Milling Machines

Product Details:

KRV (England) make Vertical Turret Milling Machine in excellent working condition. The machine is equipped with Servo Motors and Controller on Longitudinal & Cross Travel and it can work in Manual, Semi-Automatic and complete Automatic mode. The model of the machine is 3000 SLV and the Table Size of the machine is 1475 mm x 305 mm. The technical details are as follows -

Make - KRV (England/Taiwan)
Model - 3000 SLV
Table Size - 1475 mm x 305 mm
Longitudinal Travel - 1016 mm
Cross Travel - 406 mm
Spindle Speeds - 70 rpm to 3600 rpm (Continuously Variable)
Spindle Taper - ISO 40
Spindle Feed Travel - 130 mm
Spindle Diameter - 105 mm
Vertical Travel - 406 mm (Motorised Rapid)
Controller - ProtoTRAK MX2
- Equipped with Ball-Screws & Servo Motors on X and Y Axis.
- Can work in Manual, Semi-Automatic and complete Automatic mode.
- Complete with Accessories like Vice, Tool Holders etc.
- Complete with Operating manual and electrical drawing.
- All manuals of the controller are available.
- Machine is in excellent working condition.

Product Details:

TOS make Heavy-Duty Milling Machine in excellent working condition.The model of the machine is FGS 32/40 and the Table Size is 1400 mm x 400 mm. The machine has two different  spindles - Horizontal & Vertical - both can be used together or independently as well.The technical details are as follows -

Make - TOS-Kurim (Czech Republic)
Model - FGS 32/40
Table Size - 1400 mm x 400 mm
XYZ Travels - 1000 mm x 400 mm x 450 mm
Spindle Taper - ISO 50
Spindle Speeds - 35 rpm to 1800 rpm
Table Feed Rate - 10 mm/min to 1800 mm/min
- Hydraulic Clamping of Tool in both - Horizontal & Vertical - spindles.
- Automatic Up/Down of Table by 0.5 mm.
- Machine is in excellent working condition.

Product Details:

Induma (Italy) make Pure Vertical Milling Machine in excellent working condition. The model of the machine is VM 60 and the Table Size is 1700 mm x 360 mm. The technical details are as follows -

Make - Induma (Italy)
Model - VM 60
Table Size - 1700 mm x 360 mm
XYZ Travel - 1225 mm x 315 mm x 430 mm
Spindle Speeds - 30 rpm to 1500 rpm
Spindle Taper - ISO 50
Table Feed Rates - 10 mm/min to 800 mm/min
- Rotating type Vertical Milling Head.
- Ram Travels in Vertical Milling Head.
- Machine is in excellent working condition.

Product Details:

Pure Vertical Milling Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is FA4V and the Table Size is 1600 mm x 315 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - FA4V
Table Size - 1600 mm x 315 mm
XYZ Travel - 1000 mm x 350 mm x 425 mm
Spindle Speeds - 32 rpm to 1400 rpm
Spindle Taper - ISO 50
Table Feed Rates - 10 mm/min to 1250 mm/min
Quill Travel - 70 mm
Quill Diameter - 180 mm
Swivel angle of Milling Head - +45 Degree to -45 Degree
- Machine is in excellent working condition.

Product Details:

WMW-Heckert (Germany) make Heavy Duty Horizontal & Vertical Milling Machine in excellent working condition. The model of the machine is FQ 400 and the Table Size is 1800 mm x 480 mm. The technical details are as follows -

Make - WMW-Heckert (Germany)
Model - FQ 400
Table Size - 1800 mm x 480 mm
XYZ Travel - 1400 mm x 480 mm x 525 mm
Spindle Taper - ISO 50
Spindle Speeds - 35.5 rpm to 1800 rpm
Feed Rates of Travel - 16 mm/min to 800 mm/min
- Double Swivel type Vertical Milling Head (2 different spindles).
- Vertical Milling Head can be removed to do Horizontal Milling.
- It is a Heavy Duty type Horizontal & Vertical Milling Machine.
- Machine is in excellent working condition.

