working condition. The model of the machine is 5B150 and the Maximum Module Capacity is 12 Modules. The machine is complete with its Change Gears, Operating Manual and Electrical Drawings. The technical details are as follows -

Make - Stanko (Russia)
Model - 5B150
Max. Module - 12 module
Length of Stroke - 200 mm
Max. Diameter of Gear - 800 mm
Table Diameter - 800 mm
Distance from Cutter-axis to the Table-axis - 0 mm to 630 mm
Stroke Rates - 33 strokes/min to 188 strokes/min
Table Bore Diameter - 120 mm
Weight of the Machine - 10.2 tons (approximately)
- Motorised Rapid Travels in Spindle Rotation, Table Rotation, & Table Travel.
- Feed Movements can be on Table Rotation and also on Table Longitudinal Travel.
- Complete with Change Gears, Operating Manual & Electrical Drawings.
- Machine is in excellent working condition.

Product Details:

High Speed Gear Shaping Machine made by Sykes (England) in excellent working condition. The model of the machine is V10C and the Maximum Stroke Length is 110 mm. The machine is a complete Auto-Cycle machine with Double-Cut cycle working. The technical details are as follows -

Make - Sykes (England)
Model - V 10 C
Max. Gear Diameter - 254 mm
Max. Stroke Length - 110 mm
Max. Module - 6.3 Module
Stroke Rate - 82 strokes/min to 617 strokes/min
Table Diameter - 254 mm
Table Bore - 76 mm
Spindle Diameter - 68.2 mm
- Complete Auto-Cycle Working.
- Rapid Motorised Rotation of Table and of Cutter Spindle.
- Machine is complete with Change Gears.
- Machine is in excellent working condition.

Product Details:

Drummond (England) make Maxicut No. 2A Gear Shaper Machine in excellent working condition. The machine is complete with its Change Gears, lots of Cutters, Operating Manual and many other accessories. The technical details are as follows -

Make - Drummond (England)
Model - Maxicut No. 2A
Max. Gear Diameter - 180 mm
Max. Module - 4 module
Max. Stroke Length - 50 mm
Stroke Rate - 160 strokes/min to 550 strokes/min
- Complete with its Change Gears, Lots of Cutters & other accessories.
- Machine is in excellent working condition.

Product Details:

Fellows (USA) make Gear Shaper Machine in excellent working condition. The model of the machine is 6A No. 615A and the Maximum Stroke Length is 140 mm. The technical details are as follows -

Make - Fellows (USA)
Model - 6A No. 615A
Max. Gear Diameter - 458 mm
Max. Module Capacity - 6.3 module
Max. Stroke Length - 140 mm
Stroke Rates - 50 strokes/min to 300 strokes/min
Height between Table to Spindle Body - 325 mm
- Complete with Change Gears.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Gear Shaper Machine in excellent working condition. The model of the machine is OH-4 and the Max. Module Capacity is 4 Modules. The machine is complete with its operating manual, electrical drawings, change gears, spare cams and many other accessories. The technical details are as follows -

Make - TOS (Czech Republic)
Model - OH 4
Max. Module - 4 module
Max. Diameter of the Gear - 200 mm
Max. Width of the Gear - 40 mm
Stroke Rate - 224 strokes/min to 630 strokes/min
Max. Cutter Diameter - 4"
- Complete with spare Cams, Change Gears, Mandrels etc.
- Operating Manual, Electrical Drawings, etc. are available.
- Machine is in excellent working condition.