Product Details:

Huron (France) make Universal Milling Machine in excellent working condition. The model of the machine is KU 5 and the Table Size is 1635 mm x 400 mm. The technical details are as follows -

Make - Huron (France)
Model - KU 5
Table Size - 1635 mm x 400 mm
XYZ Travel - 1300 mm x 700 mm x 450 mm
Spindle Speeds - 30 rpm to 2066 rpm
Spindle Taper - ISO 40
Feed Rates - 1.5 mm/min to 750 mm/min
- Double Swivel type Universal Milling Head.
- Equipped with a 3-Axis DRO.
- Operating Manual of the Machine is available.
- Machine is in excellent working condition.

Product Details:

G. Dufour (France) make Universal Milling Machine in excellent working condition. The model of the machine is 61 and the Table Size is 1100 mm x 275 mm. The technical details are as follows -

Make - G. Dufour (France)
Model - 61
Table Size - 1100 mm x 275 mm
XYZ Travels - 700 mm x 250 mm x 500 mm
Spindle Speeds - 21 rpm to 1600 rpm
Spindle Taper - ISO 40
Table Feed Rates - 10 mm/min to 375 mm/min
- With Bracket (Arbour Support) for Horizontal Milling.
- Equipped with 3-Axis DRO and a foot-operated brake.
- Double Swivel type Vertical Milling Head.
- Rotating type Table.
- Operating Manual of the Machine is available.
- Machine is in excellent working condition.

Product Details:

Gambin (France) make Universal Milling Machine in excellent working condition. The model of the machine is 3M and Table Size is 1520 mm x 385 mm. The Milling Head of this machine is a Double swivel type head capable of Vertical, Horizontal and Angular Milling operations. The technical details are as follows -

Make - Gambin (France)
Model - 3M
Table Size - 1520 mm x 385 mm
XYZ Travel - 1000 mm x 420 mm x 710 mm
Spindle Speeds - 25 rpm to 2000 rpm
Table Feed Rates - 12 mm/min to 630 mm/min
Spindle Taper - ISO 40
- Equipped with a 3-Axis DRO.
- Double-Swivel type Universal Milling Head.
- With Horizontal RAM travel in the Milling Head.
- Complete with Bracket for Horizontal Milling.
- Operating Manuals, Electrical Drawings etc. are available.
- Machine is in excellent working condition.

Product Details:

G. Vernier (France) make Universal Milling Machine in excellent working condition. The model of the machine is FV250 and the Table Size is 1000 mm x 260 mm. The technical details are as follows -

Make - G. Vernier (France)
Model - FV250
Table Size - 1000 mm x 260 mm
XYZ Travel - 710 mm x 260 mm x 475 mm
Spindle Speeds - 28 rpm to 1250 rpm
Spindle Taper - ISO 40
Table Feed Rates - 14 mm/min to 710 mm/min
- Equipped with 3-Axis DRO.
- Equipped with Foot Operated Brake.
- Double Swivel type Vertical Milling Head.
- Machine is in excellent working condition.

Product Details:

Huron (France) make Universal Milling Machine in excellent working condition. The model of the machine is KU 6 and the Table Size is 2000 mm x 420 mm. The Milling Head is a Universal Double Swivel type which is capable of Vertical, Horizontal as well as Angular Milling. The technical details are as follows -

Make - Huron (France)
Model - KU 6
Table Size - 2000 mm x 420 mm
XYZ Travel - 1500 mm x 700 mm x 470 mm
Spindle Speeds - 30 rpm to 2066 rpm
Spindle Taper - ISO 40
Feed Rates - 1.6 mm/min to 760 mm/min
- Double Swivel type Universal Milling Head.
- Equipped with DRO on all the 3-Axis of the Table.
- Operating Manual of the Machine is available.
- Machine is in excellent working condition.

Product Details:

Stanko (Russia) make Double Spindle Vertical and Horizontal Milling Machine in excellent working condition. The Table Size of the Machine is 1700 mm x 400 mm and it is a very versatile machine capable to do Horizontal, Vertical & Angular Milling operations. The technical details are as follows -

Make - Stanko-Import (Russia)
Model - 6P83
Table Size - 1700 mm x 400 mm
XYZ Travels - 1000 mm x 400 mm x 450 mm
Horizontal Spindle Speeds - 31.5 rpm to 1600 rpm
Vertical Spindle Speeds - 50 rpm to 1600 rpm
Horizontal Spindle Taper - ISO 50
Horizontal Spindle Taper - ISO 40
Table Feed Rates - 25 mm/min to 1250 mm/min
Spindle Travel of Vertical Milling Head - 85 mm
- Double Swivel type Vertical Milling Head.
- Over-Arm Travel on the Vertical Milling Head.
- Equipped with 3-Axis DRO.
- Complete with its Electrical Drawings.
- Machine is in excellent working condition.

Product Details:

Heavy Duty Vertical Milling Machine made by TOS (Czech Republic). The model of the machine is FA5V and the Table Size is 2000 mm x 425 mm. It is a Pure-Vertical Milling Machine suitable for heavy duty face milling operations. The technical details are as follows -

Make - TOS (Czech Republic)
Model - FA5V
Table Size - 2000 mm x 425 mm
XYZ Travel - 1400 mm x 450 mm x 450 mm
Spindle Taper - ISO 50
Spindle Speeds - 18 rpm to 1400 rpm
Table Feed Rates - 10 mm/min to 1250 mm/min
Head Swivel Angle - +45 degree to -45 degree
Spindle Quill Diameter - 210 mm
- Machine is in excellent working condition.

Product Details:

Universal Milling Machine made by Gambin (France) in excellent working condition. The model of the machine is 1M and the Table Size is 1290 mm x 270 mm. Gambin machines have a Universal type Double Swivel Milling Head which is capable of Horizontal, Vertical & Angular Milling. The technical details are as follows -

Make - Gambin (France)
Model - 1M
Table Size - 1290 mm x 270 mm
XYZ Travels - 800 mm x 260 mm x 580 mm
Spindle Speeds - 40 rpm to 2,800 rpm
Spindle Taper - ISO 40
Feed Rates of Travel - 10 mm/min to 400 mm/min
- Equipped with a 2-Axis DRO.
- Horizontal RAM travel of the Milling Head.
- Double Swivel type Milling Head for Horizontal, Vertical or Angular Milling.
- Foot Operated mechanism to stop & start the spindle rotation.
- Machine is in excellent working condition.

Product Details:

Pure Vertical Milling Machine made by TOS (Czech Republic) in excellent working condition. The model of the Machine is FA4AV and the Table Size is 1600 mm x 350 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - FA4AV
Table Size - 1600 mm x 350 mm
XYZ Travels - 1050 mm x 350 mm x 425 mm
Spindle Taper - ISO 50
Spindle Speeds - 32 rpm to 1400 rpm
Table Feed Rates - 10 mm/min to 1250 mm/min
Quill Diameter - 180 mm
Quill Travel - 90 mm
Spindle Motor - 7.5 kW
Vertical Head Rotation - +45 degree to -45 degree
- Machine is in excellent working condition.

Product Details:

Remac (Italy) make Universal Milling Machine in excellent working condition. The Table Size of the Machine is 1100 mm x 280 mm and it is a pendant-controlled machine. The technical details are as follows -

Make - Remac (Italy)
Table Size - 1100 mm x 280 mm
XYZ Travel - 800 mm x 250 mm x 450 mm
Spindle Speeds - 32 rpm to 1660 rpm
Spindle Taper - ISO 40
Table Feed Rates - 8 mm/min to 300 mm/min
- Rotating type Universal Table.
- Complete with vice and some other accessories.
- Machine is in excellent working condition.