Product Details:

Rack Cutting High Speed Gear Shaper made by Sykes (England) in excellent working condition. The model of the machine is V10B and the Maximum Stroke Length is 110 mm. This machine can be used for Rack Cutting, External Gear Cutting, and for Internal Gear Cutting. It can be used in fully Auto-Cycle Mode and can be used for a 3-Cut Cycle for Gear Cutting. The technical details are as follows -

Make - Sykes (England)
Model - V10B
Max. Gear Diameter - 254 mm
Max. Length of Rack - 1120 mm
Max. Stroke Length - 110 mm
Max. Module - 6.3 Module
Stroke Rate - 51 strokes/min to 460 strokes/min
Clamping Table Size - 1220 mm x 152 mm
Spindle Diameter - 68.2 mm
- Suitable for Rack, External Gear, & Internal Gear Cutting.
- Front Side as well as Back Side Internal Gear Cutting possible.
- Single Cut, Double Cut & 3-Cut Auto-Cycle Gear Cutting possible.
- Complete Auto-Cycle Working.
- Rapid Motorised Travel of Table and of Cutter Spindle Rotation.
- Machine is complete with Change Gears & other accessories.
- Machine is in excellent working condition.

Product Details:

Demm (Italy) make Heavy Duty Gear Shaping Machine in excellent working condition. The model of the machine is SI 8/750 and the Max. Module Capacity is 8 Module and 750 mm is the Maximum Gear Diameter. The Maximum Stroke Length is 150 mm. The machine is complete with its spare Guides, Operating Manuals, Electrical Drawings, Mandrels, many different Cams, Fixtures and many other accessories. The technical details are as follows -

Make - Demm (Italy)
Model - SI 8/750
Max. Module Capacity - 8 Module
Max. Gear Diameter - 750 mm
Max. Stroke Length - 150 mm
Stroke Rate - 42 strokes/min to 240 strokes/min
Distance between Table to Spindle Body - 265 mm
Table Bore - 95 mm
- Operating Manual & Electrical Drawings are available.
- Complete with 3 x spare Guides, many Cams, etc.
- Complete with Mandrels, Fixtures and other accessories.
- Machine is in excellent working condition.

Product Details:

Heavy Duty Gear Shaping Machine made by Stanko (Russia) in excellent working condition. The model of the machine is 5161 and the Maximum Module Capacity is 12 Modules. The maximum Gear Diameter is 1250 mm. The machine is complete with its Change Gears and many other accessories. The technical details are as follows -

Make - Stanko (Russia)
Model - 5161
Max. Module - 12 module
Max. Diameter of Gear - 1250 mm
Max. Length of Stroke - 200 mm
Table Diameter - 1000 mm
Distance from Cutter-axis to the Table-axis - 200 mm to 650 mm
Height from Table-Top to Machine Body - 325 mm
- Automatic Feed Movements on the Travel of Table (for depth of Cut).
- Motorised Rapid Travels on Table Rotation.
- Complete with Change Gears, and many other accessories.
- Machine is in excellent working condition.

Product Details:

Lorenz (Germany) make Gear Shaping Machine in excellent working condition. The model of the machine is SJ 5 and the Maximum Module Capacity is 5 Modules. The technical details are as follows -

Make - Lorenz (Germany)
Model - SJ 5
Max. Module - 5 Module
Max. Gear Diameter - 500 mm
Max. Width of Gear - 75 mm
Stroke Rates - 60 strokes/min to 345 strokes/min
Spindle Diameter - 78 mm
Distance between Table to Spindle Body - 265 mm
- Machine is in excellent working condition.

Product Details:

Make - Lorenz (Germany)model no. -180
Max. Gear Diameter - 180 mm
Max. Module - 4.0 module
Max. Width of Gear - 40 mm
- Machine is complete with it's change gears.
- Machine is in excellent working condition.
 

Product Details:

Make - TOS (Czech Republic)
Model - OH6
Max. Module - 6 module
Diameter of the Gear - 500 mm
Max. Width of the Gear - 90 mm
Stroke Rate - 50 strokes/min to 315 strokes/min
Table Bore - 75 mm
- Complete with Change Gears, operating manuals etc.
- Machine is in excellent working condition.