Product Details:

Gambin (France) make Universal Milling Machine in excellent working condition. The model of the machine is 11M and the Table Size is 1290 mm x 300 mm. The machine has a Double Swivel type milling head suitable for Vertical, Angular and Horizontal Milling operations. The technical details are as follows -

Make - Gambin (France)
Model - 11M
Table Size - 1290 mm x 300 mm
XYZ Travel - 800 mm x 300 mm x 630 mm
Spindle Speeds - 25 rpm to 1,800 rpm
Spindle Taper - ISO 40
Feed Rates of Travel - 12 mm/min to 630 mm/min
- Machine is equipped with DRO.
- Double Swivel type Milling Head for Horizontal, Vertical or Angular Milling.
- Operating Manual and Electrical Drawings are available.
- Foot Operated mechanism to stop & start the spindle rotation.
- Machine is in excellent working condition.

Product Details:

Heavy Duty Vertical Bed Milling Machine made by Rambaudi (Italy) in excellent working condition. The model of the machine is the Ram-Mill 15 and the Table Size is 1600 mm x 510 mm. It is suitable for Heavy Duty Milling operations as well as Vertical Boring operations. The machine is equipped with 3-Axis DRO and is complete with lots of accessories and tooling. The technical details are as follows -

Make - Rambaudi (Italy)
Model - Ram-Mill 15
Table Size - 1600 mm x 510 mm
XYZ Travel - 1200 mm x 500 mm x 525 mm
Max. Height between Table & Spindle - 650 mm
Spindle Speeds - 40 rpm to 3000 rpm
Spindle Taper - ISO 50
Feed Rate of Travel - 24 mm/min to 1000 mm/min
Spindle Downward Feed Travel - 150 mm
Spindle Diameter - 140 mm
Spindle Motor - 11 kW
- Equipped with 3 - Axis DRO.
- Complete with lots of Tooling, Cutters & Accessories.
- With Automatic Tool Clamping.
- Suitable for Heavy Duty Milling and Boring operations.
- Machine is in excellent working condition.

Product Details:

Universal Milling Machine made by Induma (Italy) in excellent working condition. The model number of the machine is NL 63 and the Table Size is 1700 mm x 350 mm. The technical details are as follows -

Make - Induma (Italy)
Model - NL 63
Table - 1700 mm x 350 mm
XYZ Travel - 1200 mm x 350 mm x 475 mm
Spindle Speed - 30 rpm to 1500 rpm
Spindle Taper - ISO 50
Feed Rates of Travel - 10 mm/min to 800 mm/min
Spindle Motor - 12.5 HP
- Rotating Type Universal Table.
- Equipped with a Parking type Vertical Milling Head.
- Machine is in excellent working condition.

Product Details:

Universal Milling Machine made by Huron (France) in excellent working condition. The model of the machine is NU 5 and the Table Size is 1635 mm x 460 mm. The Milling Head is a Universal Double Swivel type which is capable of Vertical, Horizontal as well as Angular Milling. The technical details are as follows -

Make - Huron (France)
Model - NU 5
Table Size - 1635 mm x 460 mm
XYZ Travel - 1300 mm x 700 mm x 500 mm
Spindle Speeds - 30 rpm to 2066 rpm
Spindle Taper - ISO 50
Feed Rates - 1.6 mm/min to 820 mm/min
- Double Swivel type Universal Milling Head.
- Equipped with a 3-Axis DRO.
- Machine is in excellent working condition.

Product Details:

Maho (Germany) make Universal type Tool Room Milling Machine in excellent working condition. It is a very versatile milling machine capable of Vertical, Horizontal & Angular Milling and as well as Boring operations. The table of the machine can be rotated 360 degrees and it can also be tilted along both the axes. The technical details are as follows -

Make - Maho (Germany)
Model - MH 600
Table Size - 720 mm x 410 mm
XYZ Travels - 500 mm x 400 mm x 400 mm
Vertical Clamping Table - 250 mm x 1030 mm
Spindle Speeds - 40 rpm to 2000 rpm
Feed Rate - 5 mm/min to 500 mm/min (Infinitely Variable)
Spindle Taper - ISO 40
Spindle Automatic Feed Travel - 80 mm
- Table can be rotated as well as tilted along both axes.
- Hydraulic Locking of XYZ & B-Axis Movements of Table.
- Hydraulic Clamping of the Tool Holder.
- Equipped with 3-Axis DRO.
- Complete with its Operating Manual, Electrical Drawings etc.
- Machine is in excellent working condition.

Product Details:

Alcera (France) make Universal Milling Machine in excellent working condition. The model of this machine is AL6-U and the Table Size is 1200 mm x 280 mm. The technical details are as follows -

Make - Alcera (France)
Model - AL6-U
Table Size - 1200 mm x 280 mm
XYZ Travel - 800 mm x 250 mm x 425 mm
Spindle Speed - 32 rpm to 1000 rpm
Spindle Taper - ISO 40
Table Feed Travel Rate - 16 mm/min to 260 mm/min
- Double Swivel type Vertical Milling Head.
- Rotating type Universal Table.
- Machine is in excellent working condition.

Product Details:

Breda (Italy) make Vertical Milling Machine in excellent working condition. It is a small sized machine having a Table Size of 800 mm x 250 mm. The technical details are as follows -

Make - Breda (Italy)
Table Size - 800 mm x 250 mm
Longitudinal Feed Travel - 470 mm
Spindle Speeds - 68 rpm to 2,000 rpm
Vertical Ram Travel - 75 mm
- Automatic Feed Movement on Longitudinal Travel.
- Machine is in excellent working condition.

Product Details:

Cincinnati (USA) make Double Spindle Milling Machine in excellent working condition. The Table Size of the machine is 1385 mm x 255 mm and it is capable of Horizontal, Vertical and Angular Milling operations. The technical details are as follows -

Make - Cincinnati (USA)
Table Size - 1385 mm x 255 mm
XYZ Travel - 670 mm x 225 mm x 375 mm
Horizontal Spindle Speeds - 25 rpm to 1500 rpm
Horizontal Spindle Taper - ISO 50
Vertical Spindle Speeds - 100 rpm to 1030 rpm
Vertical Spindle Taper - ISO 50
Table Feed Rates of Travel - 6.35 mm/min to 760 mm/min
Center Height of Dividing Head - 140 mm
- Double Swivel type Vertical Milling Head.
- Equipped with a Dividing Head & Tail-Stock.
- Over-Arm Travel suitable for extra width jobs.
- Rotating type Table.
- Machine is in excellent working condition.

Product Details:

Alcera (France) make Universal Milling Machine in excellent working condition. The Table Size of the machine is 1100 mm x 265 mm and it is equipped with a Double Swivel type Milling Head. The technical details are as follows -

Make - Alcera (France)
Table Size - 1100 mm x 265 mm
Longitudinal Travel - 775 mm
Cross Travel - 210 mm
Spindle Speed - 32 rpm to 1000 rpm
Spindle Taper - ISO 40
Table Feed Travel Rate - 16 mm/min to 262 mm/min
- Double Swivel type Vertical Milling Head.
- Automatic Feed Movements on X-Axis & Y-Axis Travels.
- Machine is in excellent working condition.

Product Details:

Pure Vertical Milling Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is FA 4V and the Table Size is 1600 mm x 315 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - FA 4V
Table Size - 1600 mm x 315 mm
XYZ Travel - 950 mm x 315 mm x 300 mm
Spindle Speeds - 32 rpm to 1400 rpm
Table Feed Rates - 10 mm/min to 1250 mm/min
Quill Diameter - 180 mm
Swivel angle of Milling Head - +45 Degree to -45 Degree
- Machine is in excellent working condition.

Product Details:

Heavy-Duty Double Spindle Milling Machine made by TOS (Czech Republic) in excellent working condition. The model of the machine is FGS 32/40 and the Table Size is 1400 mm x 400 mm. The machine also has a feature of Automatic Up & Down  Table Travel by 0.5 mm. It is one of the latest models of the conventional milling made by TOS company. The technical details are as follows -

Make - TOS (Czech Republic)
Model - FGS 32/40
Table Size - 1400 mm x 400 mm
XYZ Travels - 1000 mm x 400 mm x 450 mm
Spindle Taper - ISO 50
Spindle Speeds - 35 rpm to 1800 rpm
Table Feed Rate - 10 mm/min to 1800 mm/min
Spindle Motor - 11 kW
- Automatic Up/Down of Table by 0.5 mm.
- Equipped with 3-Axis DRO.
- Hydraulic Clamping of Tool.
- Operating Manual & Electrical Drawings are available.
- With Bracket & its support for Horizontal Milling.
- Machine is in excellent working condition.