Product Details:

Make - Drummond (England)
Model - Maxicut 2A
Max. Gear Diameter - 180 mm
Max. Module - 4 module
Max. Stroke Length - 50 mm
Spindle Diameter - 70 mm
Stroke Rate - 160 strokes/min to 550 strokes/min
Angle of Inclination - Changeable.
- Complete with Change Gears.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Gear Shaping Machine in excellent working condition.The model of the machine is OHO 20 and it is a relatively newer model as compared to other TOS make machines.The maximum module capacity is 4 module and the Max. Number of Teeth is 150. The technical details as follows -


Make - TOS (Czech Republic)
Model - OHO 20
Max. Module - 4 module
Max. Gear Diameter - 200 mm
Max. Width of Gear - 50 mm
Stroke Rate - 200 strokes/min to 630 strokes/min
- With Motorised Rapid Rotation of the Table.
- Machine is complete with Change Gears.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Gear Shaping Machine in excellent working condition. The model of the machine is OH-6 and the Max. Module Capacity is 6 modules. The machine is complete with it's change gears and operating manual.The technical details of the machine is as follows -

Make - TOS (Czech Republic)
Model - OH-6
Max. Module - 6 modules
Diameter of the Gear - 500 mm
Stroke Length - 110 mm
Stroke Rate - 50 strokes/min to 315 strokes/min
- Equipped with a Riser Block of 150 mm Height.
- Complete with Change Gears, Chuck etc.
- Operating Manual of the Machine is available.
- Machine is in excellent working condition.

Product Details:

Make - Lorenz (Germany)
Model - SV00
Max. Module - 4 module
Gear Diameter - 180 mm
Length of Stroke - 55 mm
Spindle Diameter - 85 mm
- Complete with lots of spare cutters.
- Complete with change gears, lots of mandrels, & other accessories.
- Machine is in excellent working condition.

Product Details:

Make - TOS (Czech Republic)
Model - OH4 
Max. Module - 4 module
Max. Diameter of the Gear - 200 mm
Max. Width of the Gear - 40 mm
Stroke Rate - 224 strokes/min to 630 strokes/min
Table Bore - 38 mm
- Machine is complete with lots of gear shaping cutters etc.
- With complete set of Change Gears, arbors, mandrels, other accessories etc. 
- Machine is complete with coolant pump. 
- Machine is in excellent working condition.
  

Product Details:

Make - Lorenz (Germany)
Max. Module - 4 module
Max. Gear Diameter - 180 mm
Stroke Length - 55 mm
Stroke Rate - 164 strokes/min to 535 strokes/min
Spindle Diameter - 85 mm
Angle of Inclination - Changeable
- Equipped with Pneumatic Clamping System.
- Complete with Change Gears (~100 pcs).
- Machine is in excellent working condition.

Product Details:

Make - Lorenz (Germany)
Model - SV00
Max. Module - 4 module
Gear Diameter - 180 mm
Length of Stroke - 55 mm
Spindle Diameter - 85 mm
Stroke Rate - 190 strokes/min to 600 strokes/min
- Complete with change gears etc.
- Machine is in excellent working condition.

Product Details:

Make - Stanko (Russia)
Model - 5B161
Max. Diameter of Gear - 1250 mm
Length of Stroke - 200 mm
Max. Module - 12 module
Table Diameter - 1000 mm
Spindle Diameter - 82 mm
Distance from Cutter-axis to the Table-axis - 0 mm to 630 mm
Longitudinal Travel of Table - 630 mm
Weight of the Machine - 10 tons (approximately)
- Feed Movements can be on Table Rotation as well as on Table Travel.
- Motorised Rapid Travels in Spindle Rotation, Table Rotation, & Table Travel.
- Complete with Change Gears, Job Supports etc.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Gear Shaping Machine in excellent working condition. The model of the machine is OH-4 and the Maximum Gear Diameter is 200 mm.The technical details of the machine is as follows -

Make - TOS (Czech Republic)
Model - OH-4
Max. Module - 4 module
Max. Diameter of the Gear - 200 mm
Max. Width of the Gear - 40 mm
Stroke Rate - 224 strokes/min to 630 strokes/min
- Complete with Change Gears & Operating Manual.
- Machine is in excellent working condition.