Product Details:

Ernault Somua (France) make Universal Milling Machine in excellent working condition. It is a Bed type Milling Machine in which the Vertical & Cross Travels are through the movement of the whole column. The Table moves only in the Longitudinal direction. The model of the machine is Z1C and the Table Size is 1200 mm x 300 mm. The technical details are as follows -

Make - H. Ernault Somua (France)
Model - Z1C
Table Size - 1200 mm x 300 mm
XYZ Travel - 710 mm x 250 mm 400 mm
Spindle Taper - ISO 40
Spindle Speeds - 40 rpm to 2000 rpm
Table Feed Rates - 12.5 mm/min to 500 mm/min
- Bed type Milling - with Vertical & Cross Travels on the Column Movement.
- Equipped with 3-Axis DRO.
- Double Swivel type Vertical Milling Head.
- Machine is in excellent working condition.

Product Details:

Ajax (Spain) make Vertical Milling Machine in excellent working condition. The model of the machine is AJT-1 and the Table Size is 1270 mm x 255 mm. The machine is equipped with 3-Axis DRO and has Motorized Feed & Rapid Travels in the Longitudinal Travels. The technical details are as follows -

Make - Ajax (Spain)
Model - AJT-1
Table Size - 1270 mm x 255 mm
Longitudinal Travel - 710 mm (Motorized)
Cross Travel - 360 mm
Spindle Speeds - 48 rpm to 3750 rpm
Spindle Feed Travel - 127 mm
Spindle Taper - ISO 40
Spindle Diameter - 85 mm
Spindle Feed Rates - 0.04 mm/revolution to 0.16 mm/revolution
- Automatic Motorized Feed & Rapid Movements in Longitudinal Travel.
- Equipped with a 3-Axis DRO.
- Machine is in excellent working condition.

Product Details:

Rigiva (Italy) make Horizontal Milling Machine in excellent working condition. The machine is equipped with an Automatic Indexing Rotary Table which also has Automatic Longitudinal Movement. This attachment can work in Auto-Cycle mode and will Automatically stop after the required number of indexes. The technical details are as follows -

Make - Rigiva (Italy)
Table Size - 1000 mm x 255 mm
Rotary Table Diameter - 250 mm
Hydraulic Feed Movement of Table - 125 mm
XYZ Travels of Table - 700 mm x 200 mm x 375 mm
Spindle Speeds - 22 rpm to 1200 rpm
- Automatic Indexing of the Rotary Table.
- Automatic Longitudinal Movement of the Rotary Table.
- Countdown Counter for Automatic Stopping.
- Table of the machine can be Rotated.
- Machine is in excellent working condition.

Product Details:

Orav (Italy) make Double Spindle Vertical & Horizontal Milling Machine in excellent working condition. The machine is complete with Arbour & Bracket for Horizontal Milling Operations and has a separate Vertical Milling Head. The machine is equipped with a 3-Axis DRO. The technical details are as follows -

Make - Orav (Italy)
Model - Labiena BM
Table Size - 1500 mm x 340 mm
XYZ Travel - 1025 mm x 300 mm x 450 mm
Horizontal Spindle Taper - ISO 40
Vertical Spindle Taper - ISO 40
Horizontal Spindle Speeds - 21 rpm to 1350 rpm
Vertical Spindle Speeds - 55 rpm to 1750 rpm
Feed Rates of Travel - 0 mm/min to 1000 mm/min
Max. Weight of Job - 500 kg.
Machine Weight - 3.90 Tons Approximately.
- Over-Arm Travel of Vertical Head Slide for Extra Wide Jobs.
- With Arbour & Bracket for Horizontal Milling Operations.
- Automatic Hydraulic Clamping of Tools.
- Operating Manual & Electrical Drawings are available.
- Equipped with a 3-Axis DRO.
- Machine is in excellent working condition.

Product Details:

Jaspar (Belgium) make Universal Milling Machine in excellent working condition. The Table Size of the machine is 950 mm x 220 mm. The machine is complete with its Vertical Milling Head, Vice and Bracket for Horizontal Milling. The technical details are as follows -

Make - Jaspar (Belgium)
Model - 2CR
Table Size - 950 mm x 220 mm
X Travel (Motorised Feed) - 600 mm
Spindle Taper - ISO 40
Spindle Speeds - 47.5 rpm to 750 rpm
Table Feed Rates - 11.8 mm/min to 118 mm/min
Cross Travel of Table - 240 mm
- with Double Swivel type Vertical Milling Head.
- with Bracket for Horizontal Milling operations.
- Complete with Vice.
- Machine is in excellent working condition.

Product Details:

Huron (France) make Bed Milling Machine in excellent working condition. The model of the machine is PU 771 and the Table Size of the machine is 2235 mm x 700 mm. It is suitable to do Vertical, Angular & Horizontal Milling as it is equipped with a Double-Swivel type Milling Head. The technical details are as follows -

Make - Huron (France)
Model - PU 771
Table Size - 2235 mm x 700 mm
XYZ Travel - 1900 mm x 1000 mm x 1000 mm
Spindle Taper - ISO 50
Spindle Speeds - 30 rpm to 2066 rpm
Feed Rate - 8 mm/min to 850 mm/min (Continuously Variable)
Weight of Machine - 8.0 tons (Approx.)
- Equipped with 3-Axis DRO.
- Universal type Milling Head for Vertical, Horizontal and Angular Milling.
- Operating & Maintenance Manual, Electrical Drawings, etc are available.
- Complete with a Cube Table.
- Machine is in excellent working condition.

Product Details:

Arno-Nomo (Italy) make Double Spindle Universal Milling Machine in excellent working condition. The Table Size of the Machine is 1550 mm x 350 mm. The Vertical Milling Spindle and the Horizontal Milling Spindle can be used independently of each other.  The technical details are as follows -

Make - Arno-Nomo (Italy)
Table Size - 1550 mm x 350 mm
XYZ Travel - 1100 mm x 325 mm x 425 mm
Horizontal Spindle Speeds - 40 rpm to 1700 rpm
Horizontal Spindle Taper - ISO 50
Vertical Spindle Speeds - 25 rpm to 1500 rpm
Vertical Spindle Taper - ISO 40
Table Travel Feed Rate - 10 mm/min to 880 mm/min
Over-Arm Horizontal Travel - 700 mm
- Double Swivel type Vertical Milling Head.
- Spindle Travel in Vertical Milling Head.
- Rotating type Table.
- Machine is in excellent working condition.

Product Details:

Nomo (Italy) make Heavy Duty Bed Milling Machine in excellent working condition. The model of the Machine is F.B.F. 2200 and the Table Size is 2500 mm x 600 mm. The machine is equipped with a 3-Axis DRO and is complete with its electrical drawings and the operating manual. The technical details are as follows -

Make - Nomo (Italy)
Model - F.B.F. 2200
Table Size - 2500 mm x 600 mm
XYZ Travel - 2180 mm x 680 mm x 800 mm
Horizontal Spindle Taper - ISO 50
Horizontal Spindle Speeds - 30 rpm to 1450 rpm
Vertical Spindle Taper - ISO 50
Vertical Spindle Speeds - 25 rpm to 1500 rpm
Feed Rates of Travel - 5 mm/min to 1000 mm/min (Infinitely Variable)
Over-Arm Travel of the Vertical Milling Machine - 650 mm
Horizontal Spindle Motor - 11 kW
Vertical Spindle Motor - 7.5 kW
Max. Distance between Table Top & Vertical Spindle - 865 mm
- Equipped with a 3-Axis DRO.
- Electrical Drawings & Operating Manuals are available.
- Machine is in excellent working condition.