Product Details:

Make - Lorenz (Germany)
Model - SJ00
Max. Module - 4 module
Gear Diameter - 180 mm
Max. Stroke Length - 55 mm
- Equipped with Hydraulic Tail-Stock.
- Complete with some change gears.
- Machine is in excellent working condition.

Product Details:

Gear Shaper Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is OH 4 and the Max. Module Capacity is 4 Modules. The technical details are as follows -

Make - TOS (Czech Republic)
Model - OH 4
Max. Module - 4 module
Max. Diameter of the Gear - 200 mm
Max. Width of the Gear - 40 mm
Stroke Rate - 224 strokes/min to 630 strokes/min
Max. Cutter Diameter - 4"
- Complete with 3 x spare Cams, Change Gears, Mandrels etc.
- Operating Manual, Electrical Drawings, etc. are available.
- Machine is in excellent working condition.

Product Details:

Fellows (USA) make High-Speed Gear Shaper in excellent working condition. The model of this machine is Number 7 Type and the Max. Gear Diameter is 178 mm (7"). The machine is complete with its Change Gears and Operating Manual. The technical details are as follows -

Make - Fellows (USA)
Model - No. 7 Type
Max. Gear Diameter - 178 mm (7")
Max. Module Capacity - 4 Module (6 DP)
Max. Width of Gear - 38 mm (1.5")
Spindle Diameter - 57 mm (2.25")
- Complete with Change Gears, Accessories etc.
- Operating Manual of the machine is available.
- Machine is in excellent working condition.

Product Details:

Sykes (England) make High Speed Gear Shaping Machine in excellent working condition. The model of the machine is V10C and the Maximum Stroke Length is 101.6 mm. The machine is a complete Auto-Cycle machine with Rough and Finish Cut Feed Travels. The machine is complete with Change Gears and Spur guide as well as a Helical guide. The technical details are as follows -

Make - Sykes (England)
Model - V 10 C
Max. Gear Diameter - 254 mm
Max. Stroke Length - 101.6 mm
Max. Module - 6.3 Module
Stroke Rate - 82 strokes/min to 617 strokes/min
Table Diameter - 254 mm
Table Bore - 76 mm
Spindle Diameter - 68.2 mm
- Complete Auto-Cycle Working.
- Complete with a Spur guide and a spare Helical guide.
- Machine is complete with Change Gears.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Gear Shaper Machine in excellent working condition. The model of the machine is OH 4 and the Max. Module Capacity is 4 Modules. The technical details are as follows -

Make - TOS (Czech Republic)
Model - OH 4
Max. Module - 4 module
Max. Diameter of the Gear - 200 mm
Max. Width of the Gear - 40 mm
Stroke Rate - 224 strokes/min to 630 strokes/min
Max. Cutter Diameter - 4"
- With a lot of cutters, Change Gears, Mandrels, spare cam, etc.
- Operating Manual and Electrical Drawings are available.
- Machine is in excellent working condition.

Product Details:

Stanko (Russia) 5M161 Heavy-Duty Gear Shaping Machine in excellent working condition.The Maximum Diameter of Gear is 1250 mm and the Max.Length of Stroke is 200 mm. The technical details are as follows -

Make - Stanko (Russia)
Model - 5M161
Max. Diameter of Gear - 1250 mm
Max. Length of Stroke - 200 mm
Max. Module - 12 module
Table Diameter - 1000 mm
Stroke Rate - 33 strokes/min to 212 strokes/min
Weight of the Machine - 10.7 tons (approximately)
- Motorised Rapid Travels in Spindle Rotation & Spindle Travel.
- Motorised Rapid Travels in Table Rotation & Table Travel.
- Feed Movements also possible on Table Longitudinal Travel.
- Complete with Change Gears, operating manual, electrical
drawings etc.
- Machine is in excellent working condition.