Product Details:

TOS (Czech Republic) make Universal Milling Machine in excellent working condition. The model of the machine is FA3H and the Table Size is 1250 mm x 300 mm. The technical details are as follows -

Make - TOS (Czech Republic)
Model - FA3H
Table Size - 1250 mm x 300 mm
XYZ Travels - 750 mm x 250 mm x 330 mm
Spindle Speeds - 45 rpm to 2000 rpm
Spindle Taper - ISO 40
Feed Rates of Travel - 14 mm/min to 900 mm/min
- Complete with Bracket & Arbour for Horizontal Milling.
- Complete with Vertical Milling Head.
- Machine is in excellent working condition.

Product Details:

F.I.L. (Italy) make Heavy Duty Bed Milling Machine in excellent working condition. The model of the Machine is FU 200 and the Table Size is 2500 mm x 600 mm. The technical details are as follows -

Make - F.I.L. (Italy)
Model - FU 200
Table Size - 2500 mm x 600 mm
XYZ Travel - 2150 mm x 600 mm x 1000 mm
Horizontal Spindle Taper - ISO 50
Horizontal Spindle Speeds - 25 rpm to 1200 rpm
Vertical Spindle Taper - ISO 50
Vertical Spindle Speeds - 24 rpm to 1600 rpm
Feed Rates of Travel - 5 mm/min to 1000 mm/min (Infinitely Variable)
Max. Distance between Table & Vertical Spindle - 1000 mm
- Machine is in excellent working condition.

Product Details:

Stanko (Russia) make Universal Milling Machine in excellent working condition. The model of the machine is 6T82 and the Table Size is 1325 mm x 320 mm. The technical details are as follows -

Make - Stanko (Russia)
Model - 6M82
Table Size - 1325 mm x 320 mm
XYZ Travel - 700 mm x 255 mm x 400 mm
Spindle Speeds - 31.5 rpm to 1600 rpm
Table Feed Rate - 25 mm/min to 1250 mm/min
- Double Swivel type Vertical Milling Head.
- Machine is in excellent working condition.

Product Details:

G. Vernier (France) make Universal Milling Machine in excellent working condition. The model of the machine is FV3S and the Table Size is 1500 mm x 320 mm. The technical details are as follows -

Make - G. Vernier (France)
Model - FV3S
Table Size - 1500 mm x 320 mm
XYZ Travel - 1000 mm x 300 mm x 500 mm
Spindle Speeds - 32 rpm to 1500 rpm
Spindle Taper - ISO 40
Table Feed Travel Rate - 9 mm/min to 440 mm/min
- Complete with Bracket for Horizontal Milling.
- Double Swivel type Vertical Milling Head.
- Machine is in excellent working condition.

Product Details:

Rapid (Italy) make Automatic Horizontal Slot Milling Machine in excellent working condition. This machine is used for Horizontal Milling of Keyways, Slots, Notches and Groves in an automatic cycle. The technical details are as follows -

Make - Rapid (Italy)
Model - 200NK
Max. Width of Slot - 25 mm
Max. Length of Slot - 200 mm + Tool Diameter
Max. Depth of Slot - 50 mm
Table Size - 850 mm x 220 mm
XYZ Travel of Travel - 400 mm x 200 mm x 300 mm
Max. Length of Slot by using Table Travel - 600 mm
Spindle Speeds - 250 rpm to 2000 rpm
Quill Diameter - 100 mm
Rate of Automatic Depth - 0.05 mm/stroke to 0.7 mm/stroke
- Automatic Working with Auto-Depth Increasing.
- Machine is in excellent working condition.

Product Details:

Vertical Turret Milling Machine made by Bridgeport (USA) in excellent working condition. The Table Size of the machine is 1070 mm x 230 mm and it is equipped with 2-Axis DRO. The technical details are as follows -

Make - Bridgeport (by Adcock-Shipley)
Table Size - 1070 mm x 230 mm
Longitudinal Travel - 700 mm
Spindle Speeds - 67 rpm to 4600 rpm
Spindle Travel - 127 mm
Spindle Diameter - 85 mm
- Equipped with 2-Axis DRO.
- Machine is in excellent working condition